SOCCERBEE UbeesLab POD Lite User Manual
- June 5, 2024
- SOCCERBEE
Table of Contents
SOCCERBEE UbeesLab POD Lite Package
- SOCCERBEE POD Lite
- Mini USB Cable
Features
- Multifunction Button
- Mini USB Port
- Multifunction LED
Technical Specification
- Product Name : SOCCERBEE POD Lite
- Operating Temperature : -20 ~ +50 °C
- Battery : 360mAh, Lithium-Polymer, 3.7V
- Input (charging): 5V mini USB
Hardware Functions
- Power On : Press and hold the button for 2sec to turn on
- Power Off : Press and hold the button for 3sec to turn off
LED Indicators
-
Signal Searching : Blue blink every 1 sec
-
Data Logging : Green blink every 1 sec
-
Data Transferring : Green blink every 3 sec
-
Battery Charging : Red dimming every 3 sec
-
Battery Charging Done : Green continues
-
Battery Charging needed : Red blink 3 times
Operration Frequency -
GPS 1575.42MHz±1.023MHz, GLONASS 1598.0625~1605.375MHz
-
Bluetooth : 2402~2480mhZ
Modulation Type -
GPS: BPSK
-
Bluetooth: GFSK
Max taget power
How To Use
-
Pair SOCCERBEE POD Lite with your phone
Open the SOCCERBEE app and create your account. Use the app to search for your POD. When the app finds yours (check the serial number), press the button on the app to complete the pairing process. -
Data Logging
Turn on the POD and put it in the vest before the game starts. -
Data transferring & analysis
After the game, start analyzing the process with the app. Press data transfer button on the app and wait until the transferring process is completed. Enter specific information about your game and start analyzing. -
Charge your pod
Connect the device to the mini USB port. A full charge will typically provide 10 hours of logging.
TIPS & WARNING
- GPS can only be activated with a clear view of the sky.
- We highly recommend you not to put SOCCERBEE POD Lite heading to blocked directions.
- Do not expose your POD to extremely hot or cold circumstances.
- Do not attempt to force open the device. It may damages human health if handled and disposed of improperly.
- SOCCERBEE POD Lite is NOT waterproof.
FCC Instructions
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may causundesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>