True Wireless Sleep Earbuds, Omidyi Noise Blocking Headphones-Complete Features/Owner’s Gui

: June 5, 2024
: Omidyi

Table of Contents

Omidyi

Omidyi

True Wireless Sleep Earbuds, Omidyi Noise Blocking Headphones

True-Wireless-Sleep-Earbuds-Omidyi-Noise-Blocking-Headphones-
imgg

Specifications

Package Dimensions
5.67 x 4.09 x 1.85 inches
Item Weight
1.6 ounces
Batteries
1 Lithium Polymer batteries
Ear Placement
In Ear
Connectivity Technology
Wireless
Brand
Omidyi

Introduction

Adopt cutting-edge Bluetooth 5.0 technology, are ergonomically constructed for sleep, have an effective noise reduction of 24 dB, and can instantly pair with a mobile device so you can listen your favourite music, podcast, or audiobook to promote restful sleep. You can wear the Omidyi L29 sleep earphones comfortably throughout the night thanks to their true wireless design and soft silicone eartips and earbud caps. Even if you sleep on your side, they will remain in place for the entire night no matter how much you toss and turn in bed. These tiny earbuds are ergonomically built, snugly fit in the ear, create the ideal acoustic seal, and efficiently block outside sounds up to 24 dB. Sleep Technology Has Been Shown to Hasten Sleep In Clinical Studies. The Omidyi L29’s innovative ear tips are composed of soft silicone, and because to their precise fit in the human ear canal, they can be worn comfortably and won’t fall out while you’re tossing and turning at night.

What’s In the Box?

1x Wireless Sleep Earbuds
1x Charging Case
3x L/M/S Eartips
3x L/M/S Earbud Caps
1x USB Charging Cable
1x Quick Start Guide

Immediately paired

Simply remove the earphones from the charging case for memory pairing after initially pairing with the smartphone using the instructions in the manual. Additionally, switching between using just one ear and both ears is simple.

Touch-Simple Control

With just a delicate touch, you may operate every feature of the earphones without experiencing any pain. Its intelligent touch sensors allow for volume control, music switching, playback pause, and call answering.

Warm recommendation

Please remove the yellow tape before charging and using it.
After charging the earphones, position them appropriately and line up the charging contacts.
If the earphones are difficult to wear, please decide whether to replace them based on your individual needs. We provide ear caps and tips in three distinct sizes.

How to use？

Answer/End A Call
(Short press either earbud)
Previous Track
(Four-tap left earbud)
Volume Up
(Triple tap right earbud)
Play Music
(Double-tap either earbud)
Reject A Call
(Long press either earbud)
Next Track
(Four-tap right earbud)
Volume Down
(Triple tap left earbud)
Pause Music
(Double-tap either earbud)

How to pair a Bluetooth headset?

BLUETOOTH CONNECTIONS TO MAKE

When not in use, turn off Bluetooth.
The “on/off” button repeatedly until the red/blue light flashes.
Activate Bluetooth on your phone, look for the “BT-FAAH” device, and then connect.
After making a Bluetooth connection, you can listen to music.

Frequently Asked Questions

Can you wear these in a sauna?
No, The earbuds are sweat-proof. However, the temperature of the sauna is high and the air humidity is high. For your safety, it is not recommended to bring headphones into it.
How long does the battery last on a typical night’s sleep?
This headset supports up to 200 hours of standby time and the playtime lasts up to 4.5 hours for a single charge, the charging case provides an additional 27 hours of play.
Do I just turn on my white noise app from my phone and play it through the earbuds for a quiet night of sleep?
I would imagine it should work just fine in that use case. I have several different apps I use for sound when I’m sleeping with these, some white noise, some deep sleep bandwidth, and some just instrumental music. I rotate through these according to my mood and all apps play through the buds.
How much playing time do you get on a single charge?
You can play music for about 4.5 hours on a single charge and sleep comfortably all night. With the included charging case, playback time is about 27 hours.
How do you tell when the battery in your true wireless earbuds is full?
The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged. NOTE: In order to prevent the problem of losing the earbuds’ “auto power on and off” features, it is crucial to keep the case charged at all times.
My true wireless earphones won’t connect, why?
If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have some battery left, try plugging them in and giving them a thorough charge before pairing.
How can I simultaneously connect both earbuds?
Turn off your Bluetooth and remove the earphones from their case to sync them. Press the buttons on top of the headphones twice quickly at once, and they should begin to pulse/breathe blue and begin blinking (looking for a device) In your Bluetooth options, choose Jam Ultra. I hope this was helpful.
How can I turn my earbuds’ volume up?
Go to Settings on your Android device and choose the sound option. The different sound settings will be visible. To change the media setting, click on it and make the necessary adjustments. You can do this while listening to music because it will direct you to the right settings.
How do I increase the volume of my earbuds?
On your Android device, navigate to settings and select the sound tab. There will be a display of the various sound settings. Click on it and make the necessary changes to the media configuration. Because it will guide you to the proper settings, you may accomplish this while listening to music.
Why are my wireless earbuds glowing continuously?
Bluetooth-enabled headphones have status lights that let you know what’s happening. Your headphones are properly connected to the media player if the indicator is flashing blue. You have connectivity and pairing problems if your headphones are glowing red and blue.