AIRVERSA AP2 Purelle Smart Air Purifier User Manual

AIRVERSA AP2 Purelle Smart Air Purifier

Hello!
Thank you for choosing Purelle, our latest innovative product that combines powerful air purification and smart capabilities. Airversa specializes in creating air treatment products that truly improve the quality of the air you breathe. A lot of technology has been built into the Purelle; it works with Apple HomeKit using Thread technology, the latest future-proof wireless protocol for the smart home. With a thread-enabled Border Router (HomePod mini or 2021 Apple TV 4K), you can control your Purelle using your iOS devices anytime, anywhere. Its advanced 3-Stage True HEPA Filtration system removes 99.97% of airborne contaminants down to 0.3 microns. Purelle is optimized for small and midsized rooms such as bedrooms, living rooms, basements, home gyms, kitchens, offices, and more. We make it compact and stylish enough to perfectly fit on a tabletop, and easy enough to move from room to room. For now, please be sure to explore all of its features outlined in this manual. If you have any questions, feel free to just drop us an email anytime. We’d love to assist you to get the most out of it!

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING. IF THE POWER CORD OR UNIT DOES NOT WORK, CONTACT AIRVERSA CUSTOMER SERVICE IMMEDIATELY.
When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:
ATTENTION

• Check your air purifier cord and plug connections. Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tightly in the outlet.
• This air purifier is not intended for use in bathrooms, laundry areas, and similar moist indoor locations.
• To disconnect the air purifier, first, turn the controls to the off position, then remove the plug from the outlet.
• Use this air purifier only for its intended use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons.
• To effectively clean air, keep windows and doors closed while the air purifier is on.
• This product is intended for household use only.
• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• This air purifier is not intended to be used to perceive documents or in art conservation.

MUST DOs

• Always unplug the air purifier when not in use for a long time.
• Always unplug the air purifier from the electrical outlet immediately before cleaning or replacing filters.
• Always keep the cord away from heated surfaces.
• Always place the air purifier on a firm, leveled surface.
• Always place the air purifier at least 6 inches away from walls and 3 feet from heat sources such as stoves, radiators, or heaters.

WARNINGS

• Do not reach for the air purifier that has fallen into the water. Unplug it immediately.
• Do not place or store appliances where they can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not operate in wet or moist conditions. Keep dry.
• Do not touch the air purifier or its power plug with wet hands.
• Do not attempt to defeat this safety feature.
• To do so could result in an electrical shock hazard.
• Do not operate the air purifier with a damaged cord or plug, or after the air purifier malfunctions, or has been dropped or damaged in any manner.
• Do not run the cord under carpeting.
• Do not cover the cord with throw rugs, runners, or similar coverings.
• Do not route cord under furniture or appliances.
• Arrange the cord away from traffic areas where it can be tripped over.
• Do not tilt or move the air purifier while it is in operation. Shut it off and remove the plug from the outlet before moving it.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electrical shock or fire, or damage the air purifier.
• Do not block air intakes or exhaust in any manner.
• Do not use it on any soft surface, like a bed, where openings may become blocked.
• Do not operate the Purelle air purifiers without filters. Do not wash and reuse the filters.
• Do not use outdoors.
  SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE.

WHAT’S IN THE BOX

1. Purelle Smart Air Purifier
2. H13 True HEPA Composite Filter Set (Inside Device)
3. User Manual
4. Power Adapter

The image shown here is indicative only. If there is an inconsistency between the image and the actual product, the actual product shall govern.

3-STAGE HEPA H13 AIR FILTRATION

Disposing of used filters

Filters can’t be cleaned or recycled. After removing a used filter, wrap it in an airtight plastic bag for disposal. As an extra precaution, wear gloves when handling a dirty filter.
Please disposal the used filters as combustible rubbish.

Warning:

• Do not wash and reuse the filters.
• For optimal performance, only Airversa filters should be used with this unit.

To purchase replacement filters, please go to: www.airversa.com

SPECIFICATIONS

L 220 x W 220 x H 345 mm

SET UP PURELLE

1. Unscrew the knob on the base according to the directional marks.
2. Remove and put aside the base.
3. Take out the new filters (wrapped in plastic films) from the product.
4. Remove the plastic films on the filters.
5. Install the filters into the product. The pull tabs should face inward.
6. Install the base to the product, and tighten the knob according to directional marks.

LET’S BEGIN

1. Once connected to the air purifier, plug the adapter to a standard AC outlet, and you will hear a “ding” sound.
2. Tab the power button on the control panel to turn it on. Meanwhile, the screen lights up.

HOW TO USE

Control Panel Explained

• Auto Mode Button
  Tap to turn Auto Mode on/off
  When Auto Mode is active, Purelle uses its built-in PM 2.5 sensor to adjust the fan speed automatically based on air quality. For example, the better the air quality, the lower the fan speed, or vice versa.

• Timer Button
  Tap to cycle through timer options
  Each increment is 1 hour. The timer will count down from your selected time. When the time is finished, Purelle will turn off. To cancel a timer, tap the button repeatedly until the display reads “0”.

• Sleep Mode Button
  Tap to turn Sleep Mode on/off
  Sleep Mode operates quietly by using a fan speed lower than low speed. It will turn off the display after 10 seconds if no other buttons are touched. When the display is turned off, tap any button to turn the display back on.

• Network Indicator
  Indicates pairing status
  Product has been paired to the network > Light stays on Product has not been paired to the network > Light will blink and then turn off after 5 minutes each time when the product is powered on. Long press 10s to enter pairing mode.

• Fan Speed Button
  Tap to cycle through fan speeds
  Tapping the Fan Speed Button while the air purifier is in Auto Mode will exit that mode.

• Child Lock
  Prevents current settings from being changed
  Press and hold for 5 seconds to turn Display Lock on/off. The indicator will blink 3 times along with 2 beeps when any other button is tapped to indicate that Display Lock is on.

• Filter Status Indicator
  Press & Hold to reset filters
  Blinks red when the filter should be checked or replaced. Press and hold for approx. 5s to reset the Filter Status Indicator.

• Filter Life Indicator
  Indicates filter consumption

• Power Button
  Tap to turn Purelle on/off

SMART SETUP

1. Make sure you have an Apple HomePod mini or 2021 Apple TV 4K ready.
2. Download the Sleekpoint App from Apple App Store and then open it on your iOS devices.
3. Long press the Network button to enter pairing mode.
4. Add Purelle to the app following the on-screen instructions.
5. Once setup is complete, you may have access to exclusive features such as PM2.5 Charts & Reports, Scheduling, Screen Brightness Control, etc.

FILTER REPLACEMENT

1. Unscrew the knob on the base according to the directional marks.
2. Remove and put aside the base.
3. Pull the tabs to remove the old filters from the air purifier.
4. Remove the plastic films on the new filters.
5. Install the new filters into the air purifier. The pull tabs should face inward.
6. Install the base to the air purifier, and tighten the knob according to directional marks.
7. Once connected to the air purifier, plug the adapter to a standard AC outlet, and you will hear a “ding” sound.
8. Press and hold the Filter Status Indicator for approx. 5s to reset the indicator.

CLEANING AND MAINTENANCE

Cleaning the Pre-Filter
It is recommended to vacuum the pre-filter once a month under normal usage:

1. Unplug the air purifier.
2. Unscrew the knob on the base according to the directional marks.
3. Remove and put aside the base.
4. Pull the tabs to remove the filters from the air purifier.
5. Vacuum the light-color sides of the filters using the brush attachment of your vacuum cleaner, cleaning it thoroughly.
6. Install the filters back into the air purifier. The tabs should face inward.
7. Install the base to the product and tighten the knob according to directional marks.
8. Once connected to air purifier, plug the adapter to a standard AC outlet, and you will hear a “ding” sound.
9. Power on the air purifier, then press and hold the Filter Status Indicator for approx. 5s to reset the indicator.

Warning: Vacuum-cleaning the pre-filter help remove large particles partially and only. It does not extend the filter life.

TROUBLESHOOTING

Air purifier does not operate

| ****

Not plugged in

| ****

Plug in the air purifier

---|---|---

Power button not pressed

| ****

Press to turn it on

No power

| ****

Check circuits, fuses, try a different outlet

Reduced airflow

| ****

The air inlet(s) or outlet may be blocked

| Make sure side air inlets or top air outlet are not blocked

Pre-Filter needs vacuuming

| Vacuum the pre-filter with the brush attachment of your vacuum cleaner

The filter needs to be replaced

| ****

Replace the filter

Reduced odor removal

| ****

The filter needs to be replaced

| ****

Replace the filter

Excessive noise

| ****

Air purifier is not level

| ****

Place the unit on a flat and level surface

Filter Status indicator remains lit after

filter replacement

| The Filter Status indicator needs to be reset| Press and hold the Filter Status Indicator for approx. 5s to reset the indicator

If you need further assistance, please feel free to contact us via support@airversa.com

WARRANTY

Sleekpoint Innovations Co., Ltd. (Sleekpoint) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 1 year from the date of original purchase. Sleekpoint agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase. There is no other express warranty.
This warranty does not apply:

• If the product has been modified from its original condition;
• If the product has not been used in accordance with directions and instructions in the user manual;
• To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
• To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than Airversa;
• To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
• To damages or defects exceeding the cost of the product.

Sleekpoint will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty. This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty. This warranty does not extend to products purchased from unauthorized sellers. Sleekpoint’s warranty extends only to products purchased from authorized sellers that are subject to Sleekpoint’s quality controls and have agreed to follow its quality controls. All implied warranties are limited to the period of this limited warranty. If you discover that your product is defective within the specified warranty period, please contact Customer Support via support@airversa.com. DO NOT dispose of your product before contacting us. Once our Customer Service Team has approved your request, please return the product with a copy of the invoice and order ID.

FCC WARNINGS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by Shenzhen Rundian Innovation Technology Co. Ltd. may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Contains FCC ID: 2AA72-PTR9818

CUSTOMER SUPPORT

support@airversa.com
www.airversa.com

References

• AIRVERSA: Buy Smart Air Purifiers, Diffusers & HEPA Filters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>