CONAIR HP44 heated wrap Instructions
- June 5, 2024
- ConAir
Table of Contents
IMPORTANT SAFETY
INSTRUCTIONS
DO NOT DESTROY
DANGER – When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons. Misuse or failure to follow these warnings and instructions may cause overheating, fire, personal injury and/or property damage:
-
Be sure to read all instructions carefully, before using this heating product.
-
Do not use this heating product with an infant, child, or incapacitated or immobile person, paraplegic, or quadriplegic, a diabetic, anyone insensitive to heat, such as a person with poor blood circulation, or anyone who cannot clearly understand instructions and/or operate the controls.
-
Do not tuck in, pinch, flex, or expose the wired heating area of this heating product.
-
Do not route electrical cords between the mattress and box spring. Do not allow the cords to be pinched. Do not use damaged cords. Damaged cords can lead to overheating or fire.
-
Keep the control away from drafty areas that may become damp or wet, such as open windows.
-
Do not use pins or other metallic means – they may damage the electrical wiring.
-
Do not use if wet. If a spill occurs, turn the heating product off, unplug, and dry before reusing.
-
The controller is not waterproof. Do not immerse in water or other liquids.
-
Be sure that this heating product is used only on an AC supply circuit of the proper voltage. Do not use an extension cord. Do not use generators, power converters or inverters.
-
Turn off or unplug this heating product when not in use.
-
Excessive heating may result from folding or bunching this heating product while in use.
-
Examine the heating product, cord, and controller before each use for signs of wear or damage. If improper operations, wear or damage is observed, discontinue use immediately and consult the manufacturer or the dealer regarding its repair.
-
Do not use rocking chairs, recliners, chairs with casters or wheels, or other furniture subject to movement.
-
Do not use this heating product on a waterbed, bunk bed, mechanically adjustable bed or a
child’s crib/bed. -
Do not use in conjunction with another electrically heated product.
-
Do not tuck the heated wrap or supply cord or control in a sofa or other furniture. All portions of this heating product should be visible at all times.
-
Wrapping of cord around the controller may damage the cord. Loop loosely when storing. Allow cooling before storing and do not crease by placing items on top of it. Store in the original packaging, in a cool, dark, dry place.
-
Do not dry-clean this heating product. Cleaning solvents may damage the insulation of the heating element. Improper laundering may cause problems with the heating wire, which can lead to a fire.
-
Keep all dogs, cats, and other pets away from this heating product. This is an electrical appliance that they can damage or be injured by.
-
If provided with a detachable controller, use only with the provided controller.
-
Do not use this heating product with analgesic creams, liniments, salves, or ointment preparations. Skin burns could result.
-
Check with your healthcare provider before using a pacemaker or any medical device.
-
Not for hotels, motels, hospitals, or other institutional use.
-
Do not use the wrap when symptoms of appendicitis are present. Consult your physician.
-
Do not use wrap while consuming alcohol.
WARNING – The Conair®
Heated Wrap is an electrical device.
To avoid electric shock:
- Do not wash the unit with water. See washing instructions.
- Do not touch the plug or device with wet hands.
- Do not touch the unit to wet skin.
- Do not use if the cord or plug appears to be damaged.
- Do not use the unit if it has been damaged, torn, or has come in contact with water.
- Do not pull, lift, or carry the unit by the power cord.
- Do not operate the unit in areas where flammable or combustible products or vapors may be present. An explosion or fire may occur.
- Do not allow children to use it – this is not a toy. Do not leave small children unattended close to the unit.
- Not to be used by disabled, sleeping, or unconscious persons.
- Do not use liniments, salves, or ointments that contain heat-producing ingredients, as a skin burn could result.
HEATED WRAP FEATURES
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
USING THE HEATED WRAP
Remove the contents from the box. Attach the AC power cable to the power jack
on the blanket. Plug the cable into a 110-120V AC wall outlet. Press the
(POWER) button on the controller to turn the heat on Low. The LED indicator
will display the current heat level. Continue to press the (POWER) button to
increase the heat level up to Medium and High. Press the (POWER) button again
back to the Low setting. To turn off, press and hold the ON/OFF button until
all lights turn off.
NOTE: The heat will automatically turn off after 2 hours; the green LED
indicator light will keep flashing.
For the product to function properly, once the heat wrap has been disconnected
from the controller, but the power cord remains connected to the electrical
outlet, you must remove the plug from the electrical outlet before you
reconnect the heat wrap to the controller, and then plug the power cord back
into the electrical outlet in order to resume use. If you do not unplug the
power outlet, the red LED indicator light will flash and the heated wrap will
not work properly.
WASHING INSTRUCTIONS
NEVER dry-clean or use bleach. Disconnect ALL CORDS before washing. NEVER
submerge cords or control unit. Place textile portion without cords in the
washing machine.
HAND-WASHING (Recommended)
Washing this item by hand will result in a much longer product life than using
a machine. Disconnect all cord(s) and wash the textile separately by hand in
lukewarm (100 °F) water, using a small amount of mild laundry detergent. Soak
for 5 minutes, then gently work the textile up and down for more than 5
minutes. NEVER rub or scrub the textile. Rinse thoroughly in cool water until
all traces of detergent are gone. Squeeze excess water out by hand, NEVER
twist. DO NOT use a wringer.
MACHINE WASHING INSTRUCTIONS
Wash as follows in the automatic washer using slow agitation and normal spin
speed: Fill the washer with warm water. Add minimum amount of all-purpose
detergent, agitate to
dissolve, and measure heating pad before washing. Add heating pad and soak for
5 minutes. Agitate to dissolve, and measure the heating pad before washing.
Agitate for 2 minutes. Spin. Fill for cool rinse, agitate for 1 minute, then
spin.
LIMITED THREE-YEAR WARRANTY (U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 36
months from the date of purchase if the appliance is defective in workmanship
or materials. To obtain service under this warranty, return the defective
product to the service center listed, together with your purchase receipt.
California residents need only provide proof of purchase and should call
1-800-3-CONAIR for shipping instructions. In the absence of a purchase
receipt, the warranty period shall be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF THIS
WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of
special, incidental, or consequential damages, so the above limitation may not
apply to you. This warranty gives you specific legal rights, and you may also
have other rights, which vary from state to state.
DRYING INSTRUCTIONS
NEVER use commercial dryers at the laundromat, as they may be extra hot and
could damage the wiring of the product. DO NOT iron. DO NOT plug in until
completely dry.
To machine dry, place in the automatic dryer on high heat for only 5 minutes,
then line dry (recommended). To completely dry, place an item into a dryer on
low heat and allow to tumble until dry. Ensure that the textile has enough
room to tumble freely. If the product draws during washing, gently stretch it
while it is still damp until it returns to its original size. DO NOT iron your
heated wrap. To line dry, simply drape the item over two parallel clotheslines
or a shower rod. DO NOT reconnect the item until it is completely dry. DO NOT
use the clothespins that can pinch wires.
STORAGE
Unplug and store this item as you would any other bedding or linen, folded and
in a dry place.
POLARIZED PLUGS
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way. If the plug fits loosely into
the AC outlet or if the AC outlet feels warm, do not use that outlet.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur n a particular installation. If this equipment does cause harmful
interference to radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SUPPLIER’S DECLARATION OF CONFORMITY
Model No.: HP44
Description: HEATED WRAP
Responsible Party: Conair Corporation, 1 Cummings Point Road, Stamford, CT
06902
1-800-334-4031
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesirable operation.
DATE OF ISSUE: 24 September 2019
heated wrap
Instruction Booklet for model HP44
For your safety and continued enjoyment of this product, always read the
instruction book carefully before using it.
Service Center
Conair Corporation
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
Visit us on the web at www.conair.com
©2020 Conair Corporation
20PA073070
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>