DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand User Manual

June 5, 2024
DEVAISE

DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand

DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand

GENERAL GUIDELINES

  • Please read the following instruction carefully and use the product accordingly.
  • Please keep this manual and hand it over when you transfer the product.
  • This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed..

NOTES

  • Please follow the assembly instructions precisely and only use the product as intended.
  • If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
  • Prior to assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use product as damage or injury may OcCur
  • Please contact us for assistance and replacement.
  • During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
  • It is suggested you regularly check the products bolts and connections to ensure safe use.
  • Assemble the item on a soft flat and clean surface to avoid scratches and damage
  • It is recommended that two people assemble this product.

WARNINGS

  • During assembly, keep parts and packaging materials away from children and pets as there could cause injury and are a potential choking hazard.
  • Avoid sharp objects or corrosive chemicals to prevent damage to the product.
  • Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially children.DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand 1

EXPLODED DRAWING

DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
2

PARTS

DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand 3

IMPORTANT INSTRUCTIONDEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
4

  • Please do not fully tighten screws until all screws are in place.
  •  During installation, please note that the position of the shaded part blank of parts 5 and 6, the hole position indicated in parts 4 and 7 are on the same side
  •  Please do not fully tighten screws until all screws are in place.

DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand 5DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
6 DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
7 DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
8 DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
9 DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
10 DEVAISE ADYJ004 Fabric 1 Drawer Printer Stand
11

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals