Shenzhen Lessmore Innovation Technology W60-10000mAh Magnetic Wireless Charger and Battery Instruction Manual

June 5, 2024
Shenzhen Lessmore Innovation Technology

Lessmore Innovation Technology W60-10000mAh Magnetic Wireless Charger and Battery
Instruction Manual
Shenzhen Lessmore Innovation Technology W60-10000mAh Magnetic Wireless
Charger and Battery

Magnetic Wireless Charger
And Battery
Product Manual
W60-10000mAh

Thank you for choosing us!
The3inl magnetic wireless power bank can quickly and accurately capture the charging position, and the charging is faster and more convenient. The magnetic wireless charger has two incompatible charging boards, which can greatly improve the charging efficiency. You can charge your mobile phone or watch at any time, this product powerful, high-end fogion design. t can also be used, mobile phone holder

ABOUT WIRELESS CHARGER

Shenzhen Lessmore Innovation Technology W60-10000mAh Magnetic Wireless
Charger and Battery - fig

SPECIFICATIONS

Capacity 5000mAh
Input(USB-C) 5v.244.9v2.2A
output(USB-C) 5w244.224.I2vI.5
Input(Lightning ) 5v 2.4A
wireless 1 5w7w15w(MAX.)
wireless 2 2w(for Apple Watch)

Note
QC30/PD Quick Charge wolf adapter (I8w) required for Fast Charge Mode
GUIDE ON HOW TO USE IT
INPUT
Connect the Power bank to the 0C30/PDtast charging wall adopter You con the use0SB-CrLightning Port to charge the Power bank.4 white lights ruse to diploy the capacity of the battery light represents 25%.Shenzhen Lessmore
Innovation Technology W60-10000mAh Magnetic Wireless Charger and Battery - fig
1

2. OUTPUT: (WIRELESS CHARGING)
Press the button, the blue light flashes 3 times to start the wireless charging. During wireless charging, the blue light is always on. (Note: to detect the signals of 2 wireless charging positions, the phone charging pop-up window will prompt twice.)
Charging For phone:
Shenzhen Lessmore Innovation Technology W60-10000mAh Magnetic Wireless
Charger and Battery - fig 3Note: Please press the button every time you add a wireless charging device to use.
Charging For Apple Watch: ‘Please kindly noted that the watch strop must be straightened.
Shenzhen Lessmore Innovation Technology W60-10000mAh Magnetic Wireless
Charger and Battery - fig 4NOTE: When the room temperature is above about 26ºC)
Not recommended to wireless charge iPhone and Apple watch at the same time. If the temperature is too high, the watch may stop charging. Wireless charge the iPhone/Apple watch to 80%, due to Apple’s battery protection function, the wireless charging efficiency becomes slower.
OUTPUT: (USB-C CHARGING)
The USB-C port supports QC and PD fast charge output. Connect the USB-C port to the mobile phone, the mobile phone can be quickly charged. The 4 white lights represent the battery level, each light represents 25%.
Shenzhen Lessmore Innovation Technology W60-10000mAh Magnetic Wireless
Charger and Battery - fig 5 3. Metal FOD:
(Foreign Object Debris) When blue light flashes quickly it shows Metal FOD(Foreign Object Debris) on the surface or it is not working properly. Please remove the device and FOD immediately, then restart the product for reuse.
4. NTC Protection:
(Negative Temperature Coefficient protection) When the product is overheated, NTC will start overheating protection, 4 white lights will flash and stop charging. You need to remove the phone/watch and wait for the temperature to drop, then press the button again to restart the charging function.

COMPATIBILITY

Wireless Charging Compatible models: All Qi-enabled phones and devices. Magnetic charging mode: iPhone12/13 Pro MAX. Other mobile phones use magnetic charging, please use a magnetic protective case. If your device does not support 01-Standards, you need additional wireless receivers for the charger.

PLEASE NOTE

  1. Generally, the full charge of the mobile phone is 3-4 hours. Please remove the mobile phone immediately after the mobile phone is full to avoid overheating. Please do not charge the phone continuously for days!
  2. Please try to align the phone with the surface dots to improve the charging efficiency. It the charge is unstable or not charging, adjust the phone position.
  3. If the phone case is too thick, please remove the case to increase the charging efficiency.
  4. It’s normal for your device to get slightly warm during inductive charging. It has an overheating protection function inbuilt.
  5. Do not place metal objects. magnetic cards, and metal phone cases on the charging pad, as this may cause damage or the charger may not work. Compatible with most kinds of phone cover cases, including rubber cases. hybrid cases, plastic/TPU/PC cases etc.
  6. Do not place the charger closely to the magnetic stripes or chip cards(ID cards, bank cards)to avoid magnetic failure.
  7. Make sure that the pad doesn’t get too hot. If it does, take your phone away from the pad, and switch the charger off; when the plate has cooled down try charging again.

FAC1AND SOLUTION

  1. Why does the blue light keep on and my phone does not receive any charge? – Please make sure your mobile device is Qi-standard supported. – Make sure you find the right charging position. – Make sure you use an AC adapter with not less than 1 A output.
  2. Why does it charge slower than my usual charging adapter that Some with the phone? It depends on the receiver in your phone. The let-through current of bulit-in coil of the phone or external receiver coils is different. Please bring the wireless charging area of the your device to the center of the wireless charger. It will be more efficient.
  3. Is radiation from wireless charging harmful to one’s health? The wireless charger emits non-ionizing radiation which is not harmful to humans.

SAFETY INSTRUCTIONS

  1. Do not disassemble the device or throw it into the fire or water, to avoid causing a short circuit.
  2. Do not use the wireless charger in severely hot, humid or corrosive environments. to avoid circuit damage
  3. Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.)and the wireless charger, to avoid potential interference with the medical device.
  4. Please keep the wireless chargers away from children in order to avoid unnecessary accidents.

ATTENTION PLEASE

For your information, some models of phones can be charged through wireless chargers up to 70% – 80%, because phone manufacturers put special fuses for wireless charging mode. In this case please take it off for a while, and put it back on again, then it’ll charge the remaining amount.

WARRANTY

We provide warranty service in case the device does not work under normal use and identified by our company service commitment.
The manufacturer accepts no responsibility and the guarantee will not apply in the following conditions:

  1. Improper work of the wireless charger due to the user’s fault.
  2. manual disassembly of the device.
  3. Improper device repair in unauthorized services.
  4. Damage caused by the actions of the user.
  5. Malfunctions are caused by reasons beyond the control of the manufacturer such as power supply fluctuations, natural phenomena, natural disasters, fires, water-flood, and interference with foreign objects or liquids in the device.
  6. Inappropriate use of the appliance in any unforeseen way.

ENVIRONMENT PROTECTION FIRST!

Do not throw away the device with the normal household waste at the end of its life, but take it to the authorized recycler for disposal. By doing this, you help to preserve the environment.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part I 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals