Electrolux MOTION EDBT800 Travel Iron Instruction Manual

June 3, 2024
Electrolux

Electrolux MOTION EDBT800 Travel Iron

Electrolux-MOTION-EDBT8000-Travel Iron-product-img

WE™RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.

Visit our website to:

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information General information and tips Enviromental information
Subject to change without notice.

Components

Electrolux-MOTION-EDBT800-Travel-Iron-fig-
\(1\)

  • A. Soleplate
  • B. Maximum water level indicator
  • C. Filling aperture with cover
  • D. Steam jet button
  • E. Steam selector
  • F. Power indicator light
  • G. Mains cable
  • H. Temperature selector
  • I. Water tank
  • J. Heel rest
  • K. Push button (for foldable handle)

Safety Information

Read the following instruction carefully before using machine for the first time

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

  • Children shall not play with the appliance.

  • Cleaning and user maintenance shall not be made by children without supervision.

  • Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.

  • The surfaces are liable to get hot during use .

  • The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!

  • The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or its cord or if it is leaking.

  • The appliance must only be connected to an earthed socket. If necessary an extension cable suitable for 10 A can be used.
    If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard.

  • The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

  • Never leave the appliance unattended while connected to the supply mains.

  • The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance.

  • The plug must be removed from the socket outlet before the water reservoir is filled with water.

  • The mains cable must not come into contact with any hot parts of the appliance.

  • Do not immerse the appliance in water or any other liquid.

  • Do not exceed the maximum filling volume as indicated on the appliances.

  • If there are limitations please define water quality / type of water that can be used with appliance.

  • This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

  • This product is appropriate for use with tap water. It is recommended to use destilled water or a mix of 50% destilled, 50% tap water.

  • The appliance can be used on either 120 or 240 volts. Before plugging in, please check carefully the voltage of the place where the appliance is being used.

  • Check if the dual voltage selector has been set to the local mains voltage before you connect the appliance. You can adjust the position of the dual voltage selector with a pen or a small stick. Always reset the selector to position 240 V after use. This prevents damage if you inadvertently connect the iron to the wrong voltage.

Ironing chart

Fabric Temperature setting Ironing recommendation
Acrylic Dry iron on wrong side.
Acetate Dry iron on wrong side while still damp or use spray to dampen.
Nylon & Polyester Iron on wrong side while still damp or use spray to

dampen.
Rayon| | Iron on wrong side of fabric.
Viscose| | Mainly dry iron. Steam can be used under manufacturer’s instructions.
Silk| | Iron on wrong side. Use an ironing cloth to prevent shine marks.
Cotton blends| | Check label and follow manufacturer’s instructions. Use setting fo the

fibre requiring lowest setting.

Wool & wool blends| | Steam iron on wrong side or use ironing cloth.
Cotton| | Dry iron while still damp or use spray to dampen. Use steam medium to high.
Corduroy| | Steam iron on wrong side or use ironing cloth.

Linen

|

to “max”

| Iron on wrong side or use ironing cloth to prevent shine marks, especially with dark colours. Dry iron while still damp or use spray to dampen. Use steam medium to high.
Denim| to “max”| Use maximum steam.
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table!

Voltage selector settings

Country Voltage Position
Japan 110 V 120
Taiwan 110 V 120
Colombia 110 V 120
Mexico 110 V 120
Brazil 110 V 120
Rest of the world 220 V 240

Getting started

  1. Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to remove foreign particles. When turned on for the first time, temporary vapours/odours may occur.
  2. Filling steam iron with water. Make sure plug is removed from power outlet. Turn steam selector to Dry setting and open filling aperture cover. Fill water up to maximum level. Close cover.
  3. Plug power cable into a power outlet. Power indicator light turns on. Set temperature by turning temperature selector to adequate choice. When the light turns off, iron is ready to be used.
  4. Using the steam function. Set temperature selector to or . Move the steam selector to
  5. Using the steam jet function. To use the steam jet function, ensure that tank is at least 1/2 full. Set temperature selector to . Press steam jet button several times to prime pump.
  6. Steaming hanging items. Vertical steam jet function is ideal for steaming curtains, suits and delicate fabrics. Hang item on a hanger, hold iron at a distance of 10–20 cm and press steam jet button.

Cleaning and care

  1. Always store iron on its heel rest. To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will damage the surface. Do not store the iron with water in the tank.
  2. Cleaning the soleplate. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate, simply wipe with soft damp cloth and wipe dry.

Troubleshooting

Problem Possible cause Solution
Soleplate is not heating even though iron is turned on. Connection problem

Check main power supply cable, plug and outlet.
Temperature control is in MIN position.| Select adequate temperature.
Iron does not produce steam.| Not enough water in tank.| Fill water tank (see “Getting started”, no 2).
Steam control is selected in non-steam position.| Set steam control between positions of minimum steam and maximum steam (see “Ironing chart”).
Selected temperature is lower than that specified to use with steam.| Increase temperature to at least                         .
Spray function does not work.| Not enough water in tank.| Fill water tank (see “Getting started”, no 2).
Steam jet and vertical steam jet function does not work.| Steam jet function was used very frequently

within a short period.

| Put iron on horizontal position and wait before using steam jet function.
Iron is not hot enough.| Adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off.

Disposal

  • Recycle the materials with the symbol Put the packaging in applicable containers to recycle it.
  • Help protect the environment and human health and to recycle waste of electrical and electronic appliances.
  • Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.electrolux.com
www.electrolux.com/shop
Electrolux Floor Care & Small Appliances AB St. Göransgatan 143 S-105 45 Stockholm Sweden
Share more of our thinking at www.electrolux.com
Printed on recycled paper
3485EEDBT80002010912

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals