schneider SCVC23400FB FLEX STICK VACUUM CLEANER Instruction Manual

schneider SCVC23400FB FLEX STICK VACUUM CLEANER

IMPORTANT SAFEGUARDS PLEASE READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE AND KEEP FOR FUTURE REFERENCE.

Safety instructions :

The battery must be disposed of safely.

• Do not use next to steps or on balconies. This machine does not have step avoidance sensors.

• This device can be used by children from the age of 8 and by people with reduced physical, sensory or mental capacities or a lack of experience and knowledge, provided that they have been placed under supervision or have received instructions on the safe use of the device and that they understand the dangers involved. Children should not play with
  the device. Cleaning and user maintenance shall not be carried out by children without supervision.

• This appliance is intended for household use only.

• This unit is suitable for low to medium backed mats. It is not suitable for uneven floors or mixed carpets.

• Remove the side brush when cleaning the underpad to protect the side brush.

• If the adapter power cord is damaged, the adapter must be discarded.

• Charge the battery(ies) only with the charger supplied by the manufacturer

• Use the device only with its battery(ies) specially created for this purpose. Use of any other battery(ies) may result in a fire or explosion hazard

• Please use an adapter to use this product only.

• Do not use on wet or greasy dust.

• Before use, keep fragile objects (glass, light, etc.) and other objects that may entangle the brushes (long hair, plastic bag, rope, iron wire, etc.) away.

• Do not sit on the machine or
  put heavy things on it.

• CAUTION: Make sure that the device can move freely in the room (that it is not blocked by an obstacle, that it cannot fall over) and that there are no obstacles on which the appliance could fall and create a risk of danger (such as a lighted candle or a vase filled with water).

• Clean the machine regularly.

• Empty the dust container.

• Charge the machine without using it for three months.

• Only charge it when low power alarm or power off. Use it after fully charged.

• The battery must be removed from the device before disposal; the device must be disconnected from the mains when removing the battery;

• Do not dispose of used batteries with household waste. Eliminate them in accordance with local regulations.

• Charge the battery/ robot only with the adapter supplied with the device.

• The external flexible cable of this adapter cannot be replaced; if the cord is damaged, the adapter should be discarded and replaced with an adapter of the same model.

• The device must be disconnected from the mains supply when removing the battery.

• This device contains batteries that cannot be replaced.

• CAUTION: To recharge the battery, use only the removable power supply unit supplied with the device.

Removable power unit

• WARNING: Entrapment Hazard. Hold loose clothing, hair, fingers, etc. away from motorized brushes and nozzles.
• WARNING: The plug must be removed from the outlet before cleaning or servicing the device.
• IMPORTANT
  • It is forbidden to replace the cable supply by yourself. In case of damage.
  • If the device has been dropped, please have a qualified person check it before using it again. Internal damage could lead to accidents.
  • For any type of problems or repairs, please contact the after-sales service of the local distributor, the manufacturer or a qualified person, in order to avoid any risk of danger.

Disposal and environmental responsibility
In order to be respectful of the environment, we encourage you to dispose of the device correctly. You can contact local authorities or recycling centers for more information.

Read the instruction manual carefully before first use.
This product complies with the applicable requirements of Directives 2014/35/EU (repealing Directive 73/23/EEC as amended by Directive 93/68/EEC) and 2014/30/EU (repealing Directive 89/336/EEC)

DEVICE DESCRIPTION

Product presentation

Engine block

Electric brush
Rotation for more flexibility, convenient use.

Contents packaging

The configuration described above is subject to change depending on the model, as we strive to always improve our products. We reserve the right to make these changes. The company reserves the right to announce these changes.

INSTRUCTIONS OF USE

Installation Instructions aluminum tube

• Push the end of the aluminum tube horizontally into the vacuum hole of the main housing making sure it is fully seated and firmly seated. The tube clicks audibly into place to confirm installation. (Figure 1)
• To remove the aluminum tube, hold the main body with one hand and pull it out with the other hand while pressing the button. (Figure 2)

Instructionselectric brush installation

• Push one end of the circular opening of the brush into the end of the air expulsion tube making sure it is fully seated and securely seated. The installation is complete (Figure 3).
• To remove the brush, hold it with one hand and press the button with the other hand while pulling the brush. (Figure 4)
• You can install the brush on the aluminum tube or directly on the main housing of the vacuum cleaner.

Assemble the charging stand:
Secure the parts with two screws, make sure the parts are firmly fixed and the screws are fully inserted. (Figure 5)

Accessories
Instructions use of accessories
In addition to using the aluminum tube and the electro brush, you can use a 2-in-1 brush and the crevice tool to adapt the product to all situations (Figure. 7):

• The 2 in 1 brush Suitable for cleaning small parts, nooks and irregularly shaped objects such as wall corners, metal window frames, interior of household appliances, drawers, car cushions, photo frames, ceilings, keyboards, etc.

• The long nozzle Suitable for cleaning hard-to-reach areas such as corners, crevices, etc.

• – You can insert the accessories in 2 different ways:

  • directly at the end of the flexible tube (Mode 1) or at the end of the engine block (Mode 2)
  • Mode 1: Take the long nozzle accessory, insert it at the end of the aluminum tube until you hear a click which confirms the installation. To remove it, pull directly on it.
  • Take the 2-in-1 brush accessory and do the same manipulation: insert it into the end of the aluminum tube until you hear a click confirming the installation.
  • To remove it, pull directly on it. (Figures 8)
  • Mode 2: To insert the accessories directly into the engine block, repeat the manipulation (Figure 9 and 10).

Instructions battery installation
Place the battery into the device in the direction shown (Figure 11) then install it as described (Figure 12) to ensure it is securely in place, you will hear a click confirming installation.

WARNING:
To ensure long battery life, store it in a cool, dry place and keep it charged. Wrap the battery in a non-conductive material to prevent it from coming into contact with other objects that could damage it.

Usage

1. Preparations
   Before use, install the battery in the vacuum cleaner and make sure it is charged. If not, charge it as soon as possible (see “charging the product”) before using it. Select the accessories suitable for the surface you want to clean.The device comes with different accessories suitable for different situations. You can select which accessories to use depending on the surface you want to clean. (see “Instructions for Use” section for more details)

2. Start cleaning
   Press the “power button” and then touch the button to activate the device. To stop it, release the “power button” Figure 13.

3. Empty the dust from the product
   After switching off the machine, press the button on the side of the dust container (Figure 14) to open the dust container and empty the dust it contains. Then close the dust container. (Figure 15)

4. Disassemble the entire dust container
   Turn and remove the dust container, you have access to the stainless steel filter, turn it to remove it. Reverse the procedure to put the stainless steel filter and the dust container back in place. (Figure 16)

Remove the motor filter in the direction indicated by the arrow. (Figure 17)

5. Load product
   Connect the charger directly to the vacuum cleaner or charging station (Figure

18. and the other end to a wall outlet in your home. (Figure 19)

Charge Indicator Description

• In operation: the indicator is lit continuously.
• Partially charged: the light flashes
• Fully Charged: The light is on continuously.
• Remark :
  • After making the product, every three months (depending on the conditions of use), please use the special charger to charge the battery for 3 hours (it does not need to be fully charged).
  • Do not charge the battery for too long. If the charger is left plugged in for a long time after fully charged, stop immediately as there is a risk of battery overheating, deformation and fire.
  • If the battery has not been used for an extended period of time, or has been severely discharged, its capacity may be reduced during the first few uses. It is recommended to fully discharge the battery after charging (usually more than 6 hours). You only need to repeat this action twice.

CLEANING AND MAINTENANCE

To maintain the performance of the device, it is recommended that you perform maintenance on its components on a regular basis.
Before cleaning the main housing, (motor unit) (the hand-held section), make sure the device is turned off and not charging.
Wipe it with water or neutral detergent. Before you start wiping, make sure the cloth is dry. Do not allow water to enter the vacuum cleaner (Figure 20) After cleaning, do not place under direct sunlight or in a damp place.

Cleaning the dust bin

• When the amount of dust reaches the “MAX” mark, clean the dust bin as soon as possible to prevent it from overfilling.
  To simplify the procedure for emptying the dust container, it is recommended that you remove the aluminum tube or other
  accessories before cleaning.

• After turning off the device, open the dust bin and throw away the dust. If stubborn dust remains on the sides of the dust bin, carefully wipe it off with a damp cloth.

• After cleaning, close the dust container and make sure the lock button is in place.

• Remark :
  After wiping the inner wall of the dust bin with a damp cloth, lay it in the sun and then reinstall it after it is completely dry.

• Cleaning the air outlet filter
  To ensure the performance of the product, it is recommended to clean it regularly and replace it every 3 to 6 months. (depending on the frequency of use), press and hold the dust bin release button and turn the cover over, remove the sponge and clean the dust it contains. (see Fig. 17)
  If too much dust has accumulated, wash the sponge filter thoroughly and dry it before installing it in the main housing.

• Remarks !
  To clean the sponge filter, use cold water then allow to dry completely (usually 24 hours in the sun), then reinstall it in the case.
  Clean the brush
  We recommend that you clean the brush once after 4-5 uses of the electric brush:

  • Switch off the power supply and remove the electrobrush.
  • Flip the brush over and twist the lock button with a coin to open the lock. (Figure 21)
  • Remove the rotating brush to fix the lid, lift one endof the rotating brush to remove it. (Figure 22)
  • Use a pair of scissors or other sharp instrument to remove tangled hair, pet hair and other debris (Figure 23).
  • When cleaning is complete, reposition the roller brush in the housing and then snap the other end into the floor brush. (Figure 24)
  • Replace the cover and lock it.

• Organization and storage
  Storage on the charging station: easy access to the vacuum cleaner and saving space. (Figure 25) Storage of accessories: easy access and easy to store. (Figure 26)

• REMARK:
  Always store the vacuum cleaner on a flat floor, if the vacuum cleaner is stored on an inclined surface, it may fall and be damaged.
  If storing for a long time, please charge the battery periodically to preserve battery life.

TROUBLESHOOTING

Identifying and Handling Common Errors

is correct.
The opening of the vacuum cleaner is clogged.| Clean the suction opening of the vacuum cleaner.
The power suction of the product decreases.| Dust bin and filters are overloaded with dust.| Clean the dust bin and filters.
The roller brush is tangled in hair, etc.| Clean the roller brush.
The problem is not solved after applying these solutions.| Please contact our after-sales service for servicing.
The motor operates with an abnormal noise.| The main suction pipe or the aluminum pipe is blocked.| Clean clogs in suction tube or aluminum tube.
The problem is not solved after applying these solutions.| Please contact our after-sales service to have an interview carried out.
The product does notnot charging.| The main computer and the charger plug are not well connected.| Please check the connection and make it correctly.
The problem is not solved after applying these solutions.| Please contact our after-sales service for servicing.

If the product still does not work properly after performing the above steps, contact our after-sales department for assistance.

SPECIFICATIONS TECHNIQUES

35 (Low power)

Product dimensions (mm)| 369mm x 125mm x 227mm
Net weight (kg)| 5.53kg

Disposal:

The presence of this logo on the product means that the disposal of the device is framed by the directive 2012/19/EU dated July 4, 2012 relating to waste electrical and electronic equipment (WEEE). Any hazardous substance contained in electrical or electronic equipment can have a potential impact on the environment and health during its recycling. Consequently, at the end of the appliance’s useful life, it must not be thrown away with unsorted municipal waste. Your role as the end consumer is essential in terms of reusing, recycling and obtaining other types of value creation from this product. You have the choice of different collection and exchange systems organized by local authorities (recycling centres) and distributors. It is your duty to make use of these possibilities.

At end of battery life :

This device contains non-replaceable batteries. Used batteries must be taken care of by a system of selective collection in order to be recycled and thus reduce the impact on the environment. When the battery reaches the end of its useful life, you must deposit it in an appropriate selective collection system which will take care of its destruction and/or recycling.

• If battery acid has leaked, avoid contact with skin, eyes and mucous membranes! Fluid leaking from the battery can cause skin rashes.
• If acid should nevertheless come into contact with the skin, rinse the affected areas immediately with plenty of clean water and consult a doctor without delay.
  • Batteries must be installed in accordance with+/- polarity.
  • Do not recharge non-rechargeable batteries due to the risk of explosion.
• IMPORTANT:
  Under no circumstances should you throw the device or the battery on the public highway.

The warranty does not cover wear parts of the product, or problems or damage resulting from:

1. Superficial damage due tonormal wear and tear of the product;
2. Defects or deterioration due to contact of the product with liquids and due to corrosion caused by rust or the presence of insects;
3. Any incident, abuse, misuse, unauthorized modification, disassembly or repair;
4. Any improper maintenance operation, use not in accordance with the product instructions or connection to an incorrect voltage;
5. Any use of accessoriesnot supplied or approved by the manufacturer.
   The warranty will be void if the nameplate and/or serial number of the product is removed.

Data sheet of the external power sources of the directive European (EU) 2019/1782

Ltd.
Input voltage| 100-240| V
Input AC Frequency| 50/60| Hz
Output voltage| 30| V
Output current| 0.5| AT
Output power| 15| W
Average performance in active mode| >86.8| %
Efficiency at low load (10%)| >72| %
Off-load power consumption| <0.1| W

Imported by: SCHNEIDER CONSUMER GROUP 12, rue Jules Ferry, 93110 Rosny- sous-Bois, FRANCE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>