GVM-YU300R Bi-Color Studio Softlight LED Panel User Manual

: June 5, 2024
: GVM

GVM-YU300R Bi-Color Studio Softlight LED Panel

GVM-YU300R-Bi-Color-Studio-Softlight-LED-Panel-product-
image

PRODUCT INTRODUCTION

Welcome to ”GVM-YU300R”, this product is specially designed for senior photography enthusiasts. The product is suitable for live streaming / outdoor / studio photography, and also for YouTube video shooting. The main features of the product are:

The light can be adjusted sleeplessly, with 1690 lamp beads, and a color rendering index of 97+, which helps restore and enrich the color of the object, providing you with natural and vivid shooting eﬀects.
APP control can be controlled by your IOS and Android smart mobile devices; at the same time, GVM brand devices that support Bluetooth mesh networking can be used for group control.
With standard DMX an interface， enables DMX control mode with low accuracy 8bit and 16bit high accuracy
With an LCD screen display and a stable system, it supports 180° rotation, which can eﬀectively control the light. Equipped with a matching cover, after installation, the light can be more concentrated and the excess light can be eliminated. You can customize the brightness to ﬁll light, allowing you to adjust the light scene you want at will, and shoot the eﬀect you want.
There are 7 lighting modes, namely: CCT mode, HSI mode, RGB mode, GEL color paper mode, light source matching mode, white light eﬀect mode, and color light eﬀect mode.
CCT mode: white light mode, you can adjust the light intensity and color temperature.
HSI mode: Color light mode, you can adjust the hue, saturation, light intensity (HSI = hue, saturation, light intensity), realize 36 million colors can be adjusted, realize 10,000 colors can be adjusted.
RGB mode: color light mode, adjustable three primary colors (red, green, blue). Achieve 16 billion colors adjustable.
Light source matching mode: This model has 12 diﬀerent styles of light source types to choose from. Can provide you with a speciﬁc light source, saving a lot of time to adjust the light.
White light eﬀect mode: This mode provides 8 white light modes: lightning, CCT cycle, candle, broken bulb, TV, paparazzi, explosion, breathing light.
Colored light eﬀect mode: This mode provides 4 types of Colored light eﬀects: party, police car, hue cycle, disco.

We ﬁrmly believe that the correct use of this product will be of great help to your shooting work. It is strongly recommended that you read the following user guide carefully before using the product.

USE AND SAVE

Do not place the product in high humidity, strong electromagnetic ﬁeld, direct sunlight, high temperature environment. If the product is not to be used for a long time, disconnect the power supply.
Clean: Please unplug the power plug before cleaning. And use a damp cloth instead of any detergent or soluble liquid, so as not to damage the surface layer.
Power supply: Ensure that the power supply is within the scope of use, too high or too low will aﬀect the work.
Maintenance: If there is a malfunction or performance degradation, please do not open the shell package by yourself, so as not to damage the machine and lose the right of maintenance. In the event of a malfunction, please feel free to contact us, and we will do our best to solve the problem.
Accessories: Please use the accessories provided by the manufacturer or approved accessory products in order to give full play to the best performance.
Warranty: Do not modify the product, otherwise the right to repair will be lost.

DISCLAIMERS

Before using this product, please read the instructions carefully and make sure to use the product correctly. If you don’t obey the instructions and warnings, you maybe cause harm to yourself and the people around or even damage the product and other things around.
Once you use this product, you are deemed to have read the disclaimer and warning carefully, understand and acknowledge all the terms and contents of this statement, and promise to take full responsibility for the use of this product and possible consequences.
Design and speciﬁcations are subject to change without notice.

PRODUCT PARAMETER

Brand : GVM
Product Name : Photography lights
Product model : GVM-YU300R
Product Type : Photography Fill Light
Function / Feature : LCD screen,high CRI lamp beads, APP control, Master/Slave mode
Lamp beads quantity : 1690 lamp beads
Color rendering index : ≥97
Color temperature : 2700K~7500K
Lumen : 30000lux/0.5m, 7600lux/1m
Product Size (mm) : 570460160
Add standard lamp shade : 30000lux/0.5m, 7600lux/1m
Light adjustment method : Stepless adjustment
Product Weight : 10 KG
Power :350W
Voltage : AC:100-240V
Power supply mode :Power supply & battery (V-mount battery) Cooling :Forced cooling by fan
Product material : Aluminum alloy + plastic
Commodity origin : Huizhou, China

PRODUCT STRUCTURE ICON

INSTALLATION METHOD

Loosen the rotating button of the lamp holder, install the lamp on the lamp holder as shown in the ﬁgure below, and then tighten the rotating button of the lamp holder.
Loosen the lock handle, adjust the angle of the lamp, and then tighten the lock handle.
Connect the AC power cord for power supply.
Connect the DC power cord for power supply. (DC power cord needs to be purchased separately)
The installation steps of light-controlled folding are as shown in the ﬁgure below. (The light-controlled folding page needs to be purchased separately)
The installation steps of the honeycomb board are as shown in the ﬁgure
The installation steps of the soft box are shown in the ﬁgure below.

DESCRIPTION OF PRODUCT CONTROL KEYS

Knob ①: INT/SELECTOR/R, a multi-function coding knob, you can adjust “select” or “brightness/red” by pressing or rotating.
Knob ②: CCT/HUE/G, multi-function coding knob, can be adjusted by rotating “color temperature/hue/green”.
3 Knob ③: SAT/GM/B, multi-function coding knob, can be adjusted by rotating “color saturation/green product oﬀset/blue”.
Display: display current settings, modes and parameters
Mode button: lighting mode switch button
Menu button: word button to enter the setting menu
Return button: press this button to return to the previous menu
Power ON/OFF button / cooling button: When the light is oﬀ, long press to turn on the light; when the light is on, long press to turn oﬀ the light, and start the large air volume to dissipate until the temperature drops to a touchable temperature.

FUNCTION INSTRUCTION & INSTRUCTION FOR USE

Press the MENU button to enter the menu setting page → turn the [knob①] to select an item → press [Knob①] Enter the project setting interface → Set the parameters of the project by pressing or turning [Knob①] → Press [BACK] to go to the previous menu
DMX SETUP: Set DMX parameters, [address (001-512)] and mode [(8bit/16bit)] DIMMER CURVE: Set dimming [curve/linear/logarithm/exponential/S curve].
LIGHT FREQUENCY: Set dimming frequency, adjustment range [15KHz-25KHz] BLUETOOTH RESET: Select [YES/NO] for Bluetooth reset operation
FAN MODE: Select cooling fan mode, [Auto/Quiet/High] DISPLAY SETUP: Set display backlight [Brightness (0~10)] and backlight display mode [Always On/After 10s] FACTORY RESET: Select [YES/NO] to restore factory settings

CCT MODE

By adjusting the light intensity and color temperature of the white light to achieve the desired light eﬀect. Press the [MODE key] to switch to the [CCT] mode → turn the [rotary button ①] to adjust the brightness, and turn the [rotary button ②] to adjust the color temperature. Turn the [knob ③] to adjust the green/magenta shift of the white light.

HSI MODE (H=hue, S=saturation, I=light intensity)

By adjusting the hue, saturation and light intensity to achieve the desired light eﬀect.
Press [MODE key] to switch to [HSI] mode → turn [knob ①] to adjust brightness, turn [knob ②] to adjust hue, and turn [knob ③] to adjust color purity.

GEL MODE

Two types of colored papers, ROSCO and LEE, are provided. Each of the two colored papers has 30 colors. Diﬀerent colors of colored paper can be selected for light eﬀects. GEL Press the [MODE key] to switch to the [GEL] mode → press the [rotary button ①] to enter the menu selection turn the [rotary button ①] to select the [Rosco] menu or the [LEE] menu → press the [knob ①] to enter the selected menu → turn [Rotary button ①] Select the color in the menu → press the rotary button ①’to enter the setting interface of the selected color → turn the [rotary button ①] to adjust the brightness.

RGB MODE(R=RED,G=GREEN,B=BLUE)

To achieve the desired light eﬀect by adjusting the ratio of red/green/blue Press [MODE key] to switch to [RGB] mode → press [Knob①] to switch [INT] adjustment / [RGB] adjustment. When adjusting [RGB], turn the [Rotary button ①] to adjust the parameters of [R], the [Rotary button ②] to adjust the parameters of [G], and the [Rotary button ③] to adjust the parameters of [B]. [INT] When adjusting, turn the [Rotary button ①] to adjust the brightness.

SOURCE MATCHING MODE

In the light source matching mode, select a light source from the light source menu to match the spectrum. There are 12 selectable light sources in total. Press [MODE key] to switch to [SOURCE MATCHING] mode → press [rotation button ①] to enter the menu → rotate [rotation button ①] to select the light type
→ press [rotation button ①] to enter this type of adjustment interface → rotate [rotation button ① ] Adjust the brightness.

WHITE EFFECT MODE

White light eﬀect mode, 8 white light eﬀects can be selected. Press [MODE] to switch to [WHITE EFFECT] mode → turn [rotation button ①] to select light type → press [rotation button ①] to enter this type of adjustment turn [rotation button ①] to adjust brightness, turn [rotation button ②] To adjust the color temperature, turn the [rotary button ③] to adjust the frequency.

COLOR EFFECT MODE

Color eﬀect mode, 4 optional color light eﬀects.
Press [MODE key] to switch to [COLOR EFFECT] mode → Rotate [Rotary button ①] Select the light type → press [Rotate button ①] to enter this type of Adjustment
→ Turn [Rotary button ①] to adjust the brightness, turn [Rotary button ②] to adjustThe color is pure, turn the [rotation button ③] to adjust the frequency.

APP CONTROL

APP download method
Scan the QR code on the back of the manual to download the APP） Android version: oﬃcial website QR code, Google Play, Huawei store, etc. iOS version: App Store

Register an account
Use E-mail to register and log in (Figure 1);
There may be a delay in sending the veriﬁcation code, and the delivery speed depends on the E-mail server you are using;
Some E-mail servers may recognize our veriﬁcation code Mail as advertising. Please check your blocked E-mail inbox.
Add device
Before adding a device, please make sure that you have turned on the Bluetooth and network data functions of your mobile phone, and reset the Bluetooth of the lighting device;
On the “My Devices” page, click the “Add Device” button, search for nearby Bluetooth lighting devices that have been turned on, and select the device that needs to be connected for network connection. (ﬁgure 2) The Android system needs to enable location permission to use Mesh technology to connect to the device. During this process, we will not collect any of your location information.

Equipment management

After successfully adding your lighting equipment, your equipment will be displayed in the “My Equipment” list; (Figure 3)
Click the device bar to enter the device control. (Figure 4)

PRECAUTIONS

Please use the matching power adapter to power the product, and do not use.
The product is not waterproof, please use it in a rain-proof environment;
The product is not anti-corrosion. Do not let the product come into contact with any corrosive liquid;
When the product is in use, ensure that the product is placed ﬁrmly to prevent the product from being damaged by falling;
When the product is not used for a long time, please turn oﬀ the power of the product to save energy consumption;

SIMPIE FAULTS AND TROUBLESHOOTING

Phenomenon	Check the product	Troubleshooting
The switch indicator does not light up	①Whether the connection between the
lamp and the power supply is normal.

Make sure the adapter is well contacted with the power plug.

②When using a lithium battery to supply power, make sure that the battery does not have “low battery” protection.| Use the product after charging the battery.
After the APP enters to add a device, the Bluetooth of the device cannot be searched.| Check whether the device is normally turned on and whether it has been bound by another person’s connection.| Normal steps:

① The mobile phone turns on the Bluetooth and network data functions, and the Android system needs to turn on the location permission;

② Reset the device Bluetooth.

The App fails to connect to the network conﬁguration of the device.| Check whether the device is turned on normally and whether it has been bound by another person’ s connection; check whether the Bluetooth and network conditions of the mobile phone are good.| After resetting the device’ s Bluetooth and restarting the App, try to connect again.
The device cannot be searched after being removed from the App.| Whether to remove the device when the device is oﬄine or when the network condition is not good.| After resetting the device’s Bluetooth, search and add the device again.
The device in the APP cannot be clicked to enter the control| Check whether the device is online (displays a small green dot); if it is oﬄine, follow the steps for network connection failure to check.| Restart the device, wait for 5 seconds, and it can be controlled when it is displayed as online; reset the device’s Bluetooth, and add the device to the device list again.