AYVVPII

AYVVPII 10pcs Bundle Wireless Silent Disco LED Flashing Light Headphones

Specifications

• BRAND: AYVVPII
• EAR PLACEMENT: Over-Ear
• CONNECTIVITY TECHNOLOGY: RF, Wired
• FORM FACTOR: Over Ear
• RECEIVING DISTANCE: 150~200meters
• COMPATIBILITY: iPod, DJ, MP3 player
• AUTOMATIC SWITCH OFF: after 10 minutes
• HEADPHONE: FREQUENCIES: 915MHZ 3 channels
• SOUND SYSTEM: Stereo Mode
• DIMENSIONS: 15cm (19cm extended)
• POWER SOURCE: 600mAh 3.7V Lithium Battery
• CHARGE TIME: About 3Hours
• BATTERY LIFE: 8~10hours
• WEIGHT: 210G
• TRANSMITTER: FREQUENCIES: 915MHZ 3 channels
• DIMENSIONS: 6.9cm(W) x 2.4cm(H) x 7.8cm(D)
• VOLTAGE: 9V DC/3.7V Lithium
• CHARGE TIME: About 3-3.5Hours
• ANTENNA GAIN: 5 dBi
• EFFECTIVE DISTANCE IN VAST PLACE: Up to 500 meters

Introduction

Dancers may enjoy it anywhere within the range because of the headphone’s 150–200 meter receiving range and the transmitter’s 500 meter range, which means there is no noise pollution in the surrounding area. Our LED headphones’ pulsing lights, which flash in time with the music to flood your silent disco with color, are by far the most fashionable silent disco headphones available. Wireless headphones that are rechargeable and portable for silent events, meetings, classrooms, broadcasting, travel, and other uses. Connect to any device you choose to use (i.e., iPod, DJ, MP3 player etc.) 3 channels with switchable buttons. Everyone wears headphones to dance to the music, receiving signal through walls and ceilings because many headphones can work with one transmitter simultaneously. When no music is broadcast for ten minutes, all of our headphones turn themselves off automatically to conserve battery life and make event cleanup a snap.

WHAT’S IN THE BOX

• 10 x Headphones
• 1 x Antenna
• 1 x Transmitter
• 10 x USB Charging Cables
• 1 x RCA Audio Cable
• 1 x 3.5MM Audio Cable
• 1 x Adapter
• 1 x Electronic User Manual (ask us to send)

HOW TO DISABLE THE FLASHING RED INDICATOR LIGHT

Put the headphones in pairing mode (i.e., red and blue flashing) and then push the volume down button to turn off the LED indicator light. Put the headphones off after doing this, then turn them back on and connect them to your device as usual.

HOW TO TURN ON THE LED ON THE HEADSET

On the side of your headset, there should be a controller with volume control. Additionally, the mute button and the control for LED effects are often found here. Once you discover the button position, hold down the volume button for a few seconds. The LED lighting effects activate once it starts flashing.

HOW TO RESET

Click Reset now under Factory reset, and then select Reset now once more to confirm. Using an Android or iOS device: Tap Account > Surface Headphones > Device information after launching the Surface app. Then, to confirm, choose Reset your Surface Headphones > Reset immediately.

HOW TO PAIR

Use the provided cords to connect each radio transmitter to any audio device in order to use the quiet disco equipment. By connecting each of the three transmitters to any three different audio players of your choice, you can play three channels or music playlists at once.

Frequently Asked Questions

• How can I stop the blue flickering on my Bluetooth headphones?
  A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses.

• How can I turn the Bluetooth headphones’ light off?
  Locate the Bluetooth menu on your smart device by going to “Settings” Look for the headphones you are currently using in this menu. Once located, tap on it to bring up a popup with a number of options, including a battery level meter and other things. Locate and select the “Flashing Light” option next.

• Why do my wireless headphones have red and blue blinking lights?
  The headphones are prepared for Bluetooth connection while the LED is blinking red and blue. The light will begin steadily flashing solely blue when they join. You depress the middle button until the light turns red to turn them off. The headphones will turn off when you release your grip on the button.

• Why won’t my Bluetooth headphones pair?
  Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

• Why won’t my wireless earbuds switch on?
  If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things. Important: Consult the product’s instructions if you require model-specific details to accomplish any of the tasks.

• How do I activate my Bluetooth earbuds?
  Toggle the listed headphones. Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it, and then start looking for devices. To link a pair of headphones, tap their name.

• Do Bluetooth headphones have an automatic off function?
  Furthermore, Bluetooth headphones are inefficient energy users. So as to help with energy conservation, they will switch themselves off when not in use. The device might also shut off on its own when the battery runs out. When not in use, the Bluetooth headphones are set to shut off.

• How long do wireless headphones take to recharge?
  The earphones need about two hours to fully recharge. If the battery is low, you can extend its life by 10 to 20 minutes by charging it in the charging case. Connect the charging case to an approved wall charger or USB power source.

• Exactly why aren’t my headphones charging?
  Check your headphones’ charging port for any damage, such as bent metal or connectors. Additionally, check to see if the port feels tight when you touch it, as this can indicate that the connectors have come loose from the headset.

• How can I tell how much battery life my headphones have left?
  The rechargeable battery’s remaining charge can be checked. The indicator (blue) flashes twice after pressing the button to switch on the headset, followed by the indication (red). By counting the number of times, the indicator (red) flashes, you may determine how much battery power is still left.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>