DroiX AYANEO NEXT Pro Handheld Gaming PC Controller Instruction Manual
- June 5, 2024
- DroiX
Table of Contents
DroiX AYANEO NEXT Pro Handheld Gaming PC Controller
Read the manual at https://www.ayaneo.com/manual before using AYANEO.
You can also read the paper manual that comes with the package.
Boot and shut down
Press the power button for 2 seconds to start AYANEO. During the boot process, the indicator light between the two Type-C at the top is always on. The fan will work at the maximum speed. After the self-check, it will return to normal speed and the indicator light will go out. Press and hold the power button for two seconds in the power-on state, and a pull-down shutdown menu will pop up at the top of the screen. Press and hold the power button, touch and slide down (slide to turn off the computer) to complete the AYANEO shutdown operation. Or click on the lower left corner of the screen: Window button> Powers Shut down to turn off AYANEO. Press and hold the power button for 8 seconds in the power-on state to forcibly shut down AYANEO. It is not recommended to force this operation in normal use scenarios.
Sleep and Wake
Press the power button in the power-on state to quickly enter the sleep state, or click the window button in the lower left corner of the screen> Power>Sleep to put AYANEO into the sleep state. In the sleep state, the indicator light between the two Type-Cs at the top is in a regular breathing state. The cooling fan will stop rotating. Click the power button in sleep state to wake up AYANEO, Windows Hello has been configured for fingerprint security login. In the sleep state, touch the power button with the registered fingerprint finger for about 2 seconds to wake up directly, or touch the power button to wake up the screen and then touch the fingerprint to enter the OS interface without entering the PIN and password to log in. After successfully recognizing and waking up, the indicator light between the two Type-Cs on the top goes off, and the cooling fan rotates normally. It takes 1-3 seconds to wake up under different interfaces to complete the wake-up.
Battery and Charging
Do not try to replace the AYANEO battery by yourself, you may damage the battery, resulting in overheating, fire and personal injury. The lithium-ion battery of AYANEO should be operated or recycled under the instructions provided by AYANEO. It must be recycled separately from household waste. Please dispose of the battery in accordance with local environmental regulations. The battery can only be replaced by AYANEO or AYANEO authorized service provider. Replacement with the wrong type of battery may cause an explosion. When Type-C is plugged into the power upply, avoid prolonged contact between the skin and the plug, otherwise, it may cause discomfort or injury. Please use the included adapter to charge AYANEO. Do not use an adapter without safety certification to charge AYANEO. It may cause damage to internal components and unpredictable danger.
Cleaning
Please use a lint-free cloth to clean AYANEO. Do not let any opening get damp
or use aerosol sprays, solvents or abrasives.
Medical equipment interference
Some components inside AYANEO include magnets and radio emission
electromagnetic fields. These electromagnetic fields may interfere with
medical equipment, pacemakers., defibrillators, or other medical equipment.
Please keep a safe distance between the medical equipment and AYANEO. Please
consult your physician and medical device manufacturer for medical device
information. If you suspect that AYANEO interferes with your pacemaker,
defibrillator or other medical equipment, please stop using AYANEO
AYANEO guarantees that all hardware products and accessories will be within
one year from the date of the original retail purchase. AYANEO does not
guarantee normal wear and tear, nor does it
guarantee damage caused by accidents or abuse. To obtain services, please
visit AYANEO mall or AYA
authorized service provider. The available service options depend on the
country or region where the requested service is located and may be restricted
to the original country and region of sale. Depending on your location, you
may have to pay for phone calls and international shipping costs. When you
submit a valid claim according to the warranty service policy, AYANEO will
repair, replace or refund your AYANEO as appropriate. Your warranty rights are
in addition to the powers provided by local consumer laws. When you make a
claim under this warranty policy, you may need to provide details of the proof
of purchase.
Support
For support and troubleshooting information, driver software, and the latest
AYA Space downloads, please visit www.ayaneo.com
FCC compliance
This device complies with the specifications in Part 15 of the FCC Rules. The
operating device must meet the following two conditions: (1) This device will
not cause harmful interference; (2) This device can withstand any external
interference, including interference that may cause unintended operation.
EU compliance
AYANEO hereby declares that this wireless device complies with the directive
2014/53/EU 
Power on / Sleep / Wake up / Fingerprint
- In the shutdown state, press and hold the switch button for 2 seconds to turn on AYANEO.
- In the power-on state, click the power button to put it into a sleep state, and in the sleep state, click to wake it up.
- Support fingerprint recognition, log in with a Microsoft account, Settings> Account> Login options > Fingerprint recognition (Windows Hello), enter and enable fingerprint security login.
- Windows Hello users who have configured fingerprint security to log in can wake up directly to the OS interface by tapping the power button with their registered fingerprints for about 2 seconds, or tap the power button to wake up the screen and then tap to identify the fingerprint to enter the OS interface, No need to enter PIN and password to log in.
- Long press for 8 seconds to force shutdown.
Volume-/ Volumet+ 3
- When the machine is turned on, tap Volume + to increase the volume step by step, long press to continuously increase the volume. Tap Volume-to decrease the volume.
Audio Interface 4
- 3.5 mm headphone jack.
Full-featured TYPE- C Interface 5 6
- ss USB 3.2
4 PD 30 fast charge
DP1.4 video output
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the Folowing measures:
- Reorient or relocate the receiVing antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Specific Absorption Rate (SAR) information:
This Communicator meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluations
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health. FCC
RF Exposure Information and Statement the SAR limit of the USA (FCC) is 1.6
W/kg averaged over one gram of tissue.
Device types: Communicator has also been tested against this SAR limit. This
device was tested for typical body-worn operations with the back of the phone
keeping Omm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain an Omm separation distance between
the user’s body and the back of the phone. The use of belt clips, holsters,
and similar accessories should not contain metallic components in their
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements and should be avoided.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>