Honeywell Home TF428 RSBS Series Digital Thermostat User Manual

June 7, 2024
Honeywell Home

Honeywell TF428 RSBS Series Digital Thermostat User Manual

Thermostat Appearance

Thermostat Appearance

Operating Your Thermostat

Power On/Off
Time-off

  • Press to switch on/off thermostat. When in off mode, OFF icon and indoor temperature will display.
  • Press  could set the automatical turn off time when the thermostat is working.
    Press and hold for more than 3s. After timer icon flashes, press or to set turn off time, then press ?? button to exit.

Temperature Setting

In or or mode, press or to set the target room temperature.

Operating Mode

Operating Mode Figure 1

Fan SpeedFan Speed

Fan Speed Figure 1

LCD Display

LCD Display

Trouble Shooting Tips

Trouble Shooting Tips

Installation Guide

Must be Installed by a trained and experienced Installer

  • Read instruction carefully. Failure to follow instruction will damage the product or cause a hazardous condition.
  • Check the ratings in this booklet to verify that this product is suitable for your application.
  • Always test for proper operation after installation.

Caution: ELECTRICAL HAZARD can cause electrical shock or equipment damage. Disconnect power before Installation, reparation and detachment.

The manual interpretation is owned by Resideo Technologies, Inc. and its affiliates, we retain the rights that improve the products described in this manual without prior notice.

Installation Tips

TF428 Series is designed for standard 75x75x50mm wall mounting box installation. Install the thermostat about 5 feet (1.5m) above the floor in an area with good air circulation at average temperature.

Installation Tips

Do not install in locations where the thermostat can be affected by:

  • Dead spots behind doors and in comers
  • Hot or cold air from ducts
  • Sunlight or radiant heat from appliances
  • Concealed pipes or chimneys

Wiring and Installation

The screw must be locked tightly to avoid wire break off from the terminal.

Wiring and Installation

Terminal Designations

Terminal Designations

  • The temperature of mounting box and wall should be in the operating temperature range.

Two pipe application

Two pipe application

Four pipe application

Four pipe application

Installation Setup

Installation Setup Table 1

Installation Setup Table 2

Installation Setup Table 3

resideo

www.resideo.com

PittwaySarl, Z.A. La Piece 4,
1180 Rolle,Switzerland

Country of origin: China

©2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International Inc.
This product is manufactured by Resideo Technologies, Inc. and its affiliates.

R32347277-001
Subject to Change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Honeywell Home User Manuals

Related Manuals