ProOne Under Counter Inline Conversion Kit Instruction Manual
- June 5, 2024
- ProOne
Table of Contents
Counter Inline Conversion Kit
Instruction Manual
Under Counter Inline Conversion Kit
This kit is used specifically for converting a single-stage countertop unit to
an under-counter unit that runs in line with the existing cold water line.
Contents
Your kit includes the following:
(a) bracket w/4 screws
(b) brass fittings (2)
(c) stainless steel 30” flex hose with 3/8” female ends
Installing Your Kit
- Uninstall the countertop unit from the faucet.
- Remove the base from the countertop unit.
- Install bracket(a) in place of countertop base.
- Remove spout and existing inlet fitting.
- Install new lead-free brass fittings(b) using Teflon tape (about 2 wraps per fitting)
- Turn off cold water supply under the sink.
- Remove the existing line from shutoff valve.
- Install flex hose(c)
- Reconnect line (d) *Periodically check the installation for any leaks.
For technical support call
1(800)544-3533 or email
support@prooneusa.com
Read User Manual Online (PDF format)
Loading......