ZEBRA L10A Glacier Computer Instruction Manual
- June 5, 2024
- ZEBRA
Table of Contents
ZEBRA L10A Glacier Computer
Highlights
**** This Android 10 GMS release 10-30-02.00-QG-U02-STD-HEL-04 covers L10A family of products. Please see Device Compatibility under Device Support Section for more details.
LifeGuard patches are cumulative and include all previous fixes that are part of earlier patch releases.
Software Packages
Package Name | Description |
---|---|
HE_DELTA_UPDATE_10-30-02.00-QG-U06-STD-HEL-04.zip | LG Package Update |
Security Updates
This build is Compliant up to Android Security Bulletin of June 01, 2022.
LifeGuard Update 06
- This LG patch is applicable for 10-30-02.00-QG-U00-STD-HEL-04 BSP version.
New Features
- Added support for querying touch mode, MX version and WLAN properties in OEM
Resolved Issues
- SPR46220 – Resolved an issue wherein intermediate files were being retained along with snoop logs when BT Snoop logging was enabled in
- SPR45910 – Resolved an issue wherein user was not able to enable Hotspot using EMDK/Stage Now after SIM card was .
- SPR46231 – Resolved an issue wherein upon scanning while in chrome browser resulted in tab switching instead of displaying barcode
- SPR46101/45372 – Resolved an issue wherein Velocity App updated via play store was getting deleted post an OS update on a device enrolled with MS INTUNE
- SPR46227 – Resolved an issue wherein BT headsets were experiencing distorted audio when it was operating in Narrow band
- SPR46162 – Resolved an issue wherein user was not able to use USB keyboard when access to USB storage from computer was disabled using MX Access Mgr
Usage Notes
-
10-16-10.00-QG-U120-STD-HEL-04 is not applicable for L10A devices with Display ZBR_R47 and touch EXC86H82.
- To identify display type, users can check ‘ro.config.device.display’ property using getprop command from
- Devices with new display ZBR_R47 will have [ro.config.device.display]: [513]
- Devices with display EP101R1912N1000TG will have [ro.config.device.display]: [2001]
- To identify touch type, users can check ‘ro.config.device.touch property using getprop command from
- Devices with new touch EXC86H82 will have [ro.config.device.touch]: [32770]
- Devices with touch EXC3161 will have [ro.config.device.touch]: [32768]
-
BMI270/ICM42607 Gyroscope/accelerometer sensor devices require 10-30-02.00-QG-U02-STD- HEL-04 or higher to ensure full G-sensor functionality.
-
The installed Gyroscope/Accelerometer sensors can be identified either in SETTINGS or via ADB command:
SETTINGS
- Devices with BMI270/ ICM42607 Gyroscope/accelerometer sensor will list sensor type as BMI270/ ICM42607 on “Settings–>About phone–>SW components–>Gyroscope” or “Settings–>About phone–>SW components — >Accelerometer”.
ADB
-
Check the ro.config.device.gyro & ro.config.device.accelerometer property using getprop command from
-
Devices with BMI270 Gyroscope/accelerometer sensor will have ro.config.device.gyro = 32 ro.config.device.accelerometer=120
-
Devices with ICM42607 Gyroscope/accelerometer sensor will have ro.config.device.gyro = 260 ro.config.device.accelerometer=2052
Version Information
Below Table contains important information on versions
Description | Version |
---|---|
Product Build Number | 10-30-02.00-QG-U06-STD-HEL-04 |
Android Version | 10 |
Security Patch level | June 01, 2022 |
--- | --- |
Component Versions | Please see Component Versions under Addendum section |
Known Constraints
- Picture quality of the image taken with ‘Night Mode’ in low-light conditions is
- Trigger Modes: Presentation Read Mode is preferred over Continuous Read Mode. If using Continuous Read mode, use a lower illumination brightness setting (e.g., 2) to ensure the scanner can work without
- “Red Eye Reduction” feature disables the camera flash in the Hence, to enable the camera flash please disable the ‘Red Eye Reduction’ feature.
- EMM does not support agent persistence in OS dessert downgrade
- Reset packages of Oreo should not be used on devices running with A10
- In-order to avoid any inconsistencies in Settings UI it is recommended to wait for a few seconds after the device boots
- Transparent blue overlay in camera view –numeric, character or ENTER key presses in camera view will make this blue overlay appear. The camera is still functional; however, the view is covered with the blue overlay. To clear this, press the TAB key to move the control to a different menu item or close the camera app.
- In case of an OS upgrade from a s/w version having higher security patch level to a s/w version having lower security patch level, user data will be
- Unable to scan remote company network using ES file explorer over
- When phone app is being disabled using MDM and user tries to reboot the device, user might see Recovery Screen with “Try again” and “Factory data reset” options. Select option “Try again” to continue the reboot process. Do not select option “Factory data reset”, as it will erase the user
- AppManager actions only apply to the applications on the device at the time “DisableGMSApps” is New GMS applications present in any new OS update will not be disabled following that update
- After upgrading from Oreo to A10, Device shows “SD card setup” notification, which is expected behavior from
- After upgrading from Oreo to A10, staging fails on few packages, user must update package names accordingly and make use of the profiles or create new staging
- At the very first time, DHCPv6 enable through CSP is not reflecting until user disconnect/reconnect to the WLAN
- Stagenow package name has been changed to com.zebra.devicemanager, This can cause issues with AE enrollments and locking down an unit like with EHS or EMM lockdowns. This Issue will be fixed on June 2022 LifeGuard
Important Links
- Installation and setup instructions (if the link does not work, please copy it to browser and try)
Note : “As part of IT security best practices, Google Android enforces that the Security Patch Level (SPL) for the new OS or patch must be the same level or a newer level than the OS or patch version currently on the device. If the SPL for the new OS or patch is older than the SPL currently on the device, then the device will enterprise reset and wipe all user data and settings including user network configurations and remote management tools which would render the device inaccessible over a network.”
Device Support
Device Compatibility
This software release has been approved for use on the following devices.
Device Family| Part Number| Device Specific Manuals and
Guides
---|---|---
L10A| RTL10B1-xxxxxxxxxxNA (North America) RTL10B1-xxAxxX0x00A6 (ROW)
Note: ‘x’ Stands for wild card for different configurations
| RTL10B1-xxAxxX0x00IN
(India)
RTL10B1-xxxxxxxxxxRU (Russia)
| L10A Home Page
| | |
Addendum
Component Versions
Component / Description | Version |
---|---|
Linux Kernel | 4.4.205 |
AnalyticsMgr | 2.4.0.1254 |
Android SDK Level | 29 |
Audio (Microphone and Speaker) | 0.35.0.0 |
Battery Manager | 1.1.7 |
Bluetooth Pairing Utility | 3.25 |
Camera | 2.0.002 |
DataWedge | 8.2.703 |
EMDK | 9.1.4.3204 |
Files | 10 |
License Manager and License Agent | version 6.0.8 and version 6.0.34.5.0.2 |
--- | --- |
MXMF | 10.5.0.89 |
NFC | NFC_NCIHALx_AR18C0.a.3.0 |
OEM info | 9.0.0.699 |
OSX | QCT.100.10.12.69 |
RXlogger | 6.0.4.0 |
Scanning Framework | 28.11.5.2 |
StageNow | 5.3.0.4 |
WLAN | FUSION_QA_2_1.3.0.044_Q |
Baseband | W220429A_021.1-1-00889 |
Zebra Bluetooth Settings | 2.3 |
Zebra Data Service | 10.0.3.1001 |
Android Webview and Chrome | 87.0.4280.101 |
Revision History
Rev | Description | Date |
---|---|---|
1.0 | Initial release | June 25, 2022 |
References
- Welcome | Zebra Developer Portal
- Android Security and Update Bulletins | Android Open Source Project
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>