ROKU Video Doorbell and Chime Se User Guide

June 3, 2024
Roku

ROKU Video Doorbell and Chime Se logo

ROKU Video Doorbell and Chime Se

ROKU Video Doorbell and Chime Se product

What’s included

  • A Roku Video Doorbell SE
  • B Roku Chime SE
  • C Wall plate
  • D Wedge kit
  • E Extension wires (x2)
  • F Fuse
  • G Wire caps (x4)
  • H Bracket screws (x2)
  • I Screws (x2)
  • J Plastic anchors (x2)

What you’ll need

  •  Phillips screwdriver
  •  Your smartphoneROKU Video Doorbell and Chime Se 01
    ROKU Video Doorbell and Chime Se 02
    ROKU Video Doorbell and Chime Se 03
    ROKU Video Doorbell and Chime Se 04
    ROKU Video Doorbell and Chime Se 05
    ROKU Video Doorbell and Chime Se 06
    ROKU Video Doorbell and Chime Se 07
    ROKU Video Doorbell and Chime Se 08

Doorbell – FRONT

  1.  Microphone

  2. Lens

  3. Fill light
    Doorbell – BACK Chime

  4. Doorbell button

  5. Reset button

  6. Screw terminals

  7.  Setup button

  8. Status light

  9. Speaker

Let’s get started

  1. Download the Roku Smart Home app
    Scan the QR code below to download the Roku Smart Home app on your smartphone. Sign in with your Roku account or create one.
    Message & data rates may apply.

  2. Install your doorbell & chime
    In the Roku Smart Home app, tap the “+” button, then “Add Device” to find “Video Doorbell.” Follow the instructions to finish setup.ROKU Video
Doorbell and Chime Se 13

What’s that light mean?

Doorbell State
YELLOW – Solid Powered
YELLOW – Flashing Waiting for connections
YELLOW and BLUE – Flashing Connecting to router
BLUE – Flashing Connected to external network
BLUE – Solid Connected and working
Chime State
--- ---
YELLOW – Solid Powered
BLUE – Flashing Connected to network
BLUE – Solid Connected and working

FCC WARNING
Any change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING
Do not use the battery near a heat source. Do not use the battery near fire or an oven, or in an ambient temperature exceeding 80°C. Over-heating may cause an internal short-circuit, heat generation, smoking, deformation or burning. Wall mount (mounting height < 2m), tma is 50°C.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals