Resideo Cable Sensor Wi-Fi Water Leak Freeze Detector Instructions
- June 5, 2024
- resideo
Table of Contents
Resideo Cable Sensor Wi-Fi Water Leak Freeze Detector
APPLICATION
The optional CHWES4 and RCHWES4 cable sensors for the Wi-Fi Water Leak and Freeze Detector extend the sensing range of the detector. Multiple cable sensors can be connected to each other, up to 500 feet in length.
INSTALLATION
Installing Additional Cable Sensors
-
Insert the plug from the accessory cable sensor into the jack on the water leak detector, as shown in Fig. 1.
Plugging in additional cable sensors. -
For additional cable sensors, plug each new accessory sensor into the end of the previous accessory sensor, then plug in the original cable sensor at the end of the cable.
The detector and cable sensors are all reusable. After an alarm, simply wipe dry the detector and cable sensors and put them back in place. For detector and cable sensor operation, refer to the Resideo app and the literature that came with the detector.
Need help?
- Web: www.resideo.com
- Phone: 1-800-633-3991
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>