Showlite 5x8W Flood Light panel LED RGBW User Manual
- June 5, 2024
- SHOWLITE
Table of Contents
- Showlite 5x8W Flood Light panel LED RGBW
- WEEE declaration
- Introduction
- **Preset programs
- operator guidance chart
- Appendix 1 – DMX512 channel list
- Power connection and DMX
- Preset Programs / parameter settings
- Precautions
- INSTALLATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Showlite 5x8W Flood Light panel LED RGBW
WEEE declaration
Your product is designed and manufactured with materials and components of high quality, which are recyclable and can be reused. The symbol means that your product should be disposed of separately from household waste when it reaches its end of life. Please dispose of this equipment at your local collection point or recycling center. Please help to protect the environment in which we all live. All specifications and appearances are subject to change without notice. All information was correct at the time of printing. Musikhaus Kirstein GmbH does not guarantee the accuracy or completeness of any description, photograph, or statement contained in this manual. Printed colors and specifications may vary slightly from product. Products from Musikhaus Kirstein GmbH are only sold through authorized dealers. Distributors and dealers are not agents of Musikhaus Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH legally in any way. This manual is protected by copyright. Any copying or reprint, even in excerpts, is only allowed with the written consent of Musikhaus Kirstein GmbH. The same applies to the reproduction or copying of images, even in altered form.
Introduction
Thank you for your purchase of the Showlite Flood Light Panel. We hope that you will enjoy the use of the Showlite Flood Light Panel. Please read through this manual carefully before beginning to use, it so that you will be able to take full advantage of the Showlite Flood Light Panel features and enjoy trouble-free operation for years to come. Please keep this manual in a safe and dry place where you easily can access it.
Caution: Before switching on the instrument or device read carefully the safety instructions to avoid serious injuries or damage of the product.
Appendix 3 Technical data
**Preset programs
**
operator guidance chart
Appendix 1 – DMX512 channel list
Channel | Value | Function |
---|---|---|
CH 1 | 0–255 | Master dimmer (0%–100%) |
CH 2 | 0–255 | Red (0%–100%) |
CH 3 | 0–255 | Green (0%–100%) |
CH 4 | 0–255 | Blue (0%–100%) |
CH 5 | 0–255 | White (0%–100%); adjust speed when CH |
6=16~95;
CH 6| 0–255| Adjust Strode when CH 6<16, adjust speed
when CH 6>95;
CH 7| 0-15| Dimmer
16-31| Color mixing plus change 1
32-47| Color mixing plus change 2
48-63| Color mixing plus change 3
64-79 Color mixing plus change 4
80-95 Color mixing plus change 5
96-111 Color sync strobe
112-127 Color fade
128-143 Color sync
144-159 Colors mixing & change then Shutter closing
160-175 down-dimming plus color change
176-191 Up-dimming plus color change
192-207 Color Up-dimming then down-dimming
208-223 Color mix change
224-239 Run sound mode 1
240-255 Run sound mode 2
Power connection and DMX
After saving installation (floor or overhead) please connect the power cable to the net voltage as listed in the technical data. You can operate the lighting device by an external OMX controller or by internal preset programs. If using an OMX controller connect the controller OMX-OUT with the lighting OMX-IN. To connect several lighting effects set up an OMX loop by connecting OMX-OUT of the first device with OMX-IN of the second device and so on.
OMX-connectors and backside operator panel:
Preset Programs / parameter settings
All parameter settings and preset programs can be changed and selected on the backside operator panel . After first power on the display shows A001 – by pressing [ENTER] button, the display shows selected OMX address. By pressing [UP]/[DOWN] you can adjust the address and save with [ENTER] button. Display is showing AXXX ( XXX = selected OMX address). By pressing [UP]/[DOWN] buttons you can select the sub menus AUto, Colo, Soun, SLAv and ver. Select a menu and press [ENTER], display will change to parameter menu where you can change the particular parameter settings by pressing [UP]/[DOWN]. Parameters can be changed and saved by [ENTER] button.
Preset programs:
Select the Mode menu by pressing [UP]/[DOWN] and accept by pressing [ENTER].
The display will change to preset programs to be selected by [UP]/[DOWN]. By
pressing [ENTER] you step into the sub menu where you can adjust specific
preset parameters (color, speed, etc.).
Address | DMX address setting A001 to A512 |
---|---|
Auto | 8 Auto presets – adjustable speed in 9 steps |
sound | 8 Sound presets as Auto but sound controlled |
Colo | 1..9 color mixing presets/ individual RGB color mixing (Alf) |
SLAV | switch devise to SLAVE mode |
ver | the software version is displayed |
Precautions
Please read carefully before proceeding
Warning:
Always follow the basic precautions listed below to avoid the possibility of
serious injury or even death from electrical shock, short-circuiting, damages,
fire or other hazards. These precautions include, but are not limited to, the
following:
Power supply/power cord (devices with power cords/power supplies):
-
Only use the voltage specified as correct for the device. The required voltage is printed on the type plate of the device. Check the power cable from time to time regarding dirt, damage, or other influence.
-
Use only the included power cord/power supply or adaptor. Do not place the power chord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
-
Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. When removing the electric plug from the device or an outlet, always hold the plug itself and not
the cord. Pulling by the cord can damage it. -
To avoid generating unwanted noise, make sure there is an adequate distance (50 cm or more) between the AC power adaptor and the device. Do not cover or wrap the AC power adaptor with a cloth or blanket.
Batteries/safety instructions (devices with batteries):
- Use only high-quality batteries – do not mix batteries with rechargeable accumulators
- Do not try to recharge non-rechargeable batteries
- Keep attention to the polarity when changing the batteries (polarity is signed on the device)
- Do not cause an electrical short at the batteries, do not open the batteries
- Changing of batteries must not be done by children, do not let children play with batteries
- Remove batteries from the device when the device is not in use for a longer period
- Batteries are special waste, do not dispose them with the domestic waste
Location:
- When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product all the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
- Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
- Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
- Do not place the device in an unstable position where it might accidentally fall over.
- Do not block the vents. This device has ventilation holes at the bottom/rear to prevent the internal temperature from becoming too high. In particular, do not place the device on its side or upside down. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
- Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Doing so may result in noise, both in the device itself and in the TV or radio next to it.
Connections and handling:
- Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to a minimum.
- Do not use the device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.
- Do not rest your weight on the device or place heavy objects on it, and avoid using excessive force on the buttons, switches, or connectors
Do not open:
- Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified service personnel.
Water warning:
- Do not expose the device to rain, use it near water or in damp or wet conditions on it containing liquids that might spill into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
- If the power cord or plug becomes frayed or damaged, if there is a sudden loss of sound during the use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified service personnel.
INSTALLATION
The Showlite Flood Light Panel is designed as a floor effect or for overhead rigging on stages, in discotheques, theatres, etc. During installation consider all necessary safety instructions especially EN 60598-2-17 and national standards. Please note: for overhead rigging in public or industrial areas, a series of safety instructions have to be considered. This manual can only give a survey and does not list complete instructions. Installation must only be done by authorized and experienced operators.
Overhead rigging
Important: Overhead rigging must only be done by authorized and experienced operators. Always install an appropriate safety bond. You must only use safety bonds and quick links complying with DIN 56927, shackles complying with DIN EN 1677-1, and BGV C1 carbines. All devices must be sufficiently dimensioned and used correctly in accordance with the latest industrial safety regulations. The installation of the device has o be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harmful deformation. The maximum drop distance must never exceed 20 cm. A safety bond that already held the strain of a crash or which is defective must not be used again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>