NITROX Myway V2 Lithium 400W Elscooter User Manual
- June 5, 2024
- NITROX
Table of Contents
Myway V2 Lithium 400W Elscooter
Myway
Operation Manual
Congratulation on your new perchase.
when i stand the design of e-scooter I envisioned a new world where leaving
the car behind would be on easy decision.
After three year of design and development,we focusing on every detail,the
e-scooter offers no compromises ,the riding experience, folding and unfolding
,or between the rides,we created e-scooter to be an integrated parts of your
life .
Enjoy ,happy for riding ,returned home safe
Within the shelf-life.if any of the following reasons cause failure,damsge are
notwithin the scope of warranty:
1, Not in accordance with operation instruction manual to do proper
maintenance and protection .
2, Electric scooter dangerous actions, such as used for other purposs
stunt,thus result in produet damage or function failure.
3, Any dismantling or use outside the original spare parts 4, Using the wrong
or traffic accidents or function failure. 5, In abnormal road use of damage or
function. 6, Operating lease imporper use or unauthorized use. 7, Causes
natural disasters or man-made causes of force majeure. 8, Don’ t use this
produet for a long time exposure to sunlight or placed
outdoors for long time, so will lead to the produet rapid aging and function
disorder.
This produet only for Reereation and Entertainment , never is a normal main
transportation means to use. Our eompany has Update the produet
appearanee,make ehanges in the lunetions and parameters adjustment right .li
there are any ehanges will not notiee additionally,We reserve the right to
explain the terms ol the event.
Nordbutiker i Sverige AB Gösvägen 28 76141 Norrtälje 08-522 309 80
[email protected]
Page 33
Table Of Contents
400W E-scooter Feature…………………………………………………………….. 3 400W E-scooter Main
Parts…………………………………………………………. 4-5 700W E-scooter
Feature…………………………………………………………….. 6-7 700W E-scooter Main
Parts………………………………………………………… 8-9 Colorful Reflection Backgrounds display
Operation Manual……………. 1 O Blue Reflection Backgrounds display Operation
Manual…………………. 11 Warnings & General Information………………………………………………….. 12-13
Serial Number………………………………………………………………………….. 14 Opening&Folding
E-scooter………………………………………………………… 16-19 Charger And
Battery………………………………………………………………….. 20-21
Operation………………………………………………………………………………… 22-23 Safety/Air Pressure Of
Tire…………………………………………………………. 24 Riding Operation………………………………………………………………………..
25-26 Maintenance Of thee-scooter……………………………………………………… 28 Maintenance of Flat
tire………………………………………………………………. 29 Maintenance…………………………………………………………………………….. 30
Specifications &Parameter…………………………………………………………. 31
Warranty………………………………………………………………………………….. 32
Page 01
400W E-scooter Shape
·- – – – – – f} — —,
o——
1.Brake 3.Turn Light 5.Liquid Crystal Display 7.Handlebar
Page 02
2.LED Light 4.Horn Switch 6.Accelerator 8.T Tube
Specifications &Parameter
400W
700W produet spceification
performance
motor charger
tires brake light
Rated output power
350w
Rated voltage
36V
Battery capacity
10.4/15.6/18.2 AH
Mileaqe
38/50/60Km I h
Rated output power
500w
Rated voltaQe
48V
Battery capacity
10.4/13/15/18 AH
Range
35/45/58/68Km I h
Dimensions
11Ox56x120cm
Front and rear center distance 850mm
WeiQht
With battery 15.5kg
Max. load
120kg
Max speed
:,s;35km/h
Climbing angle
10 Degree slope
Battery Type
The ternary lithium electricity
Motor
DC brushless motor
Max.Rotating speed 1300rpm
Max.Output torque
9.5N.m
Input voltage
AC100-240V
Output Current
3A
Charging time
5-8H
A single consume power 0.6KWh
Tires size
10Inch
Tires type
The pneumatic tire
Brake type
front and rear with dic-brake
LED
front light with horn
Page 31
Maintenance
Lubrication
In the clutch sleeve folding handle dropped into a small amount of lubricating
oil or lubricant to do maintenance on every six months Note:Do not use WD40
(anti-rust oil) to lubricate the produet parts, do not lubricate the front and
rear, if in doubt, consult your dealer.
Tire
When the brake performance begins to decline, you can adjust the brake line
regulator to achieve the required sensitivity.lf the brake lines regulated,
braking performance is still poor, or the sound of the brakes need to replace
the brake pads are looking for produets reseller.
The produet is equipped with a lithium battery can be recharged 800 times,
each time with a full charge when the distance is too short, you need to
replace the lithium battery.
General Troubleshooting
Check the list
When the produet does not operate normally, pls.checkactions have been
completed as follow:
· The power switch has been opend or not · Power full or not · Braked or not ·
All sockets and connectors are clean and accurate link It the above actions
have switched to complete but the produet still does not operate normally,
consult your dealer
Page 30
400W E-scooter Feature
– – – – – – – – – – – – ,Jlj
——- ®
9.Front Light 11.PneumaticTyre Pf 10inch 13.Quick Release 15.Battery Charge Interface 17.RearTyre 19.High Efficiency Brushless Hub Motor 21.Removable Of Maintenance Accessibility
10.Aluminium Alloy Wheel Hub 12.Wire Harness 14.Lock/Release Button 16.Footboard 18.3D ReflectorT! urn Light 20.Kickstand
Page 03
400W E-scooter Main Parts
Quick Fold Systerm Lock/Release S Button
3D Reflector
Footboard And Footgrip
Rear Disc-brake
Battery Charge Interface Page 04
Maintenance of flat tire
1. Make sure the escooter is unplugged and powered off. 2. Place escooter on
a high stable surface where it is placed only on it’ s
body ,so that rear and front wheels will be in the air. 3. Use tools open both
rear plastic covers 4. Easy Take the motor cable out from right of escooter 5.
Use 15-18 hex to disassemble motor nuts and motor. 6. Remember the exact arder
and place of washers on each side of the motor. 7. Used professional spoons
(not plastic or small ones)to dismount tire from
motor, be careful not to damage the motor, rim,tire and tude, use liquid soap
around the rim to tir slid out of the rim . 8. Fix or replace tube 9. Put the
ire back in place. Use liquid soap around the rim to put the tir back in place
. Do not use any tools for placing back tir on the rim, use hands only.
1O.Check that your repair is completely done by pumping air to 45 psi. lnto
the wheel . 11.ln arder to put escooter back together do all the steps in
reverse arder.
Nake sure the escooter is unplugged and powered off.
Page 29
Maintenance of thee-scooter
Escooter was assembled by professional people. Any attempt to independently
fix or change escooter or pars of it in any. Will cause damage to the escooter
“quick” escooter, and will cancel the manufacturer warranty given upon
delivery.
Required Tools
General Utilty Tool
400W E-scooter Main Parts
Maintenance of plastic cover
Accelerator I Switch Button/ Battery lndicator
LEDfront light/speed control switch (left tast right slow)/horn switch
15-18 Hex Page 28
Quick release
Page 05
Kickstand
700W E-scooter Shape
f·j —–
0 ____,
1.brake 3.turn light 5.colorful display 7.handlebar
Page 06
2.LED light 4.horn switch 6.accelerator 8.T tube
Maintenance of thee-scooter
Driving Technique
Driving Technique Turns-the turns on scooter are done as on
surf/ski/snowboard. The handlebar should be in parallel to the body. Befare
turning look at the apporaching direction and make sure turning is safe.
Braking–tilt your weight backwards so that the brake action will come though
the feets and not trough the handlebar and steering systerm. It is best to
learn how to adjust the center of gravity during stopping, otherwise there is
a dual concern: forward turning over ( “syopy” )and /or wear and breaking of
the handlebar and steering systerm.
Page 26
700W E-scooter Feature
————– æ
–
,————–® ,———- ®
—- – – – – – – – – – – — – – – – – – – – – – – – – – —
9.front light 11.pneumatic tyre ol 10inch 13.Ouick release 15.battery charge
interface 17.rear tyre 19.high elficiency brushless hub motor 21.removable ol
maintenance accessibility
Page 07
10.aluminium alloy wheel hub 12.wire harness 14.lock/release button 16.footboard 18.rear light 20.kickstand
700W E-scooter Main Parts
Quick Fold Systerm Lock/Release S Button
Rear Light And Turn Light
Footboard And Footgrip
Rear Disc-Brake
Page 08
Battery Charge Interface
Driving Technique
Safe Driving 1. Knowing escooter -get to know escooter befare drivingit .test
your control ave it . Make your turns and cautiously and give yourself stoping
distance. 2. Your driving capability–to gain control over your
scooter,practice your frist ride on escooter in an open space with no
abstacles to disturb you .
Driving Technique Foot position–before riding put your foot as possible to the
front aection of the scooter, and your other foot on the ground .Make sure
taht your driving route is clear. To start riding boost yourself forwards(as
on non-motorized scooters)with your foot that is on the ground. lmmediately
atter press the thumb throttle downwards ,tilt your body forwards do you
shouldn’ t fall backwards during acceleration, escooter will be in motion.
Avoid your body pressure on the handlebars in acceleration and
deceleration,keep ane foot behind ,another is front (it’ s more comfortable to
place ane foot forward and the other ane turned backwards at 70-90,like on
skate/surfboard.)it iwll help you gain more stability .
Riding,just like most sports , involves risks of injury and damage.by chooing
to ride escooter the responsibility and all inherent risk ison you. It is
crucual that your know, understand and aet according to safety rules.
Page 25
Safety/Air Pressure Of Tire
Warning
Certain countries or regions safety devices or gear. It is your responsibility
to know the state laws and follow them .
Tires air pressure Air pressure in tires: 40psi to 50 psi
Safty equipment Helmet:most serious injuries taht occur while ride are head
injuries. This could have been prevented if a helmet had been worn. You must
wear a helmet while rideing your escooter .the helmet must be worn according
to its instructions.
Mechanical safety tests Befare using escooter; perform a bisual inspection
that screws and nuts are tight and in place. Note if anything looks amiss,or
is showing signs of wear. lf you are unsure,bring your escooter to the
authorized distributor. Tires and wheels: Check the tires for wear, it can be
by rotating the tire to check to ensure that the need to replace the tires in
good condition. Ensure normal rotation of the wheels during braking, if not,
please get the scooter to the authorized distributor.Before each ride, always
check your brakes and mechainical function.
As you accelerate ,lean forwards,as you brake, tilt your weight backwards.
Page 24
700W E-scooter Main Parts
Maintenance of plastic cover
Accelerator I Switch Button/ Battery lndicator
LEDfront light/speed control switch (left fast right slow)/horn switch
Quick release
Page 09
Kickstand