SHAO SH320 True Wireless Earbuds User Manual

SHAO SH320 True Wireless Earbuds

Charging the battery

1. Fully charge the charging box and earbuds before using it for the first time.
2. Plug the Type C charging cable into the appropriate socket on the charging box and the other end into your USB charging end .
3. LED display show the battery status. Once the earbuds fully charged, the LED display show 100% outside.
4. Pull out the charging cable the LED light turn off after 30 seconds .

USING INSTRUCTION

• Open the charging box : L and R earbuds turn on and start to pair automatically , “ Connected “ voice remind 2 earbuds pairing successfully and the blue LED light showing on the right earbud , Red Led light showing on the left earbud slow flashing.

• LED display show the battery volume for 30 seconds when we open the charing box.

• The earbuds turn off automatically and charging the earbuds again if the earbuds had not take off from the charging box in 2 minutes.

• Cl ose the charging box : LED display show the battery volume in 30 seconds.

• Charging the earbuds : Earbuds charging the battery automatically in the charging box , the earbuds LED light turn off when fully charged.

• LCD with battery display

  • 4 Colume light on: 100% Battery Display
  • 3 Colume light on: Approx 75% battery
  • 2 Colume light on: Approx 50% battery
  • 1 Colume light on: Approx 25% battery
    Attention :
  1. Make sure the earbuds put into the charging box properly.
  2. Charing one single earbuds , open and close the charging box twice to activate the charing box.

Attention

1. Make sure the earbuds put into the charging box properly
2. Charing one single earbuds , open and close the charging box twice to activate the charing box

Functions and details

• Reject call: Phone in, Long press the L or R side for 1.5 s Answer / Hang up a call: Short touch the L or R side
• Play / Pause music : Tap L or R touch screen part to play and pause music.
• Volume up / Down :
• Music mode : Press and hold the L side , volume down, Press and hold the R side , volume up
• Call Siri : Tap the L or R side 3 times continuously  ( Support L&R side both work or single earbud work )

Auto Pairing

1. L for left ear, R for right ear.
2. Turn on L and R ear at the meantime when 1st time pairing with your phone.Searching “SH320” and connect it. You can use it as mono or enjoy music with both Ears.
3. Cancel and delete the pairing history: Turn off the Bluetooth function for your phone, taking out the earbuds and click L, R Ears 3 times with short tap. The earbuds will shut down the pairing automatically.
   Attention: If you cannot connect it successfully, pls delete all pairing record for your phone firstly. Refresh the Bluetooth function for your phone again , then search “SH320” once again.

Attention and Reminding

• Pls use the headsets while driving.
• Keep all equipment and accessories out of the reach for kids and pets.
• Swallowing any accessories may probably cause suffocation and serious consequences.
• Keep the headsets in a nice enviroment with normal temperature. Extreme high or low temperature will cause deformation of the equipment, reduce the charging capacity and shorten the life of headset.
  We suggest that adjust low and medium volume for call and music. As listening at high volume for a long time, it will damage your hearing to some extent.

Specification

• Model: SH320
• Bluetooth Version: V5.0+ EDR (JL6936D)
• Earphone battery capacity: 35mah single with protective plate polymer battery.
• Charging case battery capacity: 500mAH with protective plate polymer battery.
• Charging power: earphone 5V/1mA,Charging
• Case: 5V/1mA
• Working distance: 15M
• Music time: Around 3.5 hours
• Talking time: arounf 3.5 hours
• Standby time: Around 3 months
• Charging time for earphone: Around 1hour
• Charging time for case: About 1.5hours
• Net weight: 46g
• Product size: 67.2×36.2×32.2mm
• Bluetooth protocol: : Support HSP1.7, HSP1.2、HD Voice, Voice Prompts, HFP1.6 A2DP1.3、AVRCP1.6, IOS, BATTERY, STATE, MONITOR, Voice reporting, Multipoint.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>