SKC 769-5001 D-TAM Skin Cleanser Instruction Manual
- June 5, 2024
- SKC
Table of Contents
SKC 769-5001 D-TAM Skin Cleanser
INTRODUCTION
Laboratory studies have shown that solubility is key to eff ective removal of chemicals from the skin. D-TAM Skin Cleanser and D-TAM Gold are formulated with nontoxic biodegradable solvents that gently solubilize chemical contaminants on the skin and rinse off clean with water. These unique formulations of high molecular weight materials will not enhance chemical absorption into the body. D-TAM products cover a broad spectrum of chemical solubilities ranging from semipolar compounds that are somewhat soluble in water to highly oil-soluble (lipophilic) chemicals. See the selection guide below.
Cleaning and Decontamination
- DO NOT WET SKIN. Apply D-TAM directly to contaminated skin. Rub gently to work up a white lather. Rinse thoroughly with lukewarm water and pat dry.
- Retest with appropriate Skin SWYPE to verify decontamination is complete.
- Repeat Steps 1 and 2 if necessary. D-TAM is most eff ective in reducing skin absorption when used promptly after chemical exposure
occurs.
Skin Decontamination Selection Guide
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC’s sole liability and the buyer’s exclusive remedy. To view the
complete SKC Limited Warranty and Return Policy, go to skcinc.com/warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>