Koopao BA01W Bluetooth Game Controller Adapter User Manual
- June 5, 2024
- Koopao
Table of Contents
Koopao BA01W Bluetooth Game Controller Adapter
Button Definition
- Power on: After you plug the adapter to any device, then press the red key of the adapter for almost 1 second into pairing mode with a blinking blue LED
- Power off: Press the red key of the adapter for almost 1 second out of pairing mode, the blue led is off
- Mute: Press the blue key of the adapter, pause it, and mute it.
Product Specification
- Model: Thunderobot Bluetooth 5.0 Audio Transmitter
- Material: ABS
- Color: Black/White
- Input port: USB Type C/ USB A
- Transmission distance: 10m/ 33ft
- Frequency range: 2.402GHZ – 2.480GHZ
- Bluetooth version: BT 5.0
- Product Size: 4 x 1.4 x 0.5cm
- Support Platforms: Nintendo Switch, Switch Lite, PS4, PS5, PC
- Supported protocols: SBC, A2DP, AFH, HFP, HSP, AVRCP
How to use this audio adapter
- Plug ur adapter into any device, which has a type-c or USB port, also this port must support the audio output function. (Just like your Switch, Switch lite, Switch Host, Phone, Notebook, iPod)
- Press the red key of the adapter for almost 1 second into pairing mode with a blinking blue LED
- Set your Bluetooth device (Just like your Bluetooth earphone) to Bluetooth pairing status
Note please: if you wanna connect to your AirPods, remember to open the headphone cover of your AirPods, then long press the back pairing button of your AirPods until the pairing is successful, then you can take out your two earpieces out of your AirPods case.
- Pairing is successful once the Blue Led light is off.
Note please: When the blue led light is off if your Bluetooth device still couldn’t connect to our adapter, then you can follow the above steps, and restart again. Still, couldn’t remember to contact us via customer service e-mail or through Amazon(“order”- “sold by”- “contact seller”) for our help, we will offer you the best solution.
Package List
- 1x Thunderbolt Bluetooth Audio Adapter
- 1x USB C to USB A Adapter
- 1x English Manual
Warm Tips
- Support only one Bluetooth headphone or speaker at the same time.
- Support only audio output, doesn’t support voice chat currently.
- The closer the Bluetooth device is to our audio adapter, the faster the connection
- The pairing list will be automatically cleared after power off; after power on, it will automatically connect to the Bluetooth device with the strongest signal nearby
- Just turn on only one Bluetooth device at the same time, don’t turn on all of your bluetooth devices because the adapter will connect to the Bluetooth device, which has the strongest signal.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment