Shenzhen OSCWM00 Cloud WiFi Camera User Manual

: June 5, 2024
: Shenzhen

Shenzhen OSCWM00 Cloud WiFi Camera User Manual

!

1、Main Function Description

!

2、How To Download APP

Search “YCC365 Plus”in Apple Store or Android app store and download.  Scan the QR code and download.

3、How to Connect Camera Add Device

3.1 Register an account

When you use this app at the first time, you need to use your email to register anaccount, click”Sign Up”and set a password according this procedure,or choose Longinwith mobile phone mumber.  If you forget your password, you can reset your password, just click “Forgot password” on the login page.  Password should be at least 6 characters and not longer than 26 characters,It shouldbea combination of letters and numbers.

Only support mobile phone number registration in some regions. Please

use email to register in other areas.

3.2 Connect the camera

Note: Camera only supports 2.4G WIFI before adding devices, make sure your router is 2.4GWIFI, and your phone is connected to 2.4G Wi-Fi.

3.2.1 、Scan code to add

Please make your phone connect to the Wi-Fi.  Select your own 2.4GWi-Fi and enter your password.(5G network is notsupported).  Scan the camera lens toward the QR code of the phone,(Align the QR code with cameralens at a distance of 10-20cm)Hear a voice prompt,Click”When you hear a beepor agreen linght”after hearing the beep, Keep the camera cas close as possible to the router, The connection process takes about 1-2minutes,after you will hear welcome tousecamera.

3.2.2 Addition by connection to network cable (Only support Lan port

device)

Click the button in the upper right comer on the apphomepage.
Choose the device type intelligent camera,choose the addition by connecting to
network cable.  Plug in the power to the camera,Device network port is connected to the network cableScan device body QR code,put the QR code on the device body into the box and scanit.  Please wait patiently ,The connection process takes about 1-2minutes,after you will hearM welcome to use camer

3.2.3 Addition of AP hotspot

Click the button in the upper right comer on the apphomepage.

Choose the Addition of AP hotspot,Plug in the power to the camera,Wait patienty for the device light to blink or hear a tone,Click Next whendone.
If you don’t see any tips,try resetting your device,Find the reset button,Long press for at least 5s,click next after prompted.
please go to the Wi-Fi list and connect the Wi-Fi in the blue field “CLOUDCAM_XXXX” Select the Wi-Fi that matches the prefix and connect Return to APP after successful connection.
After connecting the device successfully click next,Choose your router Wi-Fi,Enter Wi-Fi password,Click confirm,Addition is successful,then your can preview thescreen.

3.3 AP Direct mode (special)

Open the YCC365plus app to enter the login interface, click “Local login”.
Click the button in the upper right “+” on the apphomepage.
Click “APnetworked device preview” and Click “Next” .
Go to Setting Network click your phone connect to “CLOUDCAM_XXXX”network.
Network setting set the Wi-Fi has been connected with this device and Click “Next”.
Enter user Name: admin Password: 12345 Click “Next”, then your can previewthescreen.

4、Function introduction

Real-time preview interface

4.1 PTZ/ Preset

 PTZ
By sliding steering wheel or sliding the screen on the live preview can control the camera’s
rotation . 1、Turn off camera. 2、PTZ reset . 3、Click the presets icon to enter the preset management interface. 4、Light. 5、Shere family . Picture for reference
Since different cameras have different functions, the actual display interface shall prevail

4.2 Video playback

A: Select “View Playback” at the bottom right corner of the live interface to viewthe
playback video of the camera. B: Switch playback path, you can choose to watch cloud playback/memory card playback

5 Preferences

Click ” ” in the preview screen check the parameter menu

Picture for reference

Since different cameras have different functions, the actual display interface shall prevail

6、Split screen to watch（Only for multiple equipment underthe same account)

Click on the split screen button to realize simultaneous preview of multiple devices Note：
More than two machines, with split screen function.

7、How to use a camera on a computer

Log In:www.ucloudcam.com

Enter your account number and password,click to Login

8 、 Frequently asked questions

1、Can’t add the device？

A、Please make sure the camera has been reset, Press the Reset button until hear theprompt tone.
B、Only support 2.4GHZ Wi-Fi, if your Wi-Fi router is 5GHZ, please switch to 2.4/5GHZ dual mode.
C、Please turn on the GPS service before adding the device on the Android mobil phone, After installation is complete, you will be asked to turn on GPS service when you use theapp at the first time, if you choose not to turn on the GPS service, please uninstall andreinstall the app again.  D、Please confirm the camera wasn’t binding by the other account.
There are four voice prompts in the progress.  1）“Please configure camera by AP hotspot or scanningcode”.  2）Select your Wi-Fi and login with your password, after the device makes a noise like“beep”you will hear this “Please wait for Wi-Fi connecting”.  3）“Please wait for internet connecting”after getting the Internet ipaddress.  4）“Internet connected welcome to use cloud camera”.  A、If you can’t go to the second step, please check your Wi-Fi channel is not hidden, andthe Wi-Fi router can’t be so far from the camera, If this way doesn’t work, please scanthe QR code to add the camera.  B、If you can’t go to the third step, please reduce the number of the Wi-Fi users, anddelete the special characters of your Wi-Fi password.  C、If you can’t go to the forth step, please try again, if it still doesn’t work, please contact
the seller. 2、Why does it Intermittent video recording ?
The size of the video file is limited,Once the video size close to the critical value, the
video file will be created and the next video will continue to be recorded, there is a
interval but so short. 3、Why does the camera is disconnected?
Please check Wi-Fi or whether the power switch is normal,If it’s normal,Please Restart
camera,Or delete the camera in the APP and Please reconnect thecamera. 4、How to add family email account ?
Comer on the App homepage,Click Settings to choose a shared device,Add family Email. 5、How many people access an account at the same time?
There is no limit to the number of people who can access the account,But thesame
camera can support 3 peoples to view the same time. 6、Cannot recognize TF card?
Please check whether the TF card meets the quality requirements.If the Wi-Fi signal is
poor, it may be that the card cannot be read. 7. After the cloud service expires, the recording timeline is blank.
After the cloud service expires, the video cannot be replayed. If there is no TF card inthe camera, the video cannot be recorded.
If the TF card can always work, but the video file disappeared, please check the “Check
TF card” status.  If it is normal in the application but no video has been recorded, please format the TF
card. If it still cannot be used, please replace it with a new TF card and try again. 8、Cannot read the wireless network name after connecting to the iphone First,IOS and Android devices need to enable locationpermissions.  Connect the iPhone to the Wi-Fi network through configuration, and then add the
camera, which can automatically read the network name. 9、Why can’t I switch to another account to configure the camera WIFI? The camera can only be bound to one account, and other accounts can only be viewedthrough the sharing mechanism, If other accounts need to reconfigure the camera, please use the APP in the delete camera first. 10、How to connect my camera to other Wi-Fi?
Two ways:
A: When you need to change to another Wi-Fi without moving the location. Parametersetting >> Network information >> Select Wi-Fi. B:When the camera is replaced and no other WIFI can be found,please try resetting your
device,in the app homepage will prompt “device offline”, click “Troubleshooting”, reset thecamera, and then add WIFI again.

After-sales instructions

The product is subject to the actual product, this manual is for referenceonly.
The product is updated in real time,If there are any upgrades without notice,please check the official website.
This manual introduces the basic functions of the product,please check and operate by yourself.
If you have any problems when using the camera, please contact the supplier or company in time.
We have tried our best to ensure the completeness and accuracy of the contents in themanual, but some data may still exist.
If there is any deviation, if you have any questions or disputes, please referto the final explanation of the company.
If you do not follow the instructions in the manual, you will bear any responsibility.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body