DEWALT DCD800 Brushless Cordless 1 2 in. Drill Driver Kit Instruction Manual
- June 5, 2024
- Dewalt
Table of Contents
- Technical Data
- GENERAL POWER TOOL SAFETY WARNINGS
- Additional Specific Safety Rules for Drills/ Drivers/Impact Drills
- Residual Risks
- Chargers
- Charger Operation
- Wall Mounting
- Battery Packs
- Package Contents
- Markings on Tool
- Description (Fig. A)
- ASSEMBLY AND ADJUSTMENTS
- Belt Hook and Magnetic Bit Holder (Fig. A)
- Variable Speed Trigger Switch (Fig. A)
- Forward/Reverse Control Button (Fig. A)
- Torque Adjustment Collar (Fig. A)
- Dual Range Gearing (Fig. A)
- Pivoting LED Work light (Fig. A, E)
- Keyless Single Sleeve Chuck (Fig. C)
- OPERATION
- MAINTENANCE
- Optional Accessories
- Protecting the Environment
- Rechargeable Battery Pack
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DEWALT DCD800 Brushless Cordless 1 2 in. Drill Driver Kit Instruction Manual
  
DRILL DCD800 DRILL/HAMMERDRILL DCD805
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable partners for
professional power tool users.
Technical Data
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841 and may
be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission level represents
the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration
and/or noise emission may differ. This may significantly increase the exposure
level over the total working period. An estimation of the level of exposure to
vibration and/ or noise should also take into account the times when the tool
is switched off or when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects
of vibration and/or noise such as: maintain the tool and the accessories, keep
the hands warm (relevant for vibration), organisation of work patterns.
EC Declaration of Conformity
Machinery Directive
Drill/Impact Drill DCD800, DCD805
DEWALT declares that these products described under Technical Data are in
compliance with: 2006/42/EC, EN628411:2015, EN6284121:2018+A11:2019. These
products also comply with Directive 2014/30/EU and 2011/65/EU. For more
information, please contact DEWALT at the following address or refer to the
back of the manual. The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of DEWALT.
Markus Rompel VicePresident Engineering, PTE-Europe DEWALT, RichardKlingerStraße 11, 65510, Idstein, Germany 30.10.2021
Date code 201811475B or later
Date code 201536 or later
Battery charge times matrix provided for guidance only; charge times will
vary depending on temperature and condition of batteries.
DECLARATION OF CONFORMITY THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
DRILL/IMPACT DRILL DCD800, DCD805
DEWALT declares that these products described under Technical Data are in
compliance with: The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN628411:2015, EN6284121:2018+A11:2019. These products
conform to the following UK Regulations: Electromagnetic Compatibility
Regulations, 2016, S.I.2016/1091 (as amended). The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012, S.I. 2012/3032 (as amended). For more information, please
contact DEWALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes
this declaration on behalf of DEWALT.
Karl Evans
Vice President Professional Power Tools EANZ GTS
DeWALT UK, 270 Bath Road, Slough
SL1 4DX
England
30.10.2021
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mainsoperated (corded)
power tool or batteryoperated (cordless) power tool.
-
Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b ) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. -
Electrical Safety
a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. -
Personal Safety
a ) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
c ) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d ) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e ) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f ) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g ) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards.
h ) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. -
Power Tool Use and Care
a ) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c ) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d ) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f ) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h ) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. -
Battery Tool Use and Care
a ) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b ) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c ) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d ) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e ) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f ) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
g ) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire. -
Service
a ) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b ) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Additional Specific Safety Rules for Drills/ Drivers/Impact Drills
- Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
- Use the auxiliary handles, if supplied with the tool. Loss of control can cause personal injury.
- Brace the tool properly before use. This tool produces a high output torque and without properly bracing the tool during operation, loss of control may occur resulting in personal injury.
- Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Safety Instructions When Using Long Drill Bits
- Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
- Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
- Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.
- Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
- Wear ear protectors when hammering for extended periods of time. Prolonged exposure to high intensity noise can cause hearing loss. Temporary hearing loss or serious ear drum damage may result from high sound levels generated by hammer drilling.
- Wear safety goggles or other eye protection. Hammering and drilling operations cause chips to fly. Flying particles can cause permanent eye damage.
- Hammer bits and tools get hot during operation. Wear gloves when touching them.
- Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
- Air vents often cover moving parts and should be avoided. Loose clothes, jewellery or long hair can be caught in moving parts.
Residual Risks
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:
- Impairment of hearing.
- Risk of personal injury due to flying particles.
- Risk of burns due to accessories becoming hot during operation.
- Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Chargers
DEWALT chargers require no adjustment and are designed to be as easy as
possible to operate.
Electrical Safety
The electric motor has been designed for one voltage only. Always check that
the battery pack voltage corresponds to the voltage on the rating plate. Also
make sure that the voltage of your charger corresponds to that of your mains.
Your DEWAL Tcharger is double insulated in accordance with EN60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced only by DEWALT or an
authorised service organisation.
Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted:
- Safely dispose of the old plug.
- Connect the brown lead to the live terminal in the plug.
- Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended
fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an
approved extension cable suitable for the power input of your charger (see
Technical Data). The minimum conductor size is 1 mm2; the maximum length is 30
m.
When using a cable reel, always unwind the cable completely.
Important Safety Instructions for All Battery Chargers SAVE THESE
INSTRUCTIONS: This manual contains important safety and operating
instructions for compatible battery chargers (refer to Technical Data).
- Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.
WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
CAUTION: Burn hazard. To reduce the risk of injury,
charge only DEWALT rechargeable batteries. Other types of batteries may burst
causing personal injury and damage.
CAUTION: Children should be supervised to ensure that they do not play
with the appliance.
NOTICE: Under certain conditions, with the charger plugged into the power
supply, the exposed charging contacts inside the charger can be shorted by
foreign material. Foreign materials of a conductive nature such as, but not
limited to, steel wool, aluminum foil or any build-up of metallic particles
should be kept away from charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity. Unplug charger
before attempting to clean.
- DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.
- These chargers are not intended for any uses other than charging DEWALT rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.
- Do not expose charger to rain or snow.
- Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.
- Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
- Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.
- Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
- Do not operate charger with damaged cord or plug– have them replaced immediately.
- Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorised service centre.
- Do not disassemble charger; take it to an authorised service centre when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
- In case of damaged power supply cord, the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard.
- Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
- NEVER attempt to connect two chargers together.
- The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger.
Charging a Battery (Fig. B)
- Plug the charger into an appropriate outlet before inserting battery pack.
- Insert the battery pack 11 into the charger, making sure the battery pack is fully seated in the charger. The red (charging) light will blink repeatedly indicating that the charging process has started.
- The completion of charge will be indicated by the red light remaining ON continuously. The battery pack is fully charged and may be used at this time or left in the charger. To remove the battery pack from the charger, push the battery release button 12 on the battery pack.
NOTE: To ensure maximum performance and life of lithium ion battery packs, charge the battery pack fully before first use.
Charger Operation
Refer to the indicators below for the charge status of the battery pack.
*The red light will continue to blink, but a yellow indicator light will be illuminated during this operation. Once the battery pack
has reached an appropriate temperature, the yellow light will turn off and the
charger will resume the charging procedure.
The compatible charger(s) will not charge a faulty battery pack. The charger
will indicate faulty battery by refusing to light.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to be
tested at an authorised service centre.
Hot/Cold Pack Delay
When the charger detects a battery pack that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until the
battery pack has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures maximum
battery pack life.
A cold battery pack will charge at a slower rate than a warm battery pack. The
battery pack will charge at that slower rate throughout the entire charging
cycle and will not return to maximum charge rate even if the battery pack
warms.
The DCB118 charger is equipped with an internal fan designed to cool the
battery pack. The fan will turn on automatically when the battery pack needs
to be cooled. Never operate the charger if the fan does not operate properly
or if ventilation slots are blocked. Do not permit foreign objects to enter
the interior of the charger.
Electronic Protection system
XR LiIon tools are designed with an Electronic Protection System that will
protect the battery pack against overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the lithiumion battery pack on the charger
until it is fully charged.
Wall Mounting
These chargers are designed to be wall mountable or to sit upright on a table
or work surface. If wall mounting, locate the charger within reach of an
electrical outlet, and away from a corner or other obstructions which may
impede air flow. Use the back of the charger as a template for the location of
the mounting screws on the wall. Mount the charger securely using drywall
screws (purchased separately) at least 25.4 mm long with a screw head diameter
of 79 mm, screwed into wood to an optimal depth leaving approximately 5.5 mm
of the screw exposed. Align the slots on the back of the charger with the
exposed screws and fully engage them in the slots.
Charger Cleaning Instructions
WARNING: Shock hazard. Disconnect the charger from the AC outlet before
cleaning. Dirt and grease may be removed from the exterior of the charger
using a cloth or soft non-metallic brush. Do not use water or any cleaning
solutions. Never let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Battery Packs
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalogue number
and voltage.
The battery pack is not fully charged out of the carton. Before using the
battery pack and charger, read the safety instructions below. Then follow
charging procedures outlined.
READ ALL INSTRUCTIONS
- Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.
- Never force battery pack into charger. Do not modify battery pack in any way to fit into a noncompatible charger as battery pack may rupture causing serious personal injury.
- Charge the battery packs only in DEWALT chargers.
- DO NOT splash or immerse in water or other liquids.
- Do not store or use the tool and battery pack in locations where the temperature may fall below 4 °C (39.2 °F) (such as outside sheds or metal buildings in winter), or reach or exceed 40 °C (104 °F) (such as outside sheds or metal buildings in summer).
- Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.
- If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
- Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.
WARNING: Burn hazard. Battery liquid may be
flammable if exposed to spark or flame.
WARNING: Never attempt to open the battery pack for
any reason. If battery pack case is cracked or damaged, do not insert into
charger. Do not crush, drop or damage battery pack. Do not use a battery pack
or charger that has received a sharp blow, been dropped, run over or damaged
in any way (i.e., pierced with a nail, hit with a hammer, stepped on).
Electric shock or electrocution may result. Damaged battery packs should be
returned to
service centre for recycling.
WARNING: Fire hazard. Do not store or carry the battery pack so that
metal objects can contact exposed battery terminals. For example, do not place
the battery pack in aprons, pockets, tool boxes, product kit boxes, drawers,
etc., with loose nails, screws, keys, etc.
CAUTION: When not in use, place tool on its side on a stable surface
where it will not cause a tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack but may be easily knocked
over.
Transportation
WARNING: Fire hazard. Transporting batteries can possibly cause fire if
the battery terminals inadvertently come in contact with conductive materials.
When transporting batteries, make sure that the battery terminals are
protected and well insulated from materials that could contact them and cause
a short circuit. NOTE: Lithiumion batteries should not be put in checked
baggage.
DEWALT batteries comply with all applicable shipping regulations as prescribed
by industry and legal standards which include UN Recommendations on the
Transport of Dangerous Goods; International Air Transport Association (IATA)
Dangerous Goods Regulations, International Maritime Dangerous Goods (IMDG)
Regulations, and the European Agreement Concerning The International Carriage
of Dangerous Goods by Road (ADR). Lithiumion cells and batteries have been
tested to section 38.3 of the UN Recommendations on the Transport of Dangerous
Goods Manual of Tests and Criteria.
In most instances, shipping a DEWALT battery pack will be excepted from being
classified as a fully regulated Class 9 Hazardous Material. In general, only
shipments containing a lithiumion battery with an energy rating greater than
100 Watt Hours (Wh) will require being shipped as fully regulated Class 9. All
lithiumion batteries have the Watt Hour rating marked on the pack.
Furthermore, due to regulation complexities, DEWALT does not recommend air
shipping lithiumion battery packs alone regardless of Watt Hour rating.
Shipments of tools with batteries (combo kits) can be air shipped as excepted
if the Watt Hour rating of the battery pack is no greater than 100 Wh.
Regardless of whether a shipment is considered excepted or fully regulated, it
is the shipper’s responsibility to consult the latest regulations for
packaging, labeling/marking and documentation requirements.
The information provided in this section of the manual is provided in good
faith and believed to be accurate at the time the document was created.
However, no warranty, expressed or implied, is given. It is the buyer’s
responsibility to ensure that its activities comply with the applicable
regulations.
Transporting the FLEXVOLT™ Battery
The DEWALT FLEXVOLTTM battery has two modes: Use and Transport.
Use Mode: When the FLEXVOLTTM battery stands alone or is in a DEWALT 18V
product, it will operate as an 18V battery. When the FLEXVOLTTM battery is in
a 54V or a 108V (two 54V batteries) product, it will operate as a 54V battery.
Transport Mode: When the cap is attached to the FLEXVOLTTM battery, the
battery is in Transport mode. Keep the cap for shipping.
When in Transport mode, strings of cells are electrically disconnected within
the pack resulting in 3 batteries with a lower Watt hour (Wh) rating as
compared to 1 battery with a higher Watt hour rating. This increased quantity
of 3 batteries with the lower Watt hour rating can exempt the pack from
certain shipping regulations that are imposed upon the higher Watt hour
batteries. For example, the Transport Example of Use and Transport Label
Marking Wh rating might indicate 3 x 36 Wh, meaning 3 batteries of 36 Wh each.
The Use Wh rating might indicate 108 Wh (1 battery implied). Storage
Recommendations 1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum battery performance
and life, store battery packs at room temperature when not in use. 2. For long
storage, it is recommended to store a fully charged battery pack in a cool,
dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge.
The battery pack will need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger
and the battery pack may show the following pictographs:
Battery Type
The following tools operate on a 18 volt battery pack: DCD800, DCD805 These
battery packs may be used: DCB181, DCB182, DCB183, DCB183B, DCB183G, DCB184,
DCB184B, DCB184G, DCB185, DCB187, DCB189, DCBP034, DCB546, DCB547, DCB548,
DCB549. Refer to Technical Data for more information.
Package Contents
The package contains:
-
1 Drill/driver or 1 drill/driver/hammerdrill
-
1 Charger
-
1 Kitbox
-
1 LiIon battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1
models) -
2 LiIon battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, Y2
models) -
3 LiIon battery packs (C3, D3, E3, M3, P3, S3, T3, X3, Y3 models)
-
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included with N
models. Battery packs and chargers are not included with NT models. B models
include Bluetooth® battery packs.
NOTE: The Bluetooth® word mark and logos are registered trademarks owned by
the Bluetooth®, SIG, Inc. and any use of such marks by DEWALT is under
license. Other trademarks and trade names are those of their respective
owners. · Check for damage to the tool, parts or accessories which may
have occurred during transport. · Take the time to thoroughly read and
understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Date Code Position (Fig. B)
The date code 14 , which also includes the year of manufacture, is printed
into the housing. Example:
2021 XX XX Year and Week of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
- Trigger switch
- Forward/reverse control button
- Torque adjustment collar
- Gear shifter
- Worklight
- Keyless chuck
- Chuck sleeve
- Belt hook
- Mounting screw
- Bit holder
- Battery pack
- Battery release button
- Work light switch
Intended Use
These drills/drivers/hammer drills are designed for professional drilling,
percussion drilling and screwdriving applications.
DO NOT use under wet conditions or in the presence of flammable liquids
or gases. These drills/drivers/hammer drills are professional power tools.
DO NOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
- Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision.
- This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/ installing
attachments or accessories. An accidental start up can cause injury.
WARNING: Use only DEWALT battery packs and chargers.
Inserting and Removing the Battery Pack from the Tool (Fig. B)
NOTE: Make sure your battery pack 11 is fully charged.
To Install the Battery Pack into the Tool Handle
- Align the battery pack with the rails inside the tool’s handle (Fig. B).
- Slide it into the handle until the battery pack is firmly seated in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
- Press the battery release button 12 and firmly pull the battery pack out of the tool handle.
- Insert battery pack into the charger as described in the charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some DEWALT battery packs include a fuel gauge which consists of three green
LED lights that indicate the level of charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button 15 . A
combination of the three green LED lights will illuminate designating the
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need to
be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the battery
pack. It does not indicate tool functionality and is subject to variation
based on product components, temperature and enduser application.
Belt Hook and Magnetic Bit Holder (Fig. A)
Optional Accessories
WARNING: To reduce the risk of serious personal injury, ONLY use the
tool’s belt hook to hang the tool from a work belt. DO NOT use the belt hook
for tethering or securing the tool to a person or object during use. DO NOT
suspend tool overhead or suspend objects from the belt hook.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook is secure.
CAUTION: To reduce the risk of personal injury or damage, DO NOT use the
belt hook to hang the drill while using as a spotlight.
IMPORTANT: When attaching or replacing the belt hook 8 or magnetic bit
holder 10 , use only the mounting screw 9 that is provided. Be sure to
securely tighten the screw.
The belt hook and magnetic bit holder can be be attached to either side of the
tool using only the screw provided, to accommodate left or right handed users.
If the hook or magnetic bit holder is not desired at all, it can be removed
from the tool.
To move belt hook or bit clip, remove the screw that holds it in place then
reassemble on the opposite side. Be sure to securely tighten the screw.
Variable Speed Trigger Switch (Fig. A)
To turn the tool on, squeeze the variable speed trigger switch 1 . To turn the
tool off, release the trigger switch. Your tool is equipped with a brake. The
chuck will stop as soon as the trigger switch is fully released.
NOTE: Continuous use in variable speed range is not recommended. It may
damage the switch and should be avoided.
Forward/Reverse Control Button (Fig. A)
A forward/reverse control button 2 determines the direction of the tool and
also serves as a lockoff button. To select forward rotation, release the
trigger switch and depress the forward/reverse control button on the right
side of the tool. To select reverse, release the trigger switch and depress
the forward/reverse control button on the left side of the tool. The centre
position of the control button locks the tool in the off position. When
changing the position of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of
rotation, you may hear a click on start up. This is normal and does not
indicate a problem.
Torque Adjustment Collar (Fig. A)
Your tool has an adjustable torque screwdriver mechanism for driving and removing a wide array of fastener shapes and sizes and in some models, a hammer mechanism for drilling into masonry. Circling the torque adjustment collar 3 are numbers, a drill bit symbol, and on some models, a hammer symbol. These numbers are used to set the clutch to deliver a torque range. The higher the number on the collar, the higher the torque and the larger the fastener which can be driven. To select any of the numbers, rotate until the desired number aligns with the arrow.
Dual Range Gearing (Fig. A)
The dual range feature of your drill/driver allows you to shift gears for
greater versatility.
1. To select speed 1 (high torque setting), turn the tool off and permit it
to stop. Slide the gear shifter 4 forward (towards the chuck).
2. To select speed 2 (low torque setting), turn the tool off and permit it to
stop. Slide the gear shifter back (away from the chuck).
NOTE: Do not change gears when the tool is running. Always allow the
drill to come to a complete stop before changing gears. If you are having
trouble changing gears, make sure that the dual range gear shifter is either
completely pushed forward or completely pushed back.
Pivoting LED Work light (Fig. A, E)
CAUTION: Do not stare into work light. Serious eye injury could result.
The work light 5 located on the foot of the tool is activated when the trigger
switch is depressed and is adjustable via three detent positions. The off 17 ,
on 18 , and spotlight 19 modes
can be changed by moving the worklight switch 13 on the foot of tool. In the
on setting, the worklight will stay illuminated for up to 20 seconds. If the
trigger switch remains depressed, the worklight will remain on.
NOTE: The worklight is for lighting the immediate work surface and are
not intended to be used as a flashlight.
Spotlight Mode
The spotlight will run for 20 minutes after the trigger switch is released.
Two minutes before the spotlight will shut off, it will flash twice and then
dim. To avoid the spotlight shutting off,
lightly tap the trigger switch.
WARNING: While using the worklight in medium or spotlight mode, do not
stare at the light or place the drill in a position which may cause anyone to
stare into the light. Serious eye injury could result.
CAUTION: When using the tool as a spotlight, be sure it is secured on a
stable surface where it will not cause a tripping or falling hazard.
CAUTION: Remove all accessories from the chuck before using the drill as
a spotlight. Personal injury or property damage could result.
Low Battery Warning
When in spotlight mode and the battery is nearing complete discharge, the
spotlight will flash twice and then dim. After two minutes, the battery will
be completely discharged and the drill will immediately shut down. At this
point, replace with a
fresh battery.
WARNING: To reduce the risk of injury, always have a backup battery or
secondary lighting available if the situation warrants it.
Keyless Single Sleeve Chuck (Fig. C)
WARNING: Do not attempt to tighten drill bits (or any other accessory) by
gripping the front part of the chuck and turning the tool on. Damage to the
chuck and personal injury may result. Always lock off trigger switch and
remove the battery from the tool when
changing accessories.
WARNING: Always ensure the bit is secure before starting the tool. A
loose bit may eject from tool causing possible personal injury.
Your tool features a keyless chuck 6 with one rotating chuck sleeve 7 for
onehanded operation of the chuck. To insert a drill bit or other accessory,
follow these steps.
- Turn tool off and remove the battery pack.
- Grasp the black sleeve of the chuck with one hand and use the other hand to secure the tool. Rotate the sleeve anticlockwise (as viewed from the front) far enough to accept the desired accessory.
- Insert the accessory about 19 mm into the chuck and tighten securely by rotating the chuck sleeve clockwise with one hand while holding the tool with the other hand. Continue to rotate the chuck sleeve until several ratchet clicks are heard to ensure full gripping power.
NOTE: Be sure to tighten chuck with one hand on the chuck sleeve and one
hand holding the tool for maximum tightness.
To release the accessory, repeat steps 1 and 2 above.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and applicable
regulations.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack before making any
adjustments or removing/ installing attachments or accessories. An accidental
start-up can cause injury.
Proper Hand Position (Fig. D)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold
securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle 16 and one hand on
the battery pack.
Drill Operation (Fig. A, D)
****WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, ALWAYS ensure workpiece
is anchored or clamped firmly. If drilling thin material, use a wood “backup”
block to prevent damage to the material.
-
Turn the collar 3 to the drill symbol.
-
Select the desired speed/torque range using the gear shifter 4 to match the speed and torque to the planned operation.
-
For Wood, use twist bits, spade bits, power auger bits or hole saws. For Metal, use highspeed steel twist drill bits or hole saws. Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry.
-
Always apply pressure in a straight line with the bit. Use enough pressure to keep drill biting, but do not push hard enough to stall the motor or deflect the bit.
-
Hold tool firmly with both hands to control the twisting action of the drill. If model is not equipped with side handle, grip drill with one hand on the handle and one hand on the
battery pack.
****CAUTION: Drill may stall if overloaded causing a sudden twist. Always expect the stall. Grip the drill firmly to control the twisting action and avoid injury. -
IF DRILL STALLS, it is usually because it is being overloaded
or improperly used. RELEASE TRIGGER IMMEDIATELY,
remove drill bit from work, and determine cause of stalling.
DO NOT CLICK TRIGGER ON AND OFF IN AN ATTEMPT TO START A STALLED DRILL — THIS CAN DAMAGE THE DRILL. -
To minimise stalling or breaking through the material, reduce pressure on drill and ease the bit through the last fractional part of the hole.
-
Keep the motor running when pulling the bit back out of a drilled hole. This will help prevent jamming.
-
With variable speed drills there is no need to centre punch the point to be drilled. Use a slow speed to start the hole and accelerate by squeezing the trigger harder when the hole is deep enough to drill without the bit skipping out.
Hammer drill Operation (Fig. A, D)
DCD805 only
- Turn the collar 3 to the hammerdrill symbol.
- Select the high speed setting by sliding the gear shifter 4 back (away from the chuck). IMPORTANT: Use carbide tipped or masonry bits only.
- Drill with just enough force on the hammer to keep it from bouncing excessively or “rising” off the bit. Too much force will cause slower drilling speeds, overheating and lower drilling rate.
- Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
- When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
NOTE: A smooth, even flow of dust from the hole indicates proper drilling rate.
Screwdriver Operation (Fig. A, D)
-
Turn the torque adjustment collar 3 to the desired position.
-
Select the desired speed/torque range using the gear shifter 4 to match the speed and torque of the planned operation.
NOTE: Use the lowest torque setting required to seat the fastener at the desired depth. The lower the number, the lower the torque output. -
Insert the desired fastener accessory into the chuck as you would any drill bit.
-
Make some practice runs in scrap or on unseen areas to determine the proper position of the clutch collar.
-
Always start with lower torque settings, then advance to higher torque settings to avoid damage to the workpiece or fastener.
MAINTENANCE
Your power tool has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/ installing
attachments or accessories. An accidental start-up can cause injury.
The charger and battery pack are not serviceable.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry air as often
as dirt is seen collecting in and around the air vents. Wear approved eye
protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning the
non-metallic parts of the tool. These chemicals may weaken the materials used
in these parts. Use a cloth dampened only with water and mild soap. Never let
any liquid get inside the tool; never immerse any part of the tool into a
liquid.
Optional Accessories
WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product. Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
w with this symbol must not be disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical products and
batteries according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to produce sufficient power on jobs which were easily done before. At the end of its technical life, discard it with due care for our environment:
-
Run the battery pack down completely, then remove it from
the tool. -
Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The collected battery packs will be recycled or disposed of properly.
References
- САЙТ MY.DEWALT
- DEWALT
- 2helpU
- Call2Recycle | Leading the Charge For Battery Recycling
- DEWALT® Power Tools Official Site | Guaranteed Tough®
- DEWALT Tool & Product Warranty Information | DEWALT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>