FS FC730-4K-N Ultra HD 4K Video Conference Camera User Manual
- June 5, 2024
- FS
Table of Contents
FC730-4K-N Ultra HD 4K Video Conference Camera
FC730-4K-N User Manual
FC730-4K-N User Manual
Model : FC730-4K-N
FC730-4K-N USER MANUAL
CONTENTS
1. Note……………………………………………………………………………………………………………………………………………………………… 4 2.
Packing List…………………………………………………………………………………………………………………………………………………….4 3.
Quick Start…………………………………………………………………………………………………………………………………………………….. 4 4.
System Select Video Format……………………………………………………………………………………………………………………………. 5
5. About Product……………………………………………………………………………………………………………………………………………….. 6
5.1
Features…………………………………………………………………………………………………………………………………………………………………………………… 6
5.2 Product
Specification………………………………………………………………………………………………………………………………………………………………… 6
5.3 Interfaces and
Buttons………………………………………………………………………………………………………………………………………………………………. 7 5.4
Dimension………………………………………………………………………………………………………………………………………………………………………………..
8 5.5 Remote
Control………………………………………………………………………………………………………………………………………………………………………… 9 5.6
RS232
Interface………………………………………………………………………………………………………………………………………………………………………..12
5.7 VISCA
Network…………………………………………………………………………………………………………………………………………………………………………12 5.8
Serial Communication
Control…………………………………………………………………………………………………………………………………………………..13
6. GUI Settings…………………………………………………………………………………………………………………………………………………. 13
6.1 MENU……………………………………………………………………………………………………………………………………………………………………………………..
13 6.2
EXPOSURE……………………………………………………………………………………………………………………………………………………………………………….14
6.3
COLOR…………………………………………………………………………………………………………………………………………………………………………………….14
6.4 IMAGE…………………………………………………………………………………………………………………………………………………………………………………….
15 6.5
P/T/Z……………………………………………………………………………………………………………………………………………………………………………………… 15
6.6 NOISE
REDUCTION……………………………………………………………………………………………………………………………………………………………………16 6.7
SETUP……………………………………………………………………………………………………………………………………………………………………………………..16
6.8 COMMUNICATION
SETUP………………………………………………………………………………………………………………………………………………………….16 6.9 RESTORE
DEFAULT………………………………………………………………………………………………………………………………………………………………….. 17
7. Network Function………………………………………………………………………………………………………………………………………….17
7.1 Operating
Environment…………………………………………………………………………………………………………………………………………………………… 17 7.2
Equipment
Installation……………………………………………………………………………………………………………………………………………………………..17
7.3 Internet
Connection………………………………………………………………………………………………………………………………………………………………… 17 7.4
Camera Controlled by
LAN………………………………………………………………………………………………………………………………………………………..18 7.4.1 Setup
IP Address……………………………………………………………………………………………………………………………………………………………………18
7.4.2 Visit/Access
Camera……………………………………………………………………………………………………………………………………………………………….20 7.5
Camera Controlled by
WAN……………………………………………………………………………………………………………………………………………………… 20 7.5.1 Setup IP
Controlled by Dynamic DNS………………………………………………………………………………………………………………………………………
20 7.5.2 Dynamic DNS Visit
Camera……………………………………………………………………………………………………………………………………………………..20 7.5.3 VLC
Stream Media Player
Monitor……………………………………………………………………………………………………………………………………………21 7.6 Camera
Parameter Setup…………………………………………………………………………………………………………………………………………………………. 21
7.6.1 Homepage
Introduction…………………………………………………………………………………………………………………………………………………………21 7.6.2
Video
Settings……………………………………………………………………………………………………………………………………………………………………….23
7.6.3 Image
Settings……………………………………………………………………………………………………………………………………………………………………… 24
7.6.4 Audio
Settings……………………………………………………………………………………………………………………………………………………………………… 24
7.6.5 System
Settings……………………………………………………………………………………………………………………………………………………………………. 25
7.6.6 Network
Settings………………………………………………………………………………………………………………………………………………………………….. 26
www.fs.com
2
FC730-4K-N USER MANUAL
7.6.7 Device
Information……………………………………………………………………………………………………………………………………………………………….. 27
7.7 Download the Upgrade
Program……………………………………………………………………………………………………………………………………………… 27
8. Maintenance and
Troubleshooting…………………………………………………………………………………………………………………27
www.fs.com
3
FC730-4K-N USER MANUAL
1.Note
Electric Safety Installation and operation must accord with electric safety
standard. Use Caution to Transport Avoid stress, vibration or soakage in
transport, storage and installation. Polarity of Power Supply The power supply
of this product is +12V, the max electrical current is 2A. Polarity of the
power supply plug drawing shows as below.
Installation Precautions Do not grasp the camera lens when carrying it. Don’t touch camera lens by hand. Mechanical damage may be caused by doing so. Do not use in corrosive liquid, gas or solid environment to avoid any cover (plastic material) damage. Make sure there is no obstacle within rotation range. Please never power on before installation is completed. Do not Dismantle the Camera We are not responsible for any unauthorized modification or dismantling.
Specific frequencies of electromagnetic field may affect the image of the
camera!
2.Packing List
When you unpack, check that all the supplied accessories are included:
Name
Camera
Power Adapter
Power Cable
RS232 Cable USB Cable
Remote Control
3.Quick Start
User Manual
Quantity 1 1 1 1 1 1 1
1.Please check connections are correct before starting.
www.fs.com
4
FC730-4K-N USER MANUAL
2. Connect the power adapter to the power connector on the rear panel of the
camera. The power indicator on the front panel of the camera is on. 3.After
the camera is powered on, it starts to initialize, right up to the limit
position, and then both horizontal and vertical go to the middle position, the
motor stops running, and the initialization is completed. (Note: If preset 0
is saved, PTZ will be move to preset 0)
4.System Select Video Format
Video Format
HDMI
0
1080P60
0
1
1080P50
1
2
1080I60
2
3
1080I50
3
4
1080P30
4
5
720P60
5
6
1080P29.97
6
7
1080I59.94
7
8
1080P59.94
8
9
720P59.94
9
A
4KP29.97
A
B
1080P60
B
C
4KP25
C
D
4KP30
D
E
1080P25
E
F
720P50
F
SDI
1080P60 1080P50 1080I60 1080I50 1080P30 720P60 1080P29.97 1080I59.94
1080P59.94
720P59.94 1080P29.97
1080P60 1080P25 1080P30 1080P25 720P50
www.fs.com
5
FC730-4K-N USER MANUAL
5.About Product
5.1 Features
4K Ultra HD With a new generation of SONY 1/1.8-inch, maximum 8.42 million
pixels high-quality UHD CMOS sensor, 4K (3840×2160) ultra-high resolution
images are available. And backward compatible with 1080P, 720P and other
resolutions. 60° Wide-angle Lens + 20x Optical Zoom Exclusively customized
ultra-high resolution 4K super wide-angle lens, 20x optical zoom, horizontal
field of view up to 60°. HDMI 1.4b Support HDMI 1.4b version, and can directly
output 4K uncompressed digital video. Low Light The application of 3D noise
reduction algorithm greatly reduces image noise. Even under the condition of
ultra-low illumination, it still keep the picture clean and clear, and the SNR
of image is as high as 55dB. Multiple Interfaces Support HDMI 1.4b and 3G-SDI
interface,effective transmission distance up to 150meters (1080P30). HDMI, LAN
or 3G-SDI,LAN can output 2 high-definition digital signals at the same time.
Remote Control Through the RS232 and RS485 serial ports, the camera can be
controlled remotely.
5.2 Product Specification
Name
FS FC730-4K-N
Camera Signal System Sensor
HDMI: 4KP25, 4KP30, 4KP29.97, 1080P25, 1080P30, 1080P50, 1080P60, 1080P59.94, 1080P29.97, 1080I50, 1080I60, 1080I59.94, 720P50, 720P60, 720P59.94 3G-SDI: 1080P25, 1080P30, 1080P50, 1080P60, 1080P59.94, 1080P29.97, 1080I50, 1080I60, 1080I59.94, 720P50, 720P60, 720P59.94 1/1.8 inch, CMOS,Max Effective Pixel: 8.42M
Scanning Mode
Progressive
Lens
20x, f = 6.25mm ~ 125mm, F1.58 ~ F3.95
Digital Zoom
16x
Minimum Illumination
0.5 Lux @ (F1.8, AGC ON)
Shutter
1/30s ~ 1/10000s
White Balance
Auto, Indoor, Outdoor, One Push, Manual
Backlight Compensation
Support
Digital Noise Reduction
3D Digital Noise Reduction
Signal Noise Ratio
55dB
Horizontal Angle of View
60° ~ 3.5°
Vertical Angle of View
35.7° ~ 2.0°
Horizontal Rotation Range
±170°
Vertical Rotation Range
Pan Speed Range Tilt Speed Range
H & V Flip
-30° ~ +90° 1.7° ~ 100°/s 1.7° ~ 69.9°/s Support
Image Freeze Number of Preset Preset Accuracy
Support 255 0.1°
USB Features
Operate System
Windows 7/8/10, Mac OS X, Linux, Android
Color System / Compression Video Format
YUY2 / H.264 / MJPEG YUY2: max to 1080P@30fps H.264 AVC: max to 2160P@30fps
www.fs.com
6
FC730-4K-N USER MANUAL
USB Audio USB Video Protocol UVC PTZ Network Features Video Compression Video
Stream First Stream Resolution Second Stream Resolution Bit Rate Type Frame
Rate Audio Compression Audio Bit Rate Protocols Input/Output Interface LINE IN
Interface LINE OUT Interface
Communication Interface
Power Jack Network Interface
USB Interface
3G-SDI Interface HDMI Interface Physical Parameter Input Voltage Current
Consumption Operating Temperature Storage Temperature Power Consumption Size
Net Weight
5.3 Interfaces and Buttons
MJPEG: max to 2160P@30fps Support UVC 1.1 Support
H.264/H.265/MJPEG First Stream, Second Stream 3840×2160, 1920×1080, 1280×720,
1024×576, 960×540, 640×480, 640×360 1920×1080, 1280×720, 1024×576, 720×576
(50Hz support), 720×480 (60Hz support), 720×408, 640×360, 480×270, 320×240,
320×180 Variable Rate, Fixed Rate 50Hz: 1fps ~ 50fps,60Hz: 1fps ~ 60fps AAC,
G711A 96Kbps, 128Kbps TCP/IP, HTTP, RTSP,RTMP(S),NDI®|HX,ONVIF,
DHCP,SRT,Multicast
1 x LINE IN: 3.5mm Line Interface 1 x LINE OUT: 3.5mm Line Out Interface 1 x
RS485: 2pin phoenix port, Max Distance: 1200m, Protocol: VISCA / Pelco-D /
Pelco-P 1 x RS232 IN: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA /
Pelco-D / Pelco-P 1 x RS232 OUT: 8pin Min DIN, Max Distance: 30m, Protocol:
VISCA network use only JEITA type (DC IN 12V) 1 x RJ45: 10/100/1000M Adaptive
Ethernet Port, support PoE power supply 1 x USB2.0:Type A 1 x USB3.0:Type B 1
x 3G-SDI: BNC type, 800mVp-p, 75. Along to SMPTE 424M standard 1 x HDMI:
Version 1.4b
DC 12V / PoE (802.3af) 1.0A (Max) -10°C ~ 40°C -40°C ~ 60°C 12W (Max) 168.4 x
141.5 x 164.5mm About1.4Kg
www.fs.com
7
FC730-4K-N USER MANUAL
Item
Name
1
LINE IN Interface
2
LINE OUT Interface
3
System Select Switch
4
RS485 Interface
5
RS232 IN Interface
6
RS232 OUT Interface
7
DC 12V Interface
8
Network Interface
9
USB 2.0 Interface
10
USB 3.0 Interface
11
3G-SDI Interface
12
HDMI Interface
13
RESTORE Button
www.fs.com
8
FC730-4K-N USER MANUAL 5.4 Dimension
5.5 Remote Control
www.fs.com
9
FC730-4K-N USER MANUAL
Key Description 1. Standby Key Press this button to enter standby mode. Press it again to enter normal mode. Note: Power consumption in standby mode is approximately half of the normal mode 2. Number Key To set preset or call preset. 3. *Key Used with other buttons. 4. Preset Key Set preset: Store a preset position. [SET PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position. 5. HOME Key Confirm menu, enter the submenu or the PTZ will back to the middle position after pressed it 6. Return Key Return back the last level menu 7. Zoom Key Slow Zoom: Zoom In [+] or Zoom Out [-] slowly Fast Zoom: Zoom In [+] or Zoom Out [-] fast 8. Left/Right Setting Key Press with 1 button and 2 button setting the direction of the Pan-Tilt. Simultaneously press L/R Set + 1[STD]: set the Pan-Tilt turn the same direction as the L/R Set. Simultaneously press L/R Set + 2[REV]: set the Pan- Tilt turn the opposite direction as the L/R Set. 9. Focus Key
www.fs.com
10
FC730-4K-N USER MANUAL
Used for focus adjustment. Press [AUTO] adjust the focuses on the center of
the object automatically. Press [MANUAL] adjust the focus on the center of the
object manual. MANUAL button, and adjust it with [Far] (Focus on far object)
and [NEAR] (Focus on near object). 10. Selection Key Press the button
corresponding to the camera you want to operate with the remote controller.
11. #Key Used with other buttons. 12. IR Remote Control Key
[]+[]+[F1]: Address 1 []+[]+[F2]: Address 2 []+[]+[F3]: Address 3
[]+[]+[F4]: Address 4 13. Reset Key Clear preset: Erase a preset position.
[CLEAR PRESET] + Numeric button (0-9) Or: []+[#]+[CLEAR PRESET]: Erase all
the preset individually. 14. PTZ Control Key Press arrow buttons to perform
panning and tilting. Press [HOME] button to face the camera back to front. 15.
Menu Key MENU: enter or exit OSD MENU. 16. Backlight Key BLC ON/OFF: Press
this button to enable the backlight compensation. Press it again to disable
the backlight compensation. NOTE: Effective only in auto exposure mode. If a
light behind the subject, the subject will become dark. In this case, press
the backlight ON/OFF button. To cancel this function, press backlight ON/OFF
button. 17. PTZ Reset Key Preset Pan/Tilt self-test. 18. Image Freezing
Function Manually freeze: Open the freezing function after press the remote
control [F4], display “Freeze” on the left upper corner character, after five
seconds display disappear automatically. If you want to cancel the freeze,
press [F4] key and then can return to normal, display “Unfreeze” on the left
upper corner, after five seconds display will disappear automatically.
Recalling the Preset image Freeze: By the OSD Menu “Image Freeze” to set
recalling the preset image freeze function. After the function is opened, the
screen will stay in before Recalling the Preset when Recalling the Preset, the
screen can be switched to the preset position screen until the camera points
to the preset position. 19. Shortcut Set
[]+[]+[1]: OSD menu default English []+[]+[3]: OSD menu default Chinese
[]+[]+[4]: Display current IP address []+[]+[6]: Quickly recover the default
[]+[]+[8]: View the camera version []+[]+[9]: Quickly set up inversion
[]+[]+[MANUAL]: Restore default IP address
www.fs.com
11
FC730-4K-N USER MANUAL 5.6 RS232 Interface
No. 1 2 3 4 5 6 7 8 The correspondence between the camera and Windows DB-9
pin: Camera 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8.NC
The correspondence between the camera and the Mini DIN pin: Camera 1.DTR 2.DSR
3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8.NC
5.7 VISCA Network
Function DTR DSR TXD GND RXD GND
IR OUT NC
Windows DB-9 1.CD 2.RXD 3.TXD 4.DTR 5.GND 6.DSR 7.RTS 8.CTS 9.RI
Mini DIN 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.NC 8.NC
www.fs.com
12
FC730-4K-N USER MANUAL
5.8 Serial Communication Control
RS232 Communication Control The camera is controlled via RS232. The RS232
serial port parameters are as follows: Baud rate: 2400/4800/9600/38400;
Starting Position: 1 bit Data bit: 8 bits Stop bit: 1 bit Check digit: None
RS485 Communication Control Control camera via RS485, half duplex mode: Baud
rate: 2400/4800/9600/38400; Starting position: 1 bit Data bit: 8 bits Stop
bit: 1 bit Check digit: None After power on, the camera goes to the upper
right limit and then back to the middle position. The zoom lens is pulled to
the farthest position, auto focus, and the aperture is adjusted to the default
value. If the camera has preset 0 saved, the camera will be set to position 0
after the initialization is completed. At this point, the user can use the
serial port command to control the camera.
6.GUI Settings
6.1 MENU
Press [MENU] button to display the main menu on the normal screen, using arrow
button to move the cursor to the item to be set. Press the [HOME] button to
enter the corresponding sub-menu.
MENU
Exposure
Color
Image
P/T/Z
Noise Reduction
Setup
Communication Setup
Restore Default
www.fs.com
13
FC730-4K-N USER MANUAL
MENU [Home] Enter [Menu] Exit
6.2 EXPOSURE
Move the main menu cursor to [EXPOSURE], and press [HOME] key enter the
exposure page, as shown in the following figure.
EXPOSURE
Mode
Auto
ExpCompMode Off
Backlight
Off
Gain Limit
9
Anti-Flicker
50Hz
Meter
Average
DRC
0
Select Item
Change Value
[Menu] Back
Mode: Exposure mode, optional items: Auto, Manual, SAE, AAE, Bright.
ExpCompMode: Exposure the compensation mode, optional items: On, Off
(Effective only in Auto mode). ExpComp: Exposure the compensation value,
optional items: -7 ~ 7 (Effective only in ExpCompMode item to On). Backlight:
Set the backlight compensation, optional items: On, Off (Effective only in
Automode). Bright: Intensity control, optional items: 0 ~ 17 (Effective only
in Bright mode). Gain Limit: Maximum gain limit, optional items: 0 ~ 15
(Effective only in Auto, SAE, AAE, Bright mode). Anti-Flicker: Anti-flicker,
optional items: Off, 50Hz, 60Hz (Effective only in Auto, AAE, Bright mode).
Meter: Optional items: Average, Center, Smart, Top. Iris: Aperture value,
optional items: F1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0,
F9.6, F11.0, Close (Effective only in Manual, AAE mode). Shutter: Optional
items: 1/30, 1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725,
1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000 (Effective only in
Manual, SAE mode). Gain: Optional items: 0 ~ 7 (Effective only in Manual
mode). DRC: DRC strength, optional items: 0 ~ 8.
6.3 COLOR
Move the main menu cursor to [COLOR], and press [HOME] key enter the color
page, as shown in the following figure.
COLOR
WB Mode
Auto
RG Tuning
0
BG Tuning
0
Saturation
100%
Hue
7
Select Item Change Value [Menu] Back WB-Mode: White balance mode, optional items: Auto, Indoor, Outdoor, One Push, Manual.
www.fs.com
14
FC730-4K-N USER MANUAL
RG Tuning: Optional items: -10 ~ +10(Effective only in Auto mode). BG Tuning:
Optional items: -10 ~ +10(Effective only in Auto mode). Saturation: Optional
items: 60% ~ 200%. Hue: Optional items: 0 ~ 14. RG: Red gain, optional items:
0 ~ 255 (Effective only in Manual mode). BG: Blue gain, optional items: 0 ~
255 (Effective only in Manual mode).
6.4 IMAGE
Move the main menu cursor to [IMAGE], and press [HOME] key enter the image
page, as shown in the following figure.
IMAGE
Luminance
7
Contrast
7
Sharpness
6
Flip-H
Off
Flip-V
Off
B&W-Mode
Off
Gamma
EXT
Style
Default
Select Item Change Value
[Menu] Back
Luminance: Brightness adjustment, optional items: 0 ~ 14. Contrast: Contrast
adjustment, optional items: 0 ~ 14. Sharpness: Sharpness adjustment, optional
items: Auto, 0 ~ 15. Flip-H: Image flipped horizontally, optional items: On,
Off. Flip-V: Image Flip Vertical, optional items: On, Off. B&W-Mode: Optional
items: On, Off. Gamma: Optional items: EXT, PC, 0.48, 0.5, 0.56, 0.63. Style:
Optional items: Default, Norm, Bright, PC.
6.5 P/T/Z
Move the main menu cursor to [P/T/Z], and press [HOME] key enter the P/T/Z
page, as shown in the following figure.
P/T/Z
SpeedByZoom
On
AF-Zone
Front
AF-Sense
High
L/R Set
STD
Display Info
On
Image Freeze
Off
Digital Zoom
Off
Call Preset Speed
24
Pre Zoom Speed
5
Select Item Change Value
www.fs.com
15
FC730-4K-N USER MANUAL
P/T/Z
[Menu] Back
SpeedByZoom: The depth of field scale switch, optional items: On, Off. AF-
Zone: Interested in focusing area, optional items: Front, Top, Center, Bottom.
AF-Sense: Automatic focusing sensitivity options, optional items: Low, Normal,
High. L/R Set: Optional items: STD, REV. Display Info: Optional items: On,
Off. Image Freeze: Optional items: On, Off. Digital Zoom: Optional items: Off,
2x, 4x, 8x, 16x. Call Preset Speed: Optional items: 1 ~ 24. Pre Zoom Speed:
Optional items: 0 ~ 7.
6.6 NOISE REDUCTION
Move the main menu cursor to [NOISE REDUCTION], and press [HOME] key enter the
noise reduction page, as shown in the following figure.
NOISE REDUCTION
NR3D-Level
6
Select Item
Change Value
[Menu] Back
NR3D Level: 3D noise reduction, optional items: Off, 1 ~ 11.
6.7 SETUP
Move the main menu cursor to [SETUP], and press [HOME] key enter the setup
page, as shown in the following figure.
SETUP
Language
EN
DVI Mode
HDMI
Auto Scan Shoot Off
SDI-3G Mode
LEVEL-A
Video Output Auto Inversion
HDMI Off
Tally Mode
On
Language: Optional items: EN, Chinese, Russian. DVI Mode: Optional items: DVI,
HDMI. Auto Scan Shoot: Optional items: On, Off. Auto Inversion: Optional
items: On, Off. SDI-3G Mode: Optional items: LEVEL-A, LEVEL-B. Video Output:
Optionalitems: HDMI,SDI. Auto Inversion: Optionalitems:On,Off. Tally Mode:
Optional items: On, Off.
6.8 COMMUNICATION SETUP
Select Item Change Value [Menu] Back
www.fs.com
16
FC730-4K-N USER MANUAL
Move the main menu cursor to [COMMUNICATION SETUP], and press [HOME] key enter the communication setup page, as shown in the following figure.
COMMUNICATION SETUP
Protocol V_Address V_AddrFix Net Mode Baudrate
VISCA 1 Off Serial 9600
Select Item
Change Value
[Menu] Back
Protocol: Control protocol type, optional items: Auto, VISCA, PELCO-D,
PELCO-P. V_Address: Optional items: 1 ~ 7. (Effective only in Auto, VISCA
protocol). V_AddrFix: Optional items: On, Off (When set to On, useless in 88
30 01 FF Command). P_D_Address: Optional items: 0 ~ 254. (Effective only in
Auto, PELCO-D protocol). P_P_Address: Optional items: 0 ~ 31. (Effective only
in Auto, PELCO-P protocol). Net Mode: Set the serial port network control,
optional items: Serial, Paral. Baudrate: Serial port baud rate, optional
items: 2400, 4800, 9600, 38400.
6.9 RESTORE DEFAULT
Move the main menu cursor to [RESTORE DEFAULT], and press [HOME] key enter the
restore default page, as shown in the following figure.
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
Restore: Confirm restore factory settings, optional items: Yes, No. Note:
Press [HOME] button to confirm, all parameter restore default, include IR
Remote address and VISICA address.
7.Network Function
7.1 Operating Environment
Operating System: Windows 7/8/10, Mac OS X, Linux, Android Network Protocol:
TCP/IP Client PC: P4/128M RAM/40G HDD/ support scaled graphics card, support
DirectX 8.0 or more advanced version.
7.2 Equipment Installation
1.Connect video conference camera to your internet or to your PC via network
cable. 2.Turn on DC 12V power. 3.If the network connection is normal, the
connection light (green) at the network interface will light up within 5
seconds, and the data indicator (orange) will flash, indicating that the
physical connection of the camera has been completed.
7.3 Internet Connection
There are two main ways to connect video conference camera.
www.fs.com
17
FC730-4K-N USER MANUAL Connect by Network Cable:
Connect by Switch/Router:
7.4 Camera Controlled by LAN
7.4.1 Setup IP Address If you don’t know camera IP, view as below: Method 1:
Press * and # and 4 on remote controller one by one, the camera IP address
will be shown on screen. Method 2: Connect camera to PC with network cable,
use “upgrade_En.exe” to search for IP address.
Change IP address, two methods as below: Method 1: Login the web page, select
“Network > Lan Settings”, change IP address, subnet mask and gateway. Click
“Apply” and restart the camera.
www.fs.com
18
FC730-4K-N USER MANUAL
Method 2: Open “upgrade_En.exe”, change IP and click “Set”. After modified, the video conference camera will be restart.
Change IP address: Step 1 Search the IP address of camera.
Step 2 Select the camera IP of you want to change. Step 3 Select the config
dialog of upgrade applets. Step 4 Change the IP address, netmask and gateway,
then click “Set”. Step 5 Finish.
www.fs.com
19
FC730-4K-N USER MANUAL 7.4.2 Visit/Access Camera Input http://192.168.100.88
to IE (better with IE web browser, others will cause little latency), a login
window pop up, input username: admin, password: admin, shown as below:
After login, shown as below:
IE browser does not support H5, you need to use VLC plug-in to view videos.
Please visit VLC website (http://www.videolan.org/vlc) download and install
the 32-bit VLC media player, after it installed, visit video conference camera
will have normal image display. Other mainstream browsers already support H5
and do not need to install the VLC plug-in.
7.5 Camera Controlled by WAN
7.5.1 Setup IP Controlled by Dynamic DNS Two dynamic DNS: Dyndns.org,
3322.org. Router Port Mapping: Take a router for example, enter the Router
Home Page (interface page), select “Advanced”- “Virtual Server”, add a new
port number in “Ext Port”, add a new port number in “Int port”, put camera IP
address to “Internal IP”, then select “Save”, shown as below:
7.5.2 Dynamic DNS Visit Camera
Set domain name to camera, setup the parameter, then dynamic DNS can access
camera. Access link: http://hostname: port number. For example, setup host
computer name: youdomain.f3322.org, the camera port number is 89, the access
link should be http://youdomain.3322.org:89.
www.fs.com
20
FC730-4K-N USER MANUAL
If the camera port default is 80, then unnecessary to input port number, use
host name can access camera directly. 7.5.3 VLC Stream Media Player Monitor
Visit VLC Media Server Procedure Step 1 Open VLC media player. Step 2 Click
“Media > Open Network Stream”, or click “Ctrl + N”; as below:
Step 3 Input URL address: rtsp://ip: port number/1 (First stream); rtsp://ip:
port number/2 (Second stream).
Step 4 Click “Play”.
RTSP port number default 554. If the camera port default is 80, then
unnecessary to input port number of URL address.
7.6 Camera Parameter Setup
7.6.1 Homepage Introduction
Menu All pages include two menu bars: Real time monitoring: displaying video
image Parameter setup: with function buttons. A. Video Viewing Window Video
viewing window must be same as video resolution, the bigger the resolution is,
the bigger the playing area is. Double click viewing window, will show full-
screen, double click again, will return to initialized size.
www.fs.com
21
FC730-4K-N USER MANUAL
Status bar in viewing window shown as below:
1.Video playback pause button: control real-time video pause, stop the last
picture, click recoverable video again. 2.Audio control buttons: can adjust
the volume or set silent mode. 3.Full screen switch button. B. PTZ Setup
Pan and Tilt Control Up, Down, Left and Right arrows and the home button allow
you to manually drive the camera to the desired position. Zoom Zoom In and
Zoom Out buttons allow for wide or narrow view of the space. Focus Focus In
and Focus Out buttons allow for fine manual focus adjustment if the camera has
any problems auto focusing on the difficult object. PTZ Speeds Pan speed can
be set at any rate between 1 ~ 24, Tilt speed can be set at any rate between 1
~ 20. Zoom and Focus speeds can be set at any rate between 0 ~ 7. PTZ Presets
After manually setting up a shot that you would like to return to later, you
can save presets for quick recall of these positions. Type a
number between 0 and 254 into the Preset box.
Click the “Set” button to save the current location with that preset number.
Click the “Call” button to cause the camera to return to that
position. This enables smooth, quick and convenient control without the need
to manually drive the camera. You can set up preset that user want as below.
Method : Type a number into the Preset box.
Preset: Optional items: 0 ~ 254. PTZ / OSD Dropdown
From the dropdown menu, clicking the OSD option will open the on-screen
display menu of the camera giving you control from within the IP interface. C.
Language Selection
Click either “Chinese”, “English” or “Russian” to change the language of the webpage.
www.fs.com
22
FC730-4K-N USER MANUAL 7.6.2 Video Settings
HDMI/SDI Output
Support HDMI and SDI Output. VideoFormat
Support 50Hz(PAL) and 60Hz(NTSC), and Dial Priority three formats. Encode
Level Support mainprofile and highprofile two levels. Encode Protocol
Support H.264, H.265 and MJPEG three protocols. Resolution First stream
support 3840×2160, 1920×1080, 1280×720, 1024×576, 720×480, 720×408, 640×480,
640×360. Second stream support 720×480, 720×408, 640×480, 640×360, 480×320,
320×240; The bigger resolution is,the clearer the image will be, more
networkbandwidth will be taken. BitRate The user can specify the bit rate.
Generallyspeaking, the larger of thebit rate, the clearerof the image.
However, the configuration of thebit rate needs to be combined with the
networkbandwidth. When the network bandwidth isnarrow and the bit rate is
configuredlarger, thevideo stream cannot be transmitted normally,andthe visual
effect is worse. FrameRate User can specify the size of the frame
rate,generally, the frame rategreater,the imagemore smooth; Frame rate is
smaller,the moresense of beating. I Key Frame Interval Set interval between 2
I frame,the biggerinterval isthe responsewill belower fromviewing window. Bit
Rate Control Code stream control way: ConstantBitRate:Video coder will be
codingaccording to preset speed. VariableBitRate:Video coder will adjust
thespeed based on preset speedto gain the best image quality.
www.fs.com
23
FC730-4K-N USER MANUAL 7.6.3 Image Settings
Brightness
Image bright 0 ~ 14, slider control, on the right shows the corresponding
numerical. Default value is 7. Saturation
Saturation 0 ~ 14, slider control, on the right shows the corresponding
numerical. Default value is 5. Contrast
Contrast 0 ~ 14, slider control, on the right shows the corresponding
numerical. Default value is 7. Sharpness
SharpnessAuto, 0 ~ 15,slider control, on theright shows the corresponding
numerical. Default value is 6. Hue Hue 0 ~ 14, slider control, on the right
shows the corresponding numerical. Default value is 7. Flip & Mirror
Tick Flip to realize image upside down, tick mirror to realize image around
the mirror. Default value is not tick.
7.6.4 Audio Settings
Audio Switch Enable or disable audio switch. Audio Type Optional items: AAC. Sample Rate Optional items: 44.1K, 48K. Bit Rate Optional items: 96K, 128K.
www.fs.com
24
FC730-4K-N USER MANUAL
Input Type Optional items: Line in. Input Vol L The volume of the left
channel. Input Vol R The volume of the right channel. ADTS Options Optional
items: On, Off. 7.6.5 System Settings
Reboot Click the “Reboot” button, system restart. Username and password The
user can modify the password (letters and Numbers only).
www.fs.com
25
FC730-4K-N USER MANUAL 7.6.6 Network Settings
Lan Settings
Default the IP address is 192.168.100.88, the MAC address cannot be modified.
Port Settings
A. HTTP Port
IP address identifies the network device, the device can run multiple web
applications, each network program using network port to transmit data, so
data transmission to be carried out between the port and port. Port setting is
to set up web server program using which port to transmit. When port mapping,
need to be consistent with the port number (default port: 80). B. RTSP Port
The video conference camera support RTSP protocol, use the VLC tools
broadcast, default port: 554. C. PTZ Port
Support TCP connection then control camera, default port: 5678. D. UDP Port
Support UDP protocol, default port: 1259. Control Protocol Settings
Setting the camera control communication protocol, include Visca address,
Pelco-D address and Pelco-P address. RTMP(S) Settings
Setting the MRL of RTMP, select enable or disable video and audio. You can
select control code stream of “On”, “Off”, “Video”, “Audio” between in the two
streams. RTSP Settings
Turn On/Off RTSP auth. ONVIF Settings
www.fs.com
26
FC730-4K-N USER MANUAL
Turn On/Off ONVIF and ONVIF auth. Multicast Settings Turn On/Off multicast.
Setting the multicast address (default value is 224.1.2.3) and port (default
value is 6688, then 6688 is the multicast port of the first stream; 6690 is
the multicast port of the second stream). SDK Settings Turn On/Off active
connection. Setting SDK address (default value is 192.168.100.138) and port
(default value is 1234). NTP Settings Turn On/Off NTP time sync, main time
show and sub time show. Setting NTP server address, time interval, main stream
position and sub stream position.
7.6.7 Device Information
Display the current device information.
7.7 Download the Upgrade Program
If you need the camera upgrade program, please contact the sales.
8.Maintenance and Troubleshooting
Camera Maintains If camera will not be used for a long time, please turn off
power switch, disconnect AC power cord of AC adaptor to the outlet.
Please use soft cloth or tissue to clean the camera cover.
Please use the soft dry cloth to clean the lens. If the camera is very dirty,
clean it with diluted neuter detergent. Do not use any type of
solvents, which may damage the surface. Unqualified Application No shooting
extreme bright object for a long period of time, such as sunlight, light
sources, etc.
No operating in unstable lighting conditions, otherwise image will be
flickering.
No operating close to powerful electromagnetic radiation, such as TV or radio
transmitters, etc. Troubleshooting Image The monitor shows no image 1.Check
that the camera power supply is connected, the voltage is normal, and the
power indicator light is always on. 2.Turn off the power switch to check
whether the camera is self-testing. 3.Check the cable of video platform and TV
whether correct connection. Sometimes without the image Check the cable of
video platform and TV whether correct connection. Image have jitter when the
camera lens at max multiple 1.Check whether the camera installed position be
stabled. 2.Check whether have vibrating machinery or object near the camera.
There is no video image in IE Browser
IE browser does not support H5, you need to use VLC plug-in to view videos.
Please visit VLC website (http://www.videolan.org/vlc)
download and install the 32-bit VLC media player, after it installed, visit
video conference camera will have normal image display. Other
mainstream browsers already support H5 and do not need to install the VLC
plug-in.
Unable to access video conference camera through Browser 1.Using PC to access
the network to test whether the network access can work properly, first of
all, the network fault caused by the PC virus can be eliminated, until the PC
and video conference camera can communicate with each other Ping. 2.Disconnect
the network, connect video conference camera and PC separately, and reset the
IP address of PC. 3.Check IP address, subnet mask, and gateway settings for
video conference camera.
www.fs.com
27
FC730-4K-N USER MANUAL
4.Check whether the MAC address is conflicts. 5.Check whether the web port is
occupied by another device. Forget the IP address or login password Please
remember (The default IP address: 192.168.100.88; default user name: admin;
default password: admin). Control Remote control cannot control 1.Check and
replace the new battery for the remote controller. 2.Check whether the camera
working mode is correct. 3.Check whether the address of remote control can
match the camera. Serial port cannot control 1.Check whether the camera
protocol, address and baud rate such is the same. 2.Check whether the control
line is connected well.
www.fs.com
28
References
- My Dyn Account
- FS.com - HPC, Data Center, Enterprise, Telecom
- Official download of VLC media player, the best Open Source player - VideoLAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>