Micro Mobility MICROSE Smart Micro Egg User Guide
- June 5, 2024
- Micro Mobility
Table of Contents
MICRO SE Smart Micro Egg
User Guide
-Micro Smart Egg is a smart companion designed to be used on Micro Mini and Micro Maxi scooters. The Smart Egg can also be mounted on other Micro Scooter T-bars.
Know the Smart Micro Egg
Getting started
Step 1. Download the Smart Micro Egg App in the App Store or Google Play
to your smart device (Phone, Tablet, TV)
(Illustration 2: App download info, name and link and QR code)
(illustration 2a: Chinese store and info for Chinese manual only).
Step 2. Activate the egg:
- Open the dust cover (B) to find the charging port (C), and connect the device to a safe power source (5V ⎓ 1A) using the provided power cable (D).
- Shake it or gently knock it against a hard surface for 5 seconds, when the LED indicator blinks in blue, your Smart Egg is activated. See Fig. 2
Step 3. Unplug the cable, and put the dust cover back in place. Strap the device to your Mini or Maxi scooter using the silicon belt provided. See Fig 3
Step 4. Open the Smart Micro Egg APP, and follow the instruction to start your ride! (more info see below instructions) Reminder: please keep the scooter straight for calibration before starting any ride.
For installation instruction video, please visit our YouTube channel
www.Youtube.com/xxxxxxx
Smart Micro Egg – Hardware
LED indicator:
No Light – The device is not activated, please go back to “Getting started”
Red Light – Battery is low, please charge.
Slow blinking blue light – Smart Micro Egg is activated and in idle mode.
Frequent blinking blue light – Smart Micro Egg is disconnected but is actively
looking for connection.
Constant blue light – Smart Micro Egg is connected to your smart device.
Battery Charging.
Connect the device to a 5V ⎓ 1A USB power adaptor, using the provided charging
cable.
DC 3.5 mm
The LED indicator turns red while charging, and turns off when fully charged.
Recharge time: 2 hours
Bluetooth Set up info (only by the factory):
- The operating frequency bands of this device are 2.400 – 2.4835 GHz ISM band.
- The maximum output power of this device is +4dBm.
- Recommended range: 5 meters.
Smart Micro Egg – App
Start with registering an account. Note that you need to be over 16 or have a
guardian present to create an account for the first time.
From the account, you can create profiles for each Micro Mini or Micro Maxi
that is to be used within the account.
-
Choose the scooter you ride and your color of choice.
-
Add a nickname, choose gender and your basic profile design (only nickname is
mandatory) -
Follow the instructions in the app to connect the smart egg. If this doesn’t work, see
below section for more help.
– Make sure your Smart Micro Egg is activated (see Getting Started and LED indicator)
– Turn on Bluetooth on your smart device (Phone, Tablet, TV)
– Shake the Smart Micro Egg while your smart device is searching for Bluetooth devices to make sure it’s awake and discoverable.
– If there are more than one Smart Micro Egg present, the APP automatically recognizes the egg to which it was connected to.
– If the Egg isn’t visible from the beginning, please go under “settings” and press on “connect”. -
Congratulations! It’s now time to have some fun! Note that you can always go back to create additional profiles or choose to enter the app in parent mode.
Things to do in the app as a child:
Open the map and press “START” to see how fast, far, and long you have driven.
You can also see hot spots where you have spent at least five minutes as well
as statistics over time. Press “STOP” if you want the statistics to update.
(we recommend never to use the map function while driving)
To open up the “BEAT THE CLOCK” and “RACE” modes you first need to pass your
driving test.
-
Open “TUTORIAL” and learn how to operate the app and smart egg. Follow the instructions and try to collect 60 coins to pass the test. You will learn to control the steering, avoid hitting people and objects and stop to wait for green lights at street crossings. If you hit an object you lose three coins and if you hit a person you lose one heart.
Did you get the license? Congratulations! Time for more fun activities. -
In “BEAT THE CLOCK” you simply want to get as far as possible without losing your life.
If you hit an object you lose 3 seconds and if you hit a person you lose one of your hearts. Be aware, that the further you get the faster you will drive! -
In “RACE” you can choose “OFFLINE RACE” to race against the computer or “QUICK CHALLENGE” to race against friends. To race against friends, first, you need to add friends through your profile page.
There are two currencies in the app.
- Coins are collected in the game modes and can be used buy new accessories and cool items in the SHOP. After purchasing new items, you can go to “EDIT” to equip your profile with the newly bought items and make your profile completely unique!
- Diamonds are collected by taking your scooter and smart egg out for a ride WITHOUT being connected to a smart device. For every two minutes spent driving you will collect one diamond when the Smart Egg is connected to your smart device again. Diamonds can be used to access new worlds in the WOLRDS tab in the SHOP.
Continue as a parent
The app contains two primary areas with the kid’s area covered above. When
opening the APP, you can alternatively access the parents/guardians section by
pressing “CONTINUE AS A PARENT”.
The parent section is there for added safety and allows you to see how the app
and smart egg is used. You can also access a GPS function to see where your
child is. You cannot play games or compete in the parent area.
Switch between the user profiles in the main parental screen to follow the
various profiles in the account. The profile that is showing is the one
currently covered in all the functions in the parental view.
To see where your child is, press MAP and START. Note that the tracking
function only works if the child has brought a smart device (phone or tablet)
when out riding and that smart device is connected to the smart egg. You can
also see HOTSPOTS where the child spends more time. A minimum of 5 minutes
spent in an area will trigger a hotspot and when a hotspot is pressed you see
when it was last visited. Under STATISTICS you can see speed, distance, and
time spent over time so long as the child has been riding with a smart device
connected to the smart egg. Note that the MAP features are created for
increased usability and should never be used in emergencies.
Under STATISTICS you can see general statistics about your child driving
history as well as see who he/she has befriended. For extra safety, you can
also block friends that you haven’t approved. In addition, you can see what
ACHIEVEMENTS the child has passed and a leaderboard.
Under SEND NOTIFICATION you can send messages to the child when he/she is using a smart device connected to the smart egg. Note that this is a feature for increased usability and should never be used in emergencies.
Warnings:
- The device is not recommended for use by children under 3 years of age
- Read instructions thoroughly and keep for future reference.
- This device contains electrical equipment that could cause injury if not handled properly.
- This toy contains a battery that is non-replaceable. Do not attempt to replace the battery or open the enclosure or disassemble the device. Doing so can result in a safety hazard and will void the warranty.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not use the device if it is damaged. Substances in the device and its battery may harm the environment or cause injury if handled or disposed of improperly.
- Do not dispose of the device in a fire. The battery could explode.
- Do not expose the device to extremely high or low temperatures or heavy rain.
- The device is water splash-proof only (IPX4). Do not immerse in water.
- Store the product in a dry and moisture-free environment.
- Keep a safe distance to other people and objects. Collision hazard. Use of 1 or more devices by several people within the same playing area can cause serious injuries.
- Usage of the device while under the influence of alcohol or drugs is prohibited.
- Do not charge the device while it is wet.
- Do not use the device while charging it.
- Limit the time of continuous usage (make regular stops).
Caution:
- Disposal of a battery into fire or a hot oven, mechanically crushing or cutting, can result in an explosion.
- Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.
- Regularly check for damage to the power cable, charging port, and device sealing condition, and in the event of damage, it shall not be used until the damage is repaired.
Maintenance
Clean the product with a soft, moist cloth after each use, and regularly check for visible damage or changes. Do not use solvents, detergents, soap powder, or hot water under any circumstances.
Disposal and recycling Information:
- The symbol on the device and its packaging signify that this device must be disposed of separately from ordinary household wastes at its end of life because it contains a battery and is electronic equipment. For information about where to recycle contact your local waste disposal authority or the retailer where you bought the device.
Regulatory Information:
Federal Communications Commission (FCC) Statement:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. - This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2A2I4MICROSE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CE Statement:
- Micro Mobility Systems AG is authorized to apply the CE mark on its product, thereby declaring conformity to the essential requirements and other relevant provisions of Directive 2014/53/EU and other applicable Directives.
Warranty:
Warranty Conditions
The Micro Smart Egg is subject to a warranty period of 2 years.
To make a warranty claim, please contact our dealer network or customer
service by telephone on
+41 (0) 44 910 11 22 or by e-mail: info@micro.ms
The warranty does not include damage caused by:
- accidents or unforeseeable events (e.g. lightning, flooding, fire, etc.)
- Improper use or transport
- Ignoring safety and maintenance rules
- Any other improper handling or alterations
- Wear and tear