Tropernic Tuya BLE Version Smart Cylinder Door Lock Fingerprint User Manual
- June 5, 2024
- Tropernic
Table of Contents
Tropernic Tuya BLE Version Smart Cylinder Door Lock Fingerprint User Manual
Packing Accessories
Please check the packing box and accessories when you got the item in hand.
-
Smart Lock
-
Epoxy Card
-
Manual Key
-
Sucker
-
Tool
-
Manual
Product Specification
Reader View
Dimension
INSTALLATION STEPS
-
Please use the screw driver to take off the screw on the back knob position, refer the below Pic.1:
-
Please insert the cylinder to the existed lock and fix the cylinder with the long screw as picture 2.
-
Please use the screw driver to fasten the screw on the back knob position, refer the below picture 3:
-
Please take off the reader cover with the magnet or sucker (included in our accessories bag),assemble 1xCR123a alkaline battery, refer the below picture 4:
Notice after you insert the key into the key hole and turn clockwise, you shall turn the reader to unlock the door but not to use the key to unlock the door directly. -
Please test with your fingerprint under the factory state, any fingerprint will unlock the door lock, refer the below picture 5:
-
Please test the lock with key card after you configure the lock with Tuya smart APP (Refer the Part 6).
Notice the keycard or fingerprint can only be enrolled by the Tuya smart APP, so it is important to install this app in your mobile before start daily use.
Tuya APP Settings
Please download the Tuyasmart or Smart life on Apple store or Google play.
also you can scan the QR code below to download the APP directly.
-
Please register one account with your E-mail or mobile number.
-
Sign Up
-
Enter mobile or mail Get Verification Code
-
Enter the code sent to your mail or mobile
-
Set password and login
Intelligent Configuration
Please run the Tuya smart APP and click “Add Device” on the right top position
for auto scan:
Function Description
Under Tuya smart APP interface, you can see the features for the smart locks,
such as Memeber /unlock records and settings etc.
Add User Fingerprint
Under Tuya smart APP setting, you can click the fingerprint management and add the fingerprint.
-
Step 1: Click Add Fingerprint.
-
Step 2: Select User..
-
Step 3: Start Capturing.
-
Step 4: 5 Times and done.
Add User Card
Under Tuya smart APP setting, you can click the card Management and add the card.
-
Step 1: Click Add Card
-
Step 2: Select User
-
Step 3: Tap Card on the lock induction area.
Smart Linkage and Settings
Under the settings, you can click the smart linkage for more scene and more
options for the features upon the using condition.
Passage Mode
Under Tuya smart APP setting, you can tick”automatic lock switch”, under this
setting the lock will be in always open state, you can press any valid
fingerprint to cancel this passage mode.
Reset the Lock
Under Tuya smart APP setting, you can click the “Remove Device” to reset
the lock and the lock will be set to factory state, you can use any
fingerprint to unlock the lock.
Sales and Service Terms
- Please read the manual carefully before use!
- Limited 1-year Electronic Warranty Limited Lifetime Mechanical and Finish Warranty
- This S1 product comes with a 1-year Limited Warranty on Electronic Parts and a Limited lifetime. Mechanical and Finish Warranty against defects in materials and workmanship under normal use to the original residential user. Proof of purchase and ownership is required for the warranty to be in effect.
- Any error or question in our manual or sales term, please feel free to contact with us.
- For any wrong operation or installation to the user, we do not responsible for the duty.
- For the damage caused by anthropic factor or inevitable reason, we do not pay for the loss or maintain for free, please check our after sale service terms.
- Please do not take apart the lock if you are not technician, if necessary, please make the operations under the guide of technician.
- Notice: there maybe a little difference for product pictures with real product, please subject to our real products.