DEVAISE AHDG042 Fabric 3 Drawer File Cabinet with Shelf User Manual
- June 5, 2024
- DEVAISE
Table of Contents
AHDG042
V3.5
Fabric 3 Drawer File Cabinet with Shelf
IMPORTANT INFORMATION IS READ CAREFULLY.
KEEP THIS INFORMATION FOR FURTHER REFERENCE.
GENERAL GUIDELINES
- Please read the following instruction carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product.
- This summary may not include every detail of all variations and considered steps.
- Please contact us when further information and help are needed.
NOTES
- Please follow the assembly instructions precisely and only use the product as intended.
- If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
- Prior to assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use the product as damage or injury may occur; Please contact us for assistance and replacement.
- During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
- It is suggested you regularly check the product’s bolts and connections to ensure safe use.
- Assemble the item on a soft flat and clean surface to avoid scratches and damage.
- It is recommended that two people assemble this product.
WARNINGS
- During assembly, keep parts and packaging materials away from children and pets as there could cause injury and are a potential choking hazard.
- Avoid sharp objects or corrosive chemicals to prevent damage to the product.
- Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially children.
|
- If you have any further questions, please feel free to contact us by email or official website: devaise-cs@devaise.com We will reply ASAP.
- Before installation, please make sure you have all the hardware, the serial numbers are properly labeled corresponding to the list, and the quantity is correct.
- Enjoy your new purchase!
---|---
EXPLODED DRAWING
PARTS
REMARK
- Put a blanket under the board to avoid scratches or damage.
- Make sure the holes on Part 2 and Part 3 at the same side.
- Please do not fully tighten screws until all screws are in place.
REMARK
Please do not fully tighten screws until all screws are in place.
Please do not fully tighten screws until all screws are in place.
- Make sure the holes on Part 7 and Part 2 & Part 3 are on the same side.
- Please do not fully tighten screws until all screws are in place.
Please do not fully tighten screws at this step.
Please fully tighten all the screws after they are in right place， including those in Step 6.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>