Clarke CHT876 Single Hand Riveter Instruction Manual
- June 5, 2024
- Clarke
Table of Contents
SINGLE HAND
RIVETER
MODEL NO: CHT876
PART NO: 1801876
USER INSTRUCTIONS
ORIGINAL INSTRUCTIONS
INTRODUCTION
Thank you for purchasing this CLARKE Rivet Gun. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you and you can look forward to your purchase giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
FITTING AND STORING THE NOZZLES
The CHT876 rivet gun is equipped with a choice of 4 different size nozzles to
suit different rivets. Choose the rivet to be used for the job.
The sizes available are:
- 3/32” (2.4 mm)
- 1/8” (3.2 mm)
- 5/32” (4.0 mm)
- 3/16” (4.8 mm)
NOTE: The dimensions are engraved on each one.
- Screw your chosen nozzle into the tip of the rivet gun, finger tight.
- Always store the unused nozzles by screwing them back into the rivet gun for safekeeping.
OPERATION
-
When items are to be riveted together, the hole diameter must be nominally larger than the outer diameter of the rivet. Ensure that the hole is perpendicular with the surface of the workpiece components.
-
Insert the rivet into the hole of the workpiece components.
-
Part the handles to prepare the action of the gun.
• This will enable the rivet stem to enter the rivet gun as far as it will go, with the handles fully extended. -
Ensure the rivet gun is perpendicular to the workpiece and the flange of the rivet is pressed against it.
-
Squeeze the rivet gun handles together to expand the rivet.
-
If the rivet stem does not break off at the first stroke, part the handles and repeat step 5.
-
Part the handles again and the broken rivet stem should be ejected from the nozzle.
ADJUSTMENT
If the internal claws of the rivet gun fail to grip the stem of the rivet, the mechanism will need adjusting.
- Loosen the locking sleeve and rotate the nozzle clockwise to tighten (anti-clockwise to loosen).
- Part the handles to extend the riveter and to tighten the internal claws.
- Re-tighten the locking nut.
A SELECTION FROM THE VAST RANGE OF
QUALITY PRODUCTS
AIR COMPRESSORS From DIY
to industrial, Plus air tools, spray guns, and accessories.
GENERATORS
Prime duty or emergency standby for business, home, and leisure.
POWER WASHERS
Hot and cold, electric and engine driven – we have what you need
WELDERS Mig, Arc, Jig and Spot. From DIY to auto/industrial.
METALWORKING Drills, grinders and saws for DIY and professional use.
WOODWORKING Saws, sanders, lathes, mortises and dust extraction.
HYDRAULICS Cranes, body repair kits, transmission jacks for all types of
workshop use.
WATER PUMPS Submersible, electric and engine driven for DIY, agriculture
and industry.
POWER TOOLS Angle grinders, cordless drill sets, saws and sanders.
STARTERS/CHARGERS All sizes for car and commercial use.
PARTS & SERVICE:020 8988 7400
E-mail:Parts@clarkeinternational.com
or Service@clarkeinternational.com
SALES: UK 01992 565333 OR Export 00 44 (0) 01992 565335
Clarke
INTERNATIONAL
Hemnall Street, Epping, Essex CM16
6DBwww.clarkinternational.com
Parts & Service: 020 8988 7400 / E-mail:
Parts@clarkeinternational.com or
Service@clarkeinternational.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>