Clear Touch 8000MAX Series Innovative Panels Smart Blackboard for Education User Manual

Clear Touch 8000MAX Series Innovative Panels Smart Blackboard for

Education

Safety Warning

Before operating, please read this manual thoroughly, and keep it for future reference.
Image shown in this manual is indicative only. There may be differences between the pictures and the actual product, please prevail in kind.

Placement

• Do not put heavy objects on top of the unit.
• Do not put the unit near appliances that generate magnetic fields.
• Do not expose the unit to direct sunlight and other sources of heat.
• Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
• Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.

Power Supply

• Please keep power cable from physical or mechanical damage.
• Please check and ensure AC source is connected with the ground.
• This power cable comes with the device exclusively for this device only.
• Please unplug power supply when the weather is thunder-storm or lightning.
• Check that the unit’s operating voltage is identical with your local power supply.
• Please use the original power cable from the accessory bag, don’t modify or lengthen it.
• Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.

LED Screen
Unplug the power cable before cleaning. Clean the screen with a soft, dustless and dry cloth. For deep clean, please contact an authorized service center. Never use water or the spray type detergent to clean the unit. Never use any other hard or sharp object to replace the touch pen.
Better for the panel lifetime and the display performance, do not display high brightness image for long time.

Temperature
Normal operating temperature is 0 ~ 40℃. Do not place the unit near or over a radiator or a heater. If your unit is suddenly moved from a cold to a warm place, please unplug the power cable and do not turn it on at least 2 hours, making sure the moisture inside the unit is all evaporated.

Humidity
Do not expose the unit in rain, or place in high humidity area. Please make sure indoor environment is dry and cool. Normal operating humidity is 10%~90%RH.

Ventilation
Please put the unit in a well-ventilated place, so the heating can be released easily. Ensure that the unit has enough space for ventilation. Space requirement: left, right and back >10cm, top> 20cm.

Earphone
Before using earphone, please turn down the volume in advance.Using the earphone to listen loud sound for a long time might affect the hearing.

Standby
It will enter standby mode but not turn off the unit after press the standby key.

Battery
Please make sure the battery gets proper disposal or recycle after using. Please keep the battery away from kids and don’t throw the battery into fire. Caution risk of fire or explosion if the battery is replaced by an incorrect type.

Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during cleaning.

Power Switch Status Signs
“I” means power on, “O” means power off.

Notes for Maintenance
This machine can only be maintained by certified engineer.

Control Panel

Prepare to Install

2

| Magnetic zone: Area for placing the absorptive

magnetic pen.

3| Loudspeaker

4

| : Tap to enter energy-saving, press at least

2 seconds to enter standby mode.

5

| Remote control signal receiver: Receive the

remote signal.

6

| Light Sensor: Identify the brightness of

ambient light.

7

| USB Type-C: Support charging, data transmission, extension for audio and video output interface, etc.

Note: The maximum rated power of the USB Type-C port of this product is 65W. When using this port to charge electronic devices, the charging power of the electronic device cannot exceed the rated power of this port. If the charging power of the electronic device exceeds the rated charging power of this port, please Do not directly use this port for

charging.

---|---
8| USB 3.0

Terminal Interface 

1

| HDMI

OUT*

| Connect to the devices with HDMI

input function.

2

|

3.0

| Connect USB devices such as mobile hard disk, U disk, USB keyboard and

mouse, USB drives, etc.

3

|

TOUCH

| Touch signal output to the external

computer.

4

|

HDMI IN

| High-definition multimedia interface signal input, connect to devices with HDMI output interface (personal computer with HDMI output, set-top

box, or another video device).

---|---|---

5

|

3.1

| USB Type-C: Support data transmission, extension for audio and

video output interface, etc.

6

|

SPDIF

| Carry multichannel sound via optical

signals.

7

|

2.0

| Connect USB devices such as mobile

hard disk, U disk, USB keyboard, mouse, USB drives, etc.

8| VGA| External computer image input.
9| AUDIO IN| External computer audio input.
---|---|---
10| LAN| Connect RJ45 terminals.

11

|

RS232

| Serial interface, used for mutual

transfer of data between devices.

12

| AUDIO

OUT

|

Audio output to the external speaker.

13

|

AC IN

| AC power input, connect AC power

supply.

14

|

AC SWITCH

| To open or shut down AC power supply.“I”means power on,“O”

means power off.

Remote Control

Remote Control Button Instruction

Detailed Function Description

NOTE: All computer – related function keys are not available without a built-in computer.

Remote Control Instruction

Install Batteries

1. Open back cover of battery component on the back of remote control.
2. Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole are correct (“+”to”+”, “-” to “-“), please do not mix using old and new batteries.
3. After battery is installed, close the back cover of battery components, and make the following clip buckled to the bottom.

Range of remote control
Remote control can work normally within the range of 3 meters distance, 10 degrees left and right from the remote-control receiver; in order to protect environment, please dispose waste battery into recycling box.

Connection and Setting

For the safety of you and the machine, please do not connect any power plug before connection.

External Computer and Touch Connection

Use USB Type-C cable To connect the computer(Or Use VGA cable to connect to VGA output port of external computer, and meanwhile use headphone audio cable to connect to external computer audio output interface. Or use HDMI cable to connect to HDMI , VGA OUT / HDMI OUT, Audio-OUT, USB Interface Support Resolution 800×600,1024×768,1920×1080, 3840×2160

Audio and Video Equipment

1. Use HDMI cable to connect audio and video equipment with HDMI output.
2. After cable connection, plug in power cord, and switch power on.
3. Press to turn equipment on.
4. Switch the input source to the HDMI channel in the main menu.

Audio and Video Equipment

1. Use HDMI cable to connect audio and video equipment with HDMI input.
2. After cable connection, plug in power cord, and switch power on.
3. Press to turn equipment on.

RS232 Connection

After using serial port cable to connect central control equipment and machine, certain function of the machine can be controlled via central control equipment, such as: machine ON/OFF, and adjustment of sound volume, etc.

LAN Connection

USB CONNECTION

AUDIO OUT CONNECTION

Simple Troubleshooting

Machine Fails to Work Normally

Remote control failure

| Check whether there are other objects between remote control and equipment control receiving window, thus leading to failure of remote

control.

---|---
Check whether the battery electrode

in the remote control is correct.

Check whether remote control

needs to replace battery.

Machine automatically

shut down

| Whether set sleep or not.
Check whether there is sudden

power outage.

 | The system will automatically shut down if the interactive intelligent Panel’s external channel loses signal for 5 minutes. Please check the input and connection of the

signal.

---|---

PC Mode

Signal out of range

| Check whether display is set

correctly.

---|---
Check whether resolution is the best

resolution.

Adjust line and field synchronization

in menu.

Background has vertical lines or

streaks

| Select automatic correction in menu.
---|---
Adjust clock and phase position in

menu.

Image lack of color, color is incorrect

| Check whether VGA is not well

connected or has quality problem.

Adjust chromatic and brightness or

contrast in menu.

Display format that is not supported

| Select automatic correction in menu.
Adjust clock and phase position in

menu.

TOUCH FUNCTION

Touch function

invalid

| Check whether the size of article

touched is comparable with finger.

---|---
Touch positioning

not correct

| Check whether touch pen is facing

the screen.

---|---

VIDEO FUNCTION CANNOT WORK NORMALLY

No picture and no sound

| Check whether the machine is

started state.

---|---
Check whether signal wire is well plugged, whether INPUT is

corresponding to it.

If in internal computer mode, check whether internal computer is

started.

With horizontal or

vertical stripes or

| Check whether signal wire is well

connected.

image dithering| Check whether other electronic

equipment or power tools are placed around the machine.

---|---

No color, color is weak, or image is weak

| Adjust chromatic and brightness or

contrast in menu.

Check whether signal wire is well

connected.

AUDIO FUNCTION CANNOT WORK PROPERLY

With image but without sound

| Check whether mute button is

pressed for mute.

---|---
Press VOL + / – to adjust volume.
Check whether audio line is

connected correctly.

Only one speaker has sound

| Adjust sound balance in menu.
---|---
Check whether computer sound control panel only sets up one sound

channel.

Check whether audio line is

connected correctly.

HDMI output

without sound

| Check whether connect external

device.

Maintenance

Proper maintenance can avoid many early faults and regular careful cleaning can make machine brand new. Please unplug power plug before cleaning and maintenance, to prevent electric shock.

Clean Screen

Please mix and stir even a little fabric softener or tableware detergent with alcohol. Please use a soft cloth to be completely soaked in the mixture. Please take out cloth and twist to half dry state to wipe machine screen. Repeat for several times, pay attention not to squeeze water flow into machine when wiping machine.

Clean Face Frame
Please use dry, soft, lint-free cloth to wipe front frame.

No Use of Machine for A Long Time
In case of no use of machine for a long time, such as holiday, please make sure to unplug the plug to prevent any possible dangers caused by power supply ripple from lightning.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>