MeTra 95-7399B Power Sports Hyundai Elantra Instruction Manual

June 4, 2024
Metra

MeTra logo 95-7399B
INSTALLATION INSTRUCTIONS
MeTra 95 7399B Power Sports Hyundai
Elantra

Hyundai Elantra 2019-2020
Visit MetraOnline.com for more detailed information about the product and up- to-date vehicle-specific applications

KIT FEATURES

  • ISO DDIN radio provision
  • Painted scratch-resistant matte black

KIT COMPONENTS

  • A) Radio trim panel
  • B) Radio brackets
  • C) Blank panel
  • D) Blank panel clip legs (2)
  • E) #6 x 3/8” Phillips screws (2)
  • F) #8 x 1/4” Phillips screws (4)
  • G) Panel clips (2)

MeTra 95 7399B Power Sports Hyundai Elantra - fig

WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 (w/o 7-inch display radio)

  • 70-7306 (with 7-inch display radio)
    Antenna Adapter: N/A (w/o 7-inch display radio)

  • 40-KI11 (with 7-inch display radio)
    Please visit metraonline.com or Axxess interfaces. com for other harness and interface options.

TOOLS REQUIRED

  • Panel removal tool
  • Phillips screwdriver
  • Socket wrench

Attention! With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.

DASH DISASSEMBLY

  1. Open the passenger front door, then unclip and remove the trim panel from the side of the dashboard. Remove the (1) Phillips screw securing the silver trim panel. (Figure A)
  2. Unclip and remove the silver trim panel that runs along the dashboard from under the radio, and above the glovebox. (Figure B)
  3. Open the driver’s door, then unclip and remove the trim panel from the side of the dashboard. Remove the (1) Phillips screw securing the silver trim panel. (Figure C)
  4. Unclip and remove the silver trim panel from under the driver’s side A/C vent. (Figure D)
  5. Unclip the trim panel above the steering column, and then unclip and remove the entire panel surrounding the instrument cluster. Note, these two panels are one assembly. (Figure E)
  6. Remove the (2) Phillips screws securing the radio trim panel, then unclip and remove the panel. (Figure F)
  7. Remove the (4) Phillips screws securing the radio and then remove.
    Continue to Kit Assembly

KIT ASSEMBLY

  1. Attach the radio brackets to the radio trim panel using (4) #8 x 1/4” Phillips screws supplied. (Figure A)
  2. Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Figure B)
  3. Attach the blank panel clip legs to the blank panel using (2) #6 X 3/8” Phillips screws supplied. (Figure C)
  4. Attach the panel clips to the panel legs.(Figure D)
  5. Snap the blank panel into the factory trim panel. (Figure E)
  6. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
  7. Reassemble the dash in reverse order of disassembly.

http://www.metraonline.com

Having difficulties? We’re here to help.
**** Contact our Tech Support line at: 386-257-1187
Or via email at: [email protected]

Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM

KNOWLEDGE IS POWER
enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.edu or call
386-672-5771 for more information and take steps toward a better tomorrow.

MeTra 95 7399B Power Sports Hyundai Elantra - fig 12 Metra recommends MECP-certified technicians

MeTra 95 7399B Power Sports Hyundai Elantra - fig 13

Hyundai Elantra 2019-2020
Visit MetraOnline.com for more detailed information about the product and up- to-date vehicle-specific applications.

ISO DDIN radio provision
Painted scratch-resistant matte black

MeTra 95 7399B Power Sports Hyundai Elantra - fig 14

KIT COMPONENTS

  • Radio trim panel
  • Radio brackets
  • Blank panel
  • Blank panel clip legs (2)
  • 6 x 3/8” Phillips screws (2)

  • 8 x 1/4” Phillips screws (4)

  • Panel clips (2)

MeTra 95 7399B Power Sports Hyundai Elantra - fig 15

WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7304 (w/o 7-inch display radio)

  • 70-7306 (with 7-inch display radio)
  • Antenna Adapter: N/A (w/o 7-inch display radio)
  • 40-KI11 (with 7-inch display radio)

Please visit metraonline.com or axxessinterfaces.com for other harness and interface options.

MetraOnline.com
Metra. The World’s best kits.®
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
REV. 7/9/21

Documents / Resources

| MeTra 95-7399B Power Sports Hyundai Elantra [pdf] Instruction Manual
95-7399B, Power Sports Hyundai Elantra, Sports Hyundai Elantra, Hyundai Elantra, 95-7399B, Elantra
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Metra User Manuals

Related Manuals