ELVITA 117666, 117667 Floor Lamp User Manual
- June 3, 2024
- ELVITA
Table of Contents
ELVITA 117666, 117667 Floor Lamp
OVERVIEW
FLOOR LAMP
- Bulb : AC 230 V / GU10 LED MAX 8 W
- Power : AC 230 V / 50 Hz
- Protection class : IP20
Warning:
- Make sure the light is correctly connected to the wall outlet; seek help from a qualified electrician if you do not have the correct wall outlet. Unplug before replacing the bulb.
- Unplug the lamp before opening the cover or replacing the bulb.
- Do not touch the bulb until it has cooled down.
- If in any doubt, consult a qualified electrician.
- This product must only be used indoors.
- Do not install it in a bathroom, laundry room or similar wet room.
DISPOSAL
Domestic users in the EU should dispose of waste equipment as follows. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may harm human health and the environment if not recycled correctly. It is your responsibility to dispose of the product at a designated collection point for recycling of waste electrical and electronic equipment. By recycling correctly you help to to protect human health and prevent these products from harming nature and the environment unnecessarily.
For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product. General maintenance: Use a soft, dry cloth for dusting, and a soft cloth moistened with lukewarm water (<50°C) and a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Do not turn on the lamp until all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is a natural consequence of the manual process, and is what gives mouth-blown glass its character and organic look. Always let mouth-blown glass cool down before cleaning it.