Shenzhen Bab Smart Technology ZQGB6882 Smart Thermostat User Guide

Bab Smart Technology ZQGB6882 Smart Thermostat
**User Guide

**

For Water Heating/Boiler/Electric Heating

WELCOME

Thank you for your purchase
Your new thermostat will provide uniform and comfortable temperature control throughout every room in your property. We bring together technology raftsmanship and the highest quality materials to provide you with a safe reliable product combined with sleek contemporary design. Please read this installation/programming manual for comprehensive instructions on installing and operating your thermostat. Please also ensure a suitably qualified person installs your thermostat and complies with all local regulations 

IN THE BOX YOU WILL FIND

Thermostat…………..1 pc
User Guide………………..1pc
Floor sensor…………………….1pc
Screws…………………….2 pcs
QC Passed………………………..1 pc

ABOUT YOUR THERMOSTATS

The HC-020-WIF] series range has been developed to control electric underfloor, water heating or water/gas boiler systems. These units are designed for use in commercial, industrial, civil, and domestic properties.

FEATURES

On Appearance

1. The convenient operation creates convenient life.
2. Fashion design blends in with any decor
3. Touch Screen display with backlight is easy to read, even in the dark.
4. Bright buttons always remind you the world truly exists.
5. Easy UI interface could be used even by children.
6. Optional of black and white housing.

On Functionality

1.  Remote control by Tuya App
2. 0.5C Accuracy keeps the temperature within the level you set
3. Data memory when power is off
4. 5+2six periods programmable maximize comfort and economy.
5. Create a thermostat group to Centralized control
6. Integrated with Amazon Alexa, Google Assistant, etc.
7. All setting languages synchronize your time zone, address and language.
8. No limit to adding rooms and supporting Smart Scene.

MODEL DEFINITION

GA: Water heating, 5A
GC: Water/Gas Boiler, SA
P·Weekly Programmable
GB: Electric floor Heating, 16A
L: Backlight
WWI-Fi
52: Both internal sensor and floor external sensor
For example HC-TO20-WIFLGC

DIMENSION 

TECHNICAL DATA

Power Supply 95 240V AC, 50 60HZ
Current Load: SA (water heating/water boiler/gas boiler), 16A (electric heating)
Sensor: NTC
Accuracy: +0.5 C or +1 F
Set Temp. Range: 535 €
Display Temp. Range: 599 €
Ambient Temp.:0 45 C
Ambient Humidity: 5 95 % RH (Non-Condensing)
Storage Temp.:-545 C
Power Consumption: <1.5W
Timing Error <1%
Shell Material: PC +ABS ( flame retardant)
Protection Class: IP 20
Buttons: Capacitive Touch Buttons

BEFORE WIRING AND INSTALLING

1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.

CAUTION: Electrical Shock or Equipment Damage Hazard. Can shock individuals or short equipment circuitry. Disconnect power supply before installation.

WIRING

Note
GA is for water heating;
GB is for electric heating;
GC is for water/gas boiler;
NTC is optional.

INSTALLATION

Your thermostat is suitable for installation within a standard 86mm pattress box or Europen 60mm patters Box.

1. Keep power off Remove the mounting plate by rotating the LCD part

2. Refer to the Wiring “to load into the appropriate terminals

3. Fix the mounting plate into the wall with screws in the box.

4. Fasten the body of the thermostat and the mounting plate by rotating, the installation is complete. 

HOME SCREEN QUICK REFERENCE  OPERATION

1. Power On/off: Press” ‘” to turn the thermostat on/off.

2. Mode switch among “Manual/Programmable/Eco
   Touch” M “(mode) to change among “Manual/Programmable/ECO” In the manual mode,”& will display on the bottom of the screen; In programmable mode,” ” will display at the bottom of the screen; In ECO mode, “ ” will display on the right side

3. Setting Temperature
   In the mode of ECO and programmable, set temperature, and time could not be adjusted. If the user wants to change, please go to manual mode. In the mode manual, press” ” and” ” to set the desired temperature. When the thermostat is turned on, press and hold “ ****“for 5 seconds to switch
   the temperature mode, Celsius (°C) or Fahrenheit ( °F),

4. Adjusting/Setting the Time
   Touch the icon” ” to set the minute, hour, and weekday by using” ” and” ”  Press” ” once more to confirm and exit.

5. Press and hold” ” and” ” for 5 seconds to lock/unlock your thermostat.

6. Adjusting/setting the Program Schedules
   When a Wi-Fi connection is made, your thermostat will automatically accept the program schedule made via the APP on your device (see below for detailed instructions). To set the program schedules through your thermostat (NOT via your smartphone/tablet) simply follow the instructions below:
   Note: In any of the Manual/Programmable/ECO” modes, the touch “ “key can enter the setting of the program schedule. Touch “ ” key 4 times to enter the programming setting (The first three times are set to the current time and week).
   Use” ” and” ”  to adjust each value, and then press “ ” to switch between 1-6 Periods, time, and temperature.
   After finishing the above settings, press “ ” to exit the programming mode.
   The default setting for the program schedule****

Period| Working days
(Monday to Friday)| Saturday| Sunday
---|---|---|---
Time| Temp.| Time| Temp.| Time| Temp.
Period 1| 06:00| 20 °C| 06:00| 20 °C| 06:00| 20 °C
Period 2| 08:00| 15 °C| 08:00| 20 °C| 08:00| 20 °C
Period 3| 11:30| 15 °C| 11:30| 20 °C| 11:30| 20 °C
Period 4| 13:30| 15 °C| 13:30| 20 °C| 13:30| 20 °C
Period 5| 17:00| 22 °C| 17:00| 20 °C| 17:00| 20 °C
Period 6| 22:00| 15 °C| 22:00| 15 °C| 22:00| 15 °C
7. Checking the Temperature of Floor Sensor
Press and hold the arrow for 5 seconds to display the temperature of the floor sensor.

8. Setting the Advanced Features
   Turn off the thermostat, press the” M ” and” **” buttons at the same time for 5 seconds to enter the advanced features setting press the” M ” button For function selection,  press” **” and” **”  to adjust individual functions.
   All high-level option settings will take effect automatically after restarting the thermostat Code| Function| Setting and options| Default
   ---|---|---|---
   1| Temperature Compensation| -9 °C to +9 °C (for internal sensor)| -1
   2| Temperature Deadzone| 1 °C – 5 °C| 1
   3| Button Locking| 00: All buttons are locked except the power button. 01: All buttons are locked.| 01
   4| Sensor Types| In: Internal Sensor ( to control or limit the temp. ) Ou: Only external sensor AL: Internal/ External Sensor (Internal sensor to control the temp., external sensor to limit the temp.)| AL
   5| Min. Set Temp.| 5 °C — 15 °C| 05
   6| Max. Set Temp.| 15 °C — 45 °C| 35
   7| Display Mode| 00: Display both set temp. and room temp. 01: Display set temp. only| 00
   8| Low-Temperature Protection Setting| 0 °C – 10 °C| 00
   9| High Temperature
   Protection Setting| 25 °C,…, 70 °C| 45
   A| Economy Mode| 00: Non-energy saving mode 01: Energy saving mode| 0
   B| Economy Temperature Range| 0 °C “s 30 °C**| 20

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received
   -ved, including interference that may cause undesired operation. Any changes or modifications do not expire
   -srsly approved by the party responsible for compliance could void the user’s authority to operate the equi
   -pment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, p
-pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against h
-armful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions may cause harmful interfere
-rence to radio communications. However, there is no guarantee that interference will not occur in a party
-color installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
-d by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
  — Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  — Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator and your body:  Use only the supplied antenna.

WIFI CONNECTION

Step l: Download your APP
There are two APPs to choose from, the wifi connection takes “ Tuya Smart “as an example. Scan the QR code to download the ” Tuya Smart” App, or you can also search the keyword “Tuya Smart ” at App Store or Google Play to download App.

|
---|---
https://smartapp.tuya.com/tuyasmart| https://smartapp.tuya.com/smartlife

Step:3 Wi-Fi connection operation

Note: The thermostat support two paring modes, you can choose according to the actual situation.
E pairing mode: EZ mode allows for rapid networking, with high-performance requirements for WIF signal strength, routers, mobile phones, or management devices, as shown below.
After turning off the thermostat, press and hold the ****button for 10 seconds, when the icon fast flashes, that stands for the device enter into pairing mode Then open the “Tuya” app,  click “Add advice” to add a device, and choose “Small Home Appliance”, select “Thermostat (Wi-Fi)” (when you open Bluetooth on your smartphone, the thermostat will be detected automatically (figure 6)) choose the suitable WiFi network and enter the password, click”next” to enter automat­ ic connection state, complete the Wi-Fi connection of the thermostat.

AP pairing mode: AP mode compatibility is good, Wi-Fi signal strength, router, mobile phone or management equipment performance requirements are low, the operation is shown below.
After turning off the thermostat, press and hold the” ” button for 10 seconds, when the  icon fast flash, press and hold the “ button for another 10 seconds, the
‘ · icon appears, that stands for the thermostat to enter into AP pairing mode.
Open the “Tuya” app, click “Add Device” to add a device, choose “Small Home Appliance”, select “Thermostat (Wi-Fi)”, choose the suitable Wi-Fi network and enter the password, click “next”, filter “Confirm the indicator is blinking slowly”, click “Next”, then click “Go to Connect”, your phone will automatically enter Wi-Fi settings interface, choose the Wi-Fi signal ”SmartLife-ooo”, then reopen “Tuya” app to enter an automatic connection state, complete the Wi-Fi connec­ notion of the thermostat.

PROGRAMMING YOUR THERMOSTAT

After a successful connection, it will enter the thermostat setting interface, as shown in Figure 13. You can make relevant settings according to your needs

1. Power on/off. press it, and turn on the device. Press it again, and turn off the device.
2. Mode switch button, press it to switch mode among “Manual/Programmable/ECO”
3. T1ming On/Off.
4. Advanced features.
5. Slide the orange button backward or forward to manually adjust the temperature, the temperature will show in the center.
6. Settings.
   

Week program
You can set it on weekdays (Monday to Friday), and then set the time /tempera­ ture and adjust it according to your work schedule
You can set 6 periods (time and temperature), as shown in Figure 15.
Repeat the above steps to set Saturday-Sunday.
Once your schedule has been set, click save and the application will transfer the programmed data to the thermostat and the plan has been saved.
Child lock
Turn on this function, the thermostat buttons are locked and cannot be operated.
ECO mode
The ECO mode is disabled by default, if the user wants to use this function, please go to advanced features to enable it. Then touch the “AM” key on the thermostat to switch among “Manual/Programmable/ECO” modes.
In Figure 13, click the ” icon to enter the Advanced feature’s interface. As shown in Figure 16.
You can change the device information, as shown in Figure 17; Add third-party control, such as Amazon Echo or Google Home, as shown in Figure 18; Share the device, as shown in Figures 19, and 20; create a group, as shown in Figure 21.

SIMPLE EXCEPTION HANDLING

and Power Unit Box is loosen.
2| Without output but display works.| Use a new LCD panel or new Power
Unit Box to replace the old one.
3| Room Temp. is a litte different from the actual.| Do temperature calibration in item 1 of Advanced Features
4| “E2” is displayed on the Tuya App operation interface| Enter the advanced function and set the “Sensor Type” to “Internal Sensor”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>