neofect PB Smart Pegboard User Guide
- June 5, 2024
- neofect
Table of Contents
Smart Pegboard
Quick Guide
Ver.1.0.0
1. Components Overview
The following are the components and accessories of your Neofect Smart Pegboard.
1| Base Unit| X 1| This is the base of the pegboard, LED, LCD and
buttons included.
---|---|---|---
2| Standard Pegs| X 63| These pegs are used for the standard board,
3| Mixed Shape Pegs| X 20| These pegs are used for the mixed shape
board.
4| Pinch Pegs| X 35| These pegs are used for the pinch board.
5| Charger| X 1| This charger is needed for supplying power.
6| Standard Board| X 1| This board will be attached to the base
unit.
7| Mixed Shape Board| X 1| This board will be attached to the base
unit.
8| Pinch Board| X 1| This board will be attached to the base unit.
9| Quick Guide (IFU)| X 1| This is the instruction manual with a
summarized explanation of pegboard use.
– The charger and the cable may appear different from images shown on this manual.
2. How to Use Smart Pegboard
1) How to Turn the Smart Pegboard ON / OFF
– ON : Connect the power cable and push the [START] button .
– OFF : Push the [STOP] button for 4 seconds.
– Disply is off after 10 minutes of inactivity.
– The power turns off after 1 hour of inactivity.
- For a 10000mAh potable battery-Usable for 6hours.
2) Placing the board
Put the board on the base unit.
– The base unit automatically recognizes the board and proceeds with the
training for each board.
3) Setting up the Affected Side
Set the affected side with the [START] button.
– From the direction where the [START] button is pressed, you can use the
display and the button.
4) Controlling the Volume
When using the pegboard, you can control the volume to suit the user’s
conditions.
5) Setting Language
You can set the screen and audio language separately in
3. Type of Training
There are several training types you can perform with your Smart Pegboard.
– The default training type may differ, as each board has its own optimized
training.
Freestyle
Place the pegs anywhere you want.
Visual Training 1
Place the pegs in the given rows.
Shape Completion
Place the pegs to complete the shape.
Blackout
Completely fill the whole board with pegs.
Row Completion
Place the pegs in the given rows.
Visual Training 2
When prompted, place the peg in the middle or at the end.
Shape Recognition
Use the correct peg shape.
Randomizer
Place the pegs in the lit location.
Smash a Mole
Whack the moles before they go away.
Memory Placement
Memorize the lit locations and place the pegs.
Simon Says 2
Memorize the sequence and place the pegs in reverse order.
Find Home
Place pegs to help guide blinking light through to its destination.
Snake Trap
Trap the snake’s body with a peg.
Simon Says 1
Memorize the sequence and place the pegs.
Pathfinder
Connect all three lights to make a path.
4. Type of Training
You can use the training function in the following steps.
1) Training
Select
2) Detail Training
Make the detailed choices like level.
3) Options
You can control the time limit, hint time and the speed of lights.
4) Explanation
After reading the explanation on training, press the [START] or [ ] button to
begin.
5) Training information
- When you start the training, you will be guided by a voice assistant.
- During the training, you can check your progress in real time on the screen.
- You can listen again voice guide with [ ]button.
- You can get hint with [ ] button.
6) Paused
You can pause the training with the [STOP] button and go on the training with
[START] button.
7) Results
- You can see your results either the training is complete or by pressing the [STOP] button to quit.
- You can check the results of your recent training sessions on the
menu.
– Here you will see your most recent results.
– You can also check your older results by flipping over the pages.
5. Session Training
Through session training you can carry out different types of training at one go without pressing any buttons.
1) Session Training
Press the [START] button in order to select detailed training in the
preferable order.
2) Detail Training
The training proceeds in the selected order.
3) Results
After 15 seconds, the training result screen will automatically move on the
next training session.
6. Session Training
| Category | Description |
|---|---|
| Temperature / Storage Temperature | 0 ~ 35 (℃) / -20 ~ 70 (℃) |
| Humidity & Storage Humidity | 15 ~ 90 (%) |
| Time of Continued Usage | 8 hrs |
7. Detailed Device Specifications
| Category | Description |
|---|---|
| Device Name | Neofect Smart Pegboard |
| Model Name | PB |
| Objectives | Manual Dexterity / Visual Motor integration / Visual |
Cognition and Shape Recognition
Dimensions| 557(W) x 353(H) x 32(D) mm
Weight| 6.32kg
Sensor| Hole sensor (Magnetic Recognition)
Recognition : 7mm
LED| Type : High illuminance, 5V LED
LCD| 4.3’’ TFT-LCD
Speaker| Built-in speaker for auditory feedback
Power 1.2W
Charger Type| Micro USB 5pin
8. Quick Manual Information
| Category | Description |
|---|---|
| Document No | IFU-RSP_C |
| Version | V 1.0.0 |
| Date | March 25, 2020 |
9. Certification
MSIP-REM-NeO-PB-01
Product : Neofect Smart Pegboard
Model : PB
Input : 5V – 1.5A
Output : –
Manufacturer : NEOFECT Co., Ltd.
Country of manufacture : Korea
Product : Neofect Smart Pegboard
Model : PB
Input : 5V -1.5A
Output : –
Manufacturer : NEOFECT Co., Ltd.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
We Inspire Hope
© NEOFECT. All Rights Reserved.