Koopao EC43 Magnetic Car Wireless Charger Instruction Manual
- June 5, 2024
- Koopao
Table of Contents
Koopao EC43 Magnetic Car Wireless Charger Instruction Manual
Thank you for choosing KOOPAO’s Magentic Car Wireless Charger.
To ensure that you have a good user experience, please Do read below
instructions before using :
- *Please use a 18W or above cigarette charger adaptor to support power to our product.
- Please use the fast charging cable support at least 2A current.
- Please we recommend that you use a Mag Safe case or naked iPhone 13/12. So that it will get the stronger magnetic.
Attention
- It’S is forbidden to immerse the product in water to avoid short circuit of the internal circuit.
- It is forbidden to disassemble or beat the product by yourself to avoid damage to the product.
- Do not put any metal or card to the wireless car charger, include metal pads, credit cards, door keys, coins, metal, or NFC cards to avoid charging failure.
- When using a separate magnetic ring to connect to this product for charging, please find a good position for the wireless phone charger before connecting to this product for charging. otherwise it will cause the charging speed to be slow and the mobile phone to heat up.
Features
- Wireless charging for iPhone 12/13 series.
- The wireless charger supports fast charging 5W/7.5W/10W/15W.
- The new shock absorption structure design makes charging safer and adapts to various complex road conditions.
- Strong magnetic absorption, the mobile phone is firmly adsorbed, and the charging is more convenient.
- It is fixed at the air outlet of the car and can be adjusted at a full 360°angle，and the direction of the phone can be adjusted at will.
- Over-current protection,over-heat protection and short circuit protection.
- Certification:FCC,CE,ROHS
Warranty:
We are free to 90 days return/refund and 12 Months Warranty. If you have any
questions, please contact us and we’ll provide you with a satisfied solution
Email: koopao_cust@163.com
What You Get
- 1Magnetic car charger, 12A USB C charger cable
- 1* Manual
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.