schneider SC320ACLGRY Portable FM Radio Player Instruction Manual

Instruction Manual

Portable DOUBLE CLOCK DAB+/FM Radio
Player SC320ACLGRY / SC320ACLRED
Please read the following instructions carefully before using them. Please keep these instructions for any future reference
at schneiderconsumer.com

IMPORTANT SAFETY INSTRUCTIONS

Warnings

• To prevent fire or shock hazards do not expose this appliance to rain or moisture.
  

• Warning: Shock hazard- do not open.

• the lightning flash with arrowhead symbol: Within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

• Exclamation point: within an equilateral triangle is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reasons.

• Dripping warning: The product shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product.

• Ventilation warning: The normal ventilation of the product shall not be impeded for the intended use.

• Safe sound :

1. Reduce volume before plugging the earphones/ headphone.
2. The Speaker of the unit is automatically disconnected while earphones/ headphones are connected.
3. Adjust the volume to a comfortable listening volume level.

• Important! It is recommended not to leave a mobile phone near the unit in order to avoid electromagnetic interference in the speakers.
• Caution! Dangerous tension inside the product! Do not open. Risk of electric shock! No parts can be repaired by the end-user. Only qualified personnel can repair and maintain this product
• If the electric cord is damaged, it must be replaced by the manufacturer or qualified aftersales personnel in order to avoid any danger.
• The product must be installed in accordance with local laws.
• Damaged batteries must be properly disposed of. In order to protect the environment, please dispose of the batteries properly, in accordance with local laws (information is available at your reseller).
• To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol, ammoniac, benzene or abrasive as this may harm the housing.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Apparatus shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
• Use only power supplies bundled with the product.
• Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.
• The product is suitable for tropical climate use.
• The product is for indoor and household use only.
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
• WARNING: – Do not ingest the battery, Chemical Burn Hazard (The remote control supplied with).
  – This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  – Keep new and used batteries away from children.
  – If the battery compartment does not close securely, stop using the product and keep it away from children.
  – If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

IMPORTANT

IT IS FORBIDDEN TO REPLACE THE POWER CABLE BY YOURSELF. IF DAMAGES MUST BE REPAIRED BY THE SERVICE OF A LOCAL DISTRIBUTOR BY THE MANUFACTURER OR BY A QUALIFIED PERSON. IF THE UNIT IS FALLEN, PLEASE ASK A QUALIFIED PERSON OF THE CHECK BEFORE USING IT AGAIN OF INTERNAL DAMAGE COULD LEAD TO ACCIDENTS. FOR ALL TYPES OF PROBLEMS OR REPAIRS, PLEASE CONTACT THE SERVICE OF A LOCAL DEALER, THE MANUFACTURER OR A QUALIFIED PERSON, TO AVOID HAZARDS.

DISPOSAL AND ENVIRONMENTAL RESPONSIBILITY
In order to be environmentally friendly, we encourage you to take this device correctly. You can contact your local authorities or recycling centers for more information.

Read carefully the instructions before use.
This product complies with the requirements imposed by the 2014 / 53 / EU and 2014/30 / EC (repealing Directive 89/336 / EEC)

DESCRIPTION

➢ Appearance

1. BACK
2. NEXT
3. SCAN
4. ALA
5. INFO
6. ENTER
7. TIME/PROG
8. FUNCTION /
9. POWER SELECTOR9. SNOOZE/DIMMER
10.  AL1 FUNCTION SELECTOR
11. AL2 FUNCTION SELECTOR
12. VOLUME KNOB
13. USB PORT FOR CHARGING
14. VGA LCD DISPLAY

➢ Power Supply

• Using AC Electric supply.
• Please unplug the product in case of prolonged non-use.
• If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales personnel to avoid any danger.
• This product must be connected to an electrical supply of 100-240V ~ 5060Hz.
• The mains plug is used as the disconnect device, so the disconnect device shall remain readily operable.
• Do not use a product with a battery different from the one provided.

Caution: Explosion risk if the battery is not replaced correctly.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine or fire or any other heat sources.

➢ Backup battery installation
Your clock radio requires one CR2032 lithium battery (included) to provide backup power to the clock in the event of a temporary power interruption.

1. Open battery cover located at the back of the unit. A screwdriver (not provided) is necessary in order to protect young children.
2. Insert one CR2032 lithium battery into the battery compartment with the “+” side facing up.
3. Close the battery cover.

If AC power is interrupted, the LCD display will go off and both the radio and the alarm will stop. The backup battery will keep the time and all settings of your unit.
Make sure a new CR2032 lithium battery is used.
Note: Do not use the old battery for backup, which may lead to abnormal display appearing. In case an abnormal display appears, please take out the backup battery and then unplug the clock radio.

PREPARATION FOR USE

• Unpacking and setting up
  Where to install the product:
  – Place the product in a straight, rigid, and stable place. Do not place the product on a carpet.
  – Do not place the product on top of another that may cause overheating (for example, a receiver or amplifier).
  – Do not place anything underneath the product (for example, CDs or magazines).

• Proper ventilation
  – Place the product in a sufficiently–aerated place to avoid overheating.
  Allow at least 10cm spacing at the back and top of the product, and 5cm spacing on both sides to prevent overheating.
  – Do not place items such as newspapers, tablecloths, or curtains, in front of the ventilating openings.

• Do not expose the product to high temperatures, moisture, water and dust.

• The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such as vases, shall be placed on the apparatus.

• Do not place other items close to this product that may damage it (for example, objects containing water or lightened candles).

• No naked flame sources, such as lighted candles, should be placed on the apparatus.

• To use the USB port for charging Connect your mobile phone with the USB port by a USB charging cable (not provided) to charge.

Note :

1. The USB port is only for the USB recharging function, and it cannot support a USB player to play music.
2. When the USB jack is recharging the mobile phone, the maximum current is 500MA. Please choose another device in case of fast recharge.

OPERATION

➢ Radio
a) Setting time

1. In standby mode, press and hold the TIME button, and the hour digits flash.
2. Press the BACK / NEXT button repeatedly to set the current hour digits.
3. Press ENTER button to fix the Hour time and start the Minute digits flash.
4. Press the BACK / NEXT button repeatedly to set the current Minute digits.
5. Press ENTER button again to confirm the setting.
6. The confirmed time will be displayed on the LCD directly.

b) Setting the alarms

1. Short press ALA to start the alarm setting process.
2. Press the BACK / NEXT button to set Alarm1 or Alarm2 mode.
3. Press ENTER button to start the alarm time setting process, and the hour digits flash.
4. Press the BACK / NEXT button repeatedly to set the alarm hour digits.
5. Press ENTER button to fix the Hour time and start the Minute digits flash.
6. Press the BACK / NEXT button repeatedly to set the Minute digits.
7. Press ENTER button again to confirm the Alarm1 setting.
8. Press the BACK/NEXT button to set the sleep function, and press ENTER button to confirm.
9. Move the AL1 or AL2 selector to position BUZZ or RADIO to select the alarm tone, the related alarm is turned on, and A1 or A2 icon keeps lighting up on the display.

c) Stopping and resetting the alarm to come on the next day When Alarm 1 or 2 is sounding, the related A1 or A2 icon flashes. Press the FUNCTION/POWER button once to stop the alarm and reset it to come on the following day. After that A1 or A2 icon keep lighting up on the display.
Note: When AL1 or AL2 selector is moved to off position to stop the alarm, then push AL1 or AL2 to position BUZZ or RADIO reset it to come on the following day.

d) Cancel the Alarm
Move the AL1 or AL2 selector to position OFF, then the alarm function will be canceled.
e) Snooze operation (default snooze duration is 9 minutes) When an alarm is sounding, press the SNOOZE/DIMMER button once, the alarm will be silent and come on again after the default snooze duration.

Note: if your second alarm activates while the first alarm is sounding or it is in snooze mode, the second alarm overrides the first alarm (the first alarm is reset to come on the next day).
f) Using the dimmer
Make a long press SNOOZE/DIMMER button to adjust the brightness of the LCD display.
g) Listening to FM radio

1. To turn on the radio. Long press the FUNCTION/POWER button till 2S, the display shows FM radio /DAB radio information.
2.  Short press the FUNCTION/POWER button once, selected the function in FM radio, and press ENTER the display shows FM radio frequency in MHz.

Manual tuning

1. Press BACK/NEXT to tune the radio. The radio frequency will forward or Back selection and the LCD Display will be shown the relative radio program.
2. To adjust the volume, rotate the VOLUME knob to the position you want.
3. Press and hold the FUNCTION/POWER button to turn off the radio.

Auto tuning

1. Long Press BACK/NEXT till 3S to scan automatically, stop the scanned mode and play scanned radio programs directly.
2. Short press the SCAN button once, and the unit will be started to scan automatically, the unit will be stored the scanned program automatically, stop the scanned mode and play scanned radio programs directly.
3. Press the TIME/PROG button once, and then press BACK/NEXT to tune the radio to a stored station.
4. Press ENTER button to play the selected Program directly.
   ♪ Remark: FM:87.5-108MHz the STEP mode is 50K MHz
   Note: For better FM reception, there is a built-in FM antenna wire at the rear of the unit. Move the wire around to obtain the best reception.

h) Using the Program memory
This clock radio features a total of 40 preset memories of FM stations.
These allow you to preset your favorite stations and access them quickly.

1. In FM mode, Press the SCAN button, and the unit will scan the FM radio program to store in Memory automatically. The max Memories of FM radio is 40 stations.
2.  When using the stored Radio station, short press the TIME/PROGRAM button, and the displaying will be shown the Memory 1.
3. Press the BACK/NEXT button to select the favorite Memory radio station (The max Memories of FM radio is 40 stations).
4. Press ENTER button to start playing the selected Memory radio.

➢ DAB radio
After turning on the radio, short press the FUNCTION/POWER button to select the function into DAB mode, and the display shows DAB information.
Then press ENTER. then DAB will auto scan all the frequency points searched, and all the programs searched are list in the DAB station list by the short lable dictionary. If the DAB program list is Empty, DAB mode will always be displayed in the DAB menu mode.
Note： If DAB is playing, press SCAN, then press INFO to enter the menu model.

a) Fully automatic search
In menu mode, press NEXT/BACK to select FULL scan, then DAB enter Scanning.

b) Manual search In menu mode, press NEXT/BACK to select the manual tune, press ENTER, Search for a certain frequency selected by the DAB, and press NEXT/BACK to search the frequency selection of the DAB, then press the ENTER button to enter the frequency. The frequency is displayed at this time. For the signal strength, press the INFO button twice to exit the search.

c) Dynamic range control
in menu mode, Adjust the dynamic range of the DAB. There are three levels in total: off, low, and high. Press ENTER to select; the selected item has a ‘*’ sign in the upper right corner.

d) Prune
In menu mode, Prune invalid programs in the DAB program list.
This is equivalent to clearing the program without a signal after a Full scan.

e) System
In the menu mode, press BACK/NEXT to enter the system, press BACK/NEXT to select a language, press ENTER into the language you need.

f) Preset Recall
Short press the TIME PROG button to enter the interface. Use the BACK and NEXT keys to view the program memorized at each memory point. The short lable is displayed.  When a memory point is selected, press ENTER to call up and play this. The program that remembers the memory point, if it is empty, displays Empty.

g) Preset Store
Press and hold the TIME PROG button to enter the saver interface. Use the BACK and NEXT keys to select the memory location. Press TIME PROG again to switch to memory preset mode. When a memory point is selected, press the ENTER button to save the currently playing program to this memory point.

Note: If there is no operation, the menu will automatically exit after 30 seconds.
h) DAB Playing
The first line shows the name of the DAB program Long lable.
Press the INFO button to view information about the DAB program in sequence:

1. Have a signal:
   DLS: Dynamic Lable Segment dynamic text information, if not,display Playing;

2.  Signal Strength:
   DLS: Dynamic Lable Segment dynamic text information, if not, display Playing;

3.  Program Type:
   If not, display No PTY;

4. Ensemble Name:

5. Frequency and Channel:

6. Signal error：23%

7. Bitrate and Audio type

8. Time: If not, display No Time;

Program list

1. Press the TIME PROG button into memory preset mode.
2. Press BACK and NEXT selection of the favorite memory location, and press Enter to confirm the selected program. If you do not press ENTER, this show is automatically played after 3 seconds by default.
3.  Press TIME PROG again (switch to Memory preset mode)

PRESET playing
✓ Preset Recall: Press the TIME PROG button shortly to enter the interface. Use the BACK and NEXT keys to view the stations memorized by each memory point. The frequency is displayed. When a memory point is selected, press the ENTER button to call up and play the station memorized by this memory point. If it is empty, it shows Empty.

✓ Preset Store: Press and hold the TIME PROG button to enter the saver interface. Use the BACK and NEXT keys to view the stations memorized by each memory point. The frequency is displayed. If it is empty, the display is Empty. When a memory point is selected, press the ENTER button to save the currently playing station to this memory point.

✓ Auto scanning: Press the SCAN button, the system will search all the times from the low-end frequency to the high-end frequency according to the set stop sensitivity.

CLEANING AND MAINTENANCE

• To prevent fire or shock hazards, do not allow this portable radio to be exposed in rain or moisture.
• This portable radio should not be exposed to direct sunlight, very high or low temperature, moisture, vibration, or placed in a dusty environment.
• Do not use abrasives, benzine, thinners, or other solvents to clean the surfaces of the clock radio. To clean it, wipe with a mild non-abrasive detergent solution on a clean soft cloth.
• Never attempt to insert wires, pins, or other objects into the ventilation holes or openings on the portable radio.

TROUBLESHOOTING

1. If your clock displays an irrelevant time or does not function properly, which may be caused by electrostatic discharge or other interference, disconnect the AC power (and remove the backup battery). The clock radio will reset to default settings and you need to set it again.
2. If an abnormal display appears, please take out the backup battery and then unplug the clock radio. Replug the clock radio after 1-2 minutes.
3. The USB port is only for the recharging function, and it cannot support music playback with a USB key.

TECHNICAL SPECIFICATIONS

Tuner:
Tuner Range| FM : 87.5 – 108 MHz
DAB: Frequency Range| Band III (174 – 240MHz)
Operation Power Consumption| 6.0 W
AC/DC Adaptor
Input| 100 – 240V – 50-60Hz
Battery| CR2032 x1
Speaker Power| 3W

Important: Due to continual revision and improvement of our product design, specifications are subject to change without further notice.

DISPOSAL
If you want to discard your electrical device, either to replace it or because you no longer use it, think about the environment. Check with local authorities as there are a number of recycling centers that help protect the environment.

This logo set on the product means that the recycling of this apparatus comes within the framework of the directive 2012/19/EU of July 4, 2012, concerning the waste on electrical and electronic equipment (WEEE).
– The presence of dangerous substances in the electrical and electronic equipment can have potential consequences on the environment and human health in the cycle of reprocessing this product.
– Therefore, at the end of its lifetime, this product shall not be disposed of with other non-recycled waste.
– As the end user, your role is of prime importance in the cycles of re-using, recycling, and other forms of valorization of this electrical and electronic equipment. Local authorities and resellers have set special procedures for the purpose of collecting and recycling this product.
– You have the obligation to use the selective waste collection systems put in place by your local authorities.

Warranty :
The warranty does not cover the worn parts of the product, nor the problems or damage resulting from:

1. surface deterioration due to normal wear and tear of the product;
2.  defects or deterioration due to contact with liquids and corrosion caused by rust or the presence of insects;
3.  any incident, abuse, misuse, alteration, disassembly or Unauthorized repair;
4.  improper maintenance, improper use Concerning the product or connection to an incorrect voltage;
5. any use of accessories not supplied or not approved by the manufacturer.
   The guarantee will be canceled if the nameplate and/or a serial number of the product are removed.

Imported by : SCHNEIDER CONSUMER GROUP
12, rue Jules Ferry, 93110 Rosny-sous-Bois, FRANCE
schneiderconsumer.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>