KENWOOD HBM60 Triblade XL+ Hand Blender Instructions
- June 5, 2024
- KENWOOD
Table of Contents
KENWOOD HBM60 Triblade XL+ Hand Blender Instructions
Before Use
Please read the user instructions carefully and completely before using the
appliance
and retain for future reference. Remove all packaging and labels and dispose
them appropriately.
Caution
-
The blades are very sharp!
To avoid injuries, please handle blades with utmost care. -
Care shall be taken when handling the sharp cutting blades, emptying the
bowl and during cleaning. -
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
-
Children shall not play with the appliance.
-
This appliance shall not be used by children.
-
Children shall be kept away from the appliance and its mains cord.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Always switch off and unplug the appliance when it is left unattended and before assembling, disassembling, cleaning and storing.
-
Before plugging into a socket, check whether your voltage corresponds with the voltage printed on the bottom of the appliance.
-
This appliance is designed for household use only and for processing normal household quantities.
-
Do not use the appliance for any purpose other than the intended use described in the user manual. Any misuse may cause potential injury.
-
Do not use any part in the microwave.
-
Please clean all parts before first use or as required, following the instructions in the Care and Cleaning section.
Parts and Accessories
- Variable speed regulator
- Variable speed button (on/off)
- Turbo button (T)
- Motor part
- Twist lock
- Blender shaft
- Beaker
- Whisk accessory
- Gearbox
- Whisk
- Puree accessory
- Gearbox
- Puree shaft
- Paddle
- 500 ml chopper accessory «mc»
- Lid (with gear)
- Chopping blade
- Chopper bowl
- Anti-slip rubber ring
How to Use the Appliance
Variable speed regulator
When activating the variable speed button (2), the processing speed
corresponds to
the setting of the variable speed regulator (1). The higher the setting, the
faster the chopping speed. You can adjust the speed conveniently during
operation by turning the speed regulator.
Maximum processing speed can be achieved by pressing the Turbo button (3). You may also use the Turbo button for instant powerful pulses without having to manipulate the speed regulator.
Blending Shaft (A)
The hand blender is perfectly suited for preparing dips, sauces, salad dressings, soups, baby food, as well as drinks, smoothies and milkshakes.
For best results, use the Turbo speed.
Assembly and Operation
- Place the motor part (4) on the blender shaft (6) and turn the twist lock (5) counter-clockwise until it audibly clicks into place.
- Place the blending shaft into the mixture to be blended. Then switch the appliance on.
- Blend ingredients to the desired consistency using a gentle up-and-down motion.
- After use, unplug and turn the blending shaft clockwise (6) to remove the hand blender
Caution
- If using the appliance to purée hot food in a saucepan or pot, remove the saucepan or pot from the heat source and ensure the liquid is not boiling. Allow hot food to cool slightly to avoid risk of scalding.
- Do not let the hand blender sit in a hot pan on the cooktop when not in use.
- Do not operate continuously for longer than 1 minute.
- Let the appliance cool down for 3 minutes before you continue processing.
Recipe Example: Mayonnaise
250 g oil (e.g. sunflower oil)
1 egg and 1 extra egg yolk
1–2 tbsp. Vinegar
Salt and pepper to taste
- Place all ingredients (at room temperature) into the beaker in the order as above.
- Place the hand blender at the bottom of the beaker. Blend at maximum speed until the oil starts emulsifying.
- With the hand blender still running, slowly raise the shaft to the top of the mixture and back down to incorporate the rest of the oil.
NOTE: Processing time: approx. 1 minute for salads and up to 2 minutes for a thicker mayonnaise (e.g. for dip).
Whisk Accessory (A)
Use the whisk only for whipping cream, beating egg whites, making sponge cakes
and ready-mix desserts.
Assembly and Operation
-
Attach the whisk (8b) to the gearbox (8a).
-
Align the motor part and the assembled whisk and turn the parts together until you hear them click into place.
-
After use, unplug and turn the whisk clockwise (8) to detach the motor part.
Then pull the whisk out of the gearbox. -
Do not operate continuously for longer than 3 minutes.
Let the appliance cool down for 3 minutes before you continue processing.
Tips for Best Results
- Move the whisk clockwise while holding it at a slight incline.
- To prevent splattering, start slowly and use the whisk accessory in deep containers or pans.
- Place the whisk in a bowl and only then switch the appliance on.
- Always ensure the whisk and mixing bowl are completely clean and free of fat before whisking egg whites. Only whip up to 4 egg whites.
Recipe Example: Whipped Cream
1.8 cups / 400 ml chilled cream (min. 30 % fat content, 4 – 8 °C / 39 – 46 F)
- Start with low speed and increase the speed while whipping.
- Always use fresh chilled cream to achieve greater and more stable volume when whisking.
Puree Accessory (B)
The puree accessory can be used to mash cooked vegetables and fruits such as potatoes, sweet potatoes, tomatoes, plums and apples.
Before Use
- Do not mash hard or uncooked food, asthis may damage the unit.
- Peel and remove any stones or hard parts; cook and drain then mash the fruit/
vegetable.
Assembly and Operation
-
Fit the gearbox (9a) to the shaft (9b) by turning in a clockwise direction until it locks into place.
-
Turn the puree accessory upside down and fit the paddle (9c) over the central hub and turn counter- clockwise to locate. (If the gearbox is not fitted properly, then the paddle will not secure in place).
-
Align the motor part and the assembled masher and turn the parts together until you hear them click into place. Plug in.
-
Dip the puree accessory into the ingredients and switch on the appliance.
-
Using a gentle up and down motion, move the puree accessory through the
ingredients until the desired texture is achieved. -
Release the variable speed button and ensure the puree accessory has completely stopped turning before removing it from the food.
-
After use, unplug and turn the masher clockwise (9) to detach the motor part.
-
Remove the paddle (9c) by turning it clockwise and separate the gearbox (9a) from the shaft (9b).
Caution
- Never use the puree accessory in a saucepan over direct heat.
- Always remove the saucepan from the heat and allow to cool slightly.
- Sit the saucepan or bowl on a stable, flat surface, and support it with your free hand.
- Do not tap the puree accessory on the side of the cooking vessel during or after use. Use a spatula to scrape excess food away.
- For best results when mashing never fill a saucepan or bowl more than half full with food.
- Do not process more than one batch without interruption.
- Let the appliance cool down for 4 minutes before you continue processing.
Recipe Example: Mashed Potatoes
1 kg cooked potatoes
200 ml warm milk
- Place the potatoes in a bowl and mash for 30 seconds with speed Turbo.
- Add the milk. Resume mashing for another 30 seconds.
Chopper Accessory (C)
The chopper (10) is perfectly suited for chopping meat, hard cheese, onions, herbs, garlic, vegetables, bread, crackers and nuts.
Use the «mc» chopper (10) for larger quantities and for hard foods.
For «mc» chopper do not exceed the quantity of ingredients higher than max line.
For «hc» chopper do not exceed the quantity of ingredients higher than max line. Maximum operation time for the «hc» chopper: 1 minute for large amounts of wet ingredients, 30 seconds for dry or hard ingredients.
NOTE: leave an interval of at least 3 minutes before operating again (To
prevent
faults). Immediately stop processing when motor speed decreases and/or strong
vibrations occur.
Refer to the Processing Guide C for maximum quantities, recommended times and speeds.
Before Use
- Pre-cut foods into small pieces for easier chopping.
- Remove any bones, tendons and gristle from meat to help prevent damage to the blades.
- Make sure the anti-slip rubber ring (10e) is attached to the bottom of the chopper bowl.
Assembly and Operation
- The blade (10b) is very sharp! Always hold it by the upper plastic part and handle it carefully.
- Place the blade on the center pin of the chopper bowl (10d). Press it down and give it a turn so that it locks into place.
- Fill the chopper with food and put on the lid (10a).
- Align the motor part and the chopper and turn the parts together until you hear them click into place. Plug in.
- To operate the chopper, switch on the appliance. During processing, hold the motor part with one hand and the chopper bowl with the other.
- Always chop harder foods (e.g. parmesan cheese) at full speed.
- After use, unplug and turn the motor part (4) to detach.
- Lift the lid up. Carefully take out the blade before pouring out the contents of the bowl. To remove the blade slightly turn it then pull it off.
Caution
- Do not use the chopper accessory to process extremely hard foods, such as unshelled nuts, ice cubes, coffee beans, grains, or hard spices e.g. nutmeg. Processing these foods could damage the blades.
- Never place the chopper bowls in the microwave oven.
«hc» Recipe example: Honey-Prunes (as a pancake stuffing or spread)
50 g prunes
75 g creamy honey
70 ml water (vanilla-flavoured)
- Fill the «hc» chopper bowl with prunes and creamy honey
- Store at 3 °C in refrigerator for 24 hours.
- Add 70 ml water (vanilla-flavoured).
- Resume chopping for another 1,5 seconds at maximum speed.
Use the chopper accessory «hc» (optional accessory available at your Kenwood Service Center; however not in every country).
Care and Cleaning (D)
-
Always clean the hand blender and the suitable accessories thoroughly for first
use and after every use with water and detergent. -
Unplug hand blender before cleaning.
-
Do not immerse the motor part (4) or gearboxes (9a) in water or any other liquid. Clean with a damp cloth only.
-
The lid (10a) can be rinsed under running water. Do not immerse in water, nor place in a dishwasher.
-
All other parts can be cleaned in a dishwasher. Do not use abrasive cleaners that could scratch the surface.
-
You may remove the anti-slip rubber ring from the bottom of the bowl for an extra thorough clean.
-
When processing foods with high pigment content (e.g. carrots), the accessories may become discolored. Wipe these parts with vegetable oil before cleaning them.
Warranty and Service
If you experience any problems with the operation of your appliance, before requesting assistance refer to the “troubleshooting guide” section in the manual or visit www.kenwoodworld.com.
Please note that your product is covered by a warranty, which complies with
all legal
provisions concerning any existing warranty and consumer rights in the country
where the product was purchased.
If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorized KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country
Both the design specifications and these user instructions are subject to change without notice.
Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Kenwood Service Center or at appropriate collection points provided in your country.
Materials and accessories coming into contact with food conform to EEC regulation 1935/2004.
Troubleshooting Guide
Problem | Potential Causes | Solution |
---|---|---|
Hand blender does not operate. | No power | Check appliance is plugged in. Check |
the fuse /circuit breaker in your home. If none of the above contact Kenwood Service.
For UK Only
Guarantee Information
All Kenwood products carry a minimum guarantee period of one year. The rights and benefits under this guarantee are additional to your statutory rights which are not affected. Please keep your receipt as this will form the basis of your guarantee.
In the unlikely event of a breakdown you have access to professional help from our team simply by calling: 0345 222 0458
For service in the Republic of Ireland please call: 012475471
Kenwood undertakes within the specified period to repair or replace any part of the appliance, free of charge (with the exception of any glass or porcelain-ware incorporated in the product) found to be defective provided that;
- We are promptly informed of the defect.
- The product is used and maintained in accordance with the User Instructions.
- The appliance has not been altered in any way or subjected to misuse or repair by a person other than an authorised service agent for Kenwood.
- No rights are given under this guarantee to a person acquiring the appliance second hand or for commercial or communal use.
- Any repaired or replaced appliance will be guaranteed on these terms for the unexpired portion of the guarantee.
- The need for repair has not been caused by insufficient aftercare or cleaning: or
damage caused by the chemical or electro chemical effects of water.
Under no circumstances shall the application of this guarantee give rise to the complete replacement of the appliance or entitle the consumer to damages.
Kenwood Ltd, New Lane, Havant, Hampshire PO9 2NH
www.kenwoodworld.co.uk
Thank You for choosing Kenwood. We are confident that you will get excellent service from this product.
TO IMPROVE YOUR EXPERIENCE
Register now at www.kenwoodworld.co.uk
By registering we may send you from time to time details on exclusive offers, promotions, recipes and inside tips.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>