Power Dynamics WS Series Indoor, Outdoor Wifi, BT Speaker Set Instruction Manual

: June 3, 2024
: Power Dynamics

Table of Contents

Power Dynamics WS Series Indoor, Outdoor Wifi, BT Speaker Set
INSTRUCTION
OVERVIEW
CONNECTION
DOWNLOAD AND INSTALL WIIM PLAYER APP
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Power Dynamics WS Series Indoor, Outdoor Wifi, BT Speaker Set

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

INSTRUCTION

Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage-carrying parts. Therefore, do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
For use in humid rooms or outdoors: refer to the installation guidelines for safe assembly.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
To prevent accidents in companies, you must follow the application guidelines and follow instructions.
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with a speaker inside which can cause a magnetic field. Keep this unit at least 60cm away from the computer or TV.
If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise, the battery may be permanently damaged.
If the battery is damaged please replace it with the same specifications battery. And dispose the damaged battery environment friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240VAC/50Hz. Check if the power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard. This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!

NOTE:
To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by the disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

Power switch
DC Power connector
Speaker output connector for passive speaker
Infrared receiver and LED indicator

Power ON / OFF
Short press for join the speaker group
Long press for exit the speaker group
No function
Volume UP
Volume Down
Previous
Play / Pause
Next
Switch UP for the predefined Channel
Switch Down for the predefined Channel
Short press for the switch to the BT plays mode. Long press for the switch to the BT pair mode
Short press to connect the speaker to the WIFI. Long press for restore to the factory settings
Switch between BT and WIFI

CONNECTION

Connect the DC adapter to the speakers and connect to the 110V~230V AC power. Then you can turn on power switch. The status indicator LED will be red and fast blinks, after about 10 seconds the speaker will sound a tone, it means the speaker is ready.

DOWNLOAD AND INSTALL WIIM PLAYER APP

Download the WiiM Player app via the Apple store or Google play.

WiiM Player Apple Store Power-Dynamics-WS-Series-Indoor,-Outdoor-Wifi,-BT-
Speaker-Set-fig-5

WiiM Player Google Play

Open the WiiM Player app on your smartphone, the APP will automatically search for speakers. And then you can follow the wizard step by step to complete the speaker settings, and check the last page of the manual.

TECHNICAL SPECIFICATION

	WS40A	WS50A
Ref.nr.	952.538	952.539
Output power MAX	200W	240W
Output power: RMS	60W	60W
Diameter tweeter	1/2”
Diameter woofer	4”	5.25”
Tweeter type	Mylar
Impedance	8 Ohm
Frequency response	100Hz – 20KHz	90Hz – 20KHz
SPL @ 1W/1m	87dB	89dB
IP rating	IPX5
Power supply	100-240VAC 50/60Hz
Dimensions per speaker	155x180x235mm	245x180x160mm
Weight	3.60kg	5.00kg