T-Sound Wireless Elite Noise Cancelling Earbuds Complete Features

: June 5, 2024
: T-Sound

Table of Contents

T-Sound

T-Sound

T-Sound Wireless Elite Noise Cancelling Earbuds

T-Sound-Wireless-Elite-Noise-Cancelling-Earbuds

Specifications

BRAND : T-Sound
MODEL NUMBER : TS02311
COLOR : White
CONNECTIVITY TECHNOLOGY : Wireless
WIRELESS COMMUNICATION TECHNOLOGY : Bluetooth
PLAY TIME : 6 hours (ANC off), 5 hours (ANC on)
PRODUCT DIMENSIONS : 1 x 0.5 x 1.88 inches
ITEM WEIGHT : 6.7 ounce
BLUETOOTH VERSION : V5.0
CHARGING TIME: EARBUDS: 1.5 hours, Case: 2 hours
STANDBY TIME: 180 days

Introduction

Touch control and the BES2300Z chipset are features of the T-Sound Wireless Elite Noise Cancelling Earbuds. They have two microphones for noise and echo cancellation as well as feedforward active noise suppression. You can enjoy your music, phone calls, etc. for a long time with the 5.5 hours of listening time and 27 hours of listening time with the supplied charging box. These earbuds pair quickly and are built with the most recent Bluetooth 5.0 technology for a stronger and more reliable connection. They will provide you with that powerful stereo sound and are ergonomically constructed. White.

WHAT’S IN THE BOX

earbuds
USB Charger
Charging Case

HOW TO SYNC

While simultaneously removing both earbuds from the charging case, wait a short while for them to switch on and establish a connection. If they don’t instantly pair with one another, put them back in the charging case and remove them again at the same time.

HOW TO SETUP

Open the settings first.
Tap Connections after that.
Next, tap Bluetooth.
In the top-right corner of your screen, select Scan.
Next, hold down the power button on your headphones for a few seconds.
Find your headphones and tap them at the end.

HOW TO CONNECT

STEP 1: Press and hold the power button on both earphones for around 15 seconds while they are in the off position, or until the LED starts to flash blue.
STEP 2: The LED on the right earbud will alternately flash BLUE & RED and BLUE & RED on the left earbud once it has been paired. This indicates pairing mode.

HOW TO USE

STEP 1: Put your headphones in pairing mode as a first step. Put your earbuds in pairing mode as a first step.
Step 2: On your phone, go to Bluetooth Settings.
Step 3: Look for new Bluetooth-enabled devices to scan for.
STEP 4: Choose your device and connect in step 4…
STEP 5: Play your preferred music in step five.

Frequently Asked Questions

How can I tell when the battery in my wireless earbuds is full?

Bluetooth headsets all function differently. However, once your headsets have reached full charge, the earbuds usually start to glow. Red and green lights are most frequently used in headsets. A low battery level is indicated by the red light, while a full charge is indicated by the green light.

What does the blue light on earphones imply when they are charging?

The battery is charged if the exterior blue light is on. It can charge your headphones up to 10 times, according to the user instructions.

What does the earbuds’ red light signify?

Your headphones’ red or amber flashing usually indicates that the battery is getting low. A medium battery level shown by an orange light may indicate that you need to charge the headphones in the next few hours.

Why do my wireless earphones only function on one side?

Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

Why aren’t my earbuds communicating with one another?

Your device’s Bluetooth setting should be disabled. Earbuds will automatically turn on when you remove them from the case. To manually sync them, double- press the left and right earbuds at the same time. NOTE: Give it another shot if it doesn’t work the first time.

Should I always have earbuds on hand?

The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.

Why won’t my left earbud work?

Earphone cable testing and repair. When your left earphone quits working, you should examine the cable as soon as possible. You may check the tiny cable of your earphones by plugging them into your smartphone and repeatedly bending the cable with your fingers to look for any potential cable breaks.

Why do my noise-canceling earbuds attach differently?

You might have a problem with the phone, given the likelihood. Using a separate cellphone, you can determine whether the headset is functioning properly. Make sure the earbud is connected to your device and charged before continuing. If the earphones still don’t work after being connected and reset, file a complaint on our portal.

Why won’t my Bluetooth headphones sync?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

Do earbuds have volume control?

While typical wireless earbuds with an audio cord connecting two earpieces include integrated volume controls, true wireless earbuds have touch-sensitive or conventional buttons on their housings.