Neofect CHEMION CHM-3000 Bluetooth LED Glasses Instruction Manual
- June 13, 2024
- neofect
Table of Contents
Neofect CHEMION CHM-3000 Bluetooth LED Glasses
INSTRUCTION
For instructions, please access website or scan above QR code
PRECAUTIONS
-
When this product comes into contact with water, the product’s causes failure and electric shock.
-
Be careful not to be exposed to snow, rain, and moisture, and it is not recommended to use it in places with high humidity.
-
Don’t put a firearm around this product.
-
Don’t put too much shock or imprint on this product.
-
Don’t drop this product from a high place.
It causes damage. -
When charging the product, use the cable provided.
Wearing it for a long time can cause eye strain or dizziness. If the symptom occurs, please refrain from wearing it -
If you exercise, walk, dance, drive, or cross the road while wearing or after wearing this product, accidents may occur due to a narrowed field of view, so be careful.
-
This product is not sunglasses.
Please wear sunglasses in the sunlight. -
Some fast charger can cause product damage due to overheating. So please make sure to use safety verified adapter with rated voltage of 5.0V /3A
-
Please note that the device may cause radio interference during operation
-
Charging time and usage time may vary depending on the usage environment.
-
If it becomes fully charged, disconnect the charging cable.
-
Do not connect the charging cable when the surface temperature of the product is high
-
We are not responsible for malfunction caused by the users careless handling
-
We are not responsible for product failure caused by remodeling or repairing
-
When used by children, they may be injured due to carelessness or incorrect operation, thus please use it under the guidance of a guardian.
Manufacturer: Neafect Ca., Ltd.
Praduct Name: Color CHEM ION
Model : CHM-3DDD
Usage time : 5 hour (Max)
Recharge : USB C-type
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>