graph tech 8163-00 Barrel Saddles User Guide
- June 5, 2024
- graph tech
Table of Contents
graph tech 8163-00 Barrel Saddles
Use this guide to determine the size of your current parts to assist you in finding a correct replacement. For a complete listing of over 300 nuts, saddles, and bridge pins, please visit our website at www.graphtech.com Products illustrated are actual sizes.
IMPORTANT NOTE: To ensure accurate printing, please print in Adobe Acrobat Reader, set your printer settings to 100%, and make sure no special printing options are selected.
UNDERSTANDING GRAPH TECH PART NUMBERS
MILLIMETERS
INCHES
ACOUSTIC, ELECTRIC & BASS NUTS
- To size, a nut, measure length, width, height, and the E to E string spacing
ACOUSTIC SADDLES
- To size, a saddle, measure length, width, and height.
BRIDGE PINS/ END PINS
- To size bridge pins/end pins, measure the diameter at the top of the shank, just below the collar
MILLIMETERS
INCHES
ELECTRIC SADDLES
BRASS SADDLES
BRIDGES
not to scale
Tune-o-Matic Measuring Guide
BUSHING OUTER DIAMETERS measured underneath the flange
Wraparound Measuring Guide
BUSHING OUTER DIAMETERS measured underneath the flange
- tel:604-940-5363
- support@graphtech.com
- sales@graphtech.com
- www.graphtech.com
- https://graphtech.com/pages/catalog
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>