HAMMERHEAD Karo Holder 2 Mounting System Instruction Manual

HAMMERHEAD Karo Holder 2 Mounting System

Product Information

Specifications

• Brand: Hammerhead
• Model: Karoo
• Usage: Navigation aid and data recording device on bicycles
• Charging Port: USB-C

Product Usage Instructions

Intended Use

Karoo is designed to be used as a bike computer for navigation assistance and data recording on bicycles.

Charge Device Battery

1. Remove the USB-C cover.
2. Plug the included USB-C cord into the device charge port and a wall charger or computer.
3. Unplug the USB-C cord when the battery is charged to 100%.
4. Reinstall the USB-C cover.

NOTICE: Do not charge Karoo if water is present under the USB-C cover or in the USB-C charge port. Allow Karoo and the USB-C port to dry before charging. To avoid permanent damage to the battery, do not store the device at 0% charge. Charge the battery to 30% – 80% for long-term device storage (1 month or more). Check and charge the battery as needed, once per month.

Detailed Charging Instructions

1. Verwijder het USB-C-kapje.
2. Sluit de inbegrepen USB-C-kabel aan op de oplaadaansluiting van het apparaat en een wandlader of computer.
3. Ontkoppel de USB-C-kabel wanneer de batterij 100 % is opgeladen.
4. Breng het USB-C-kapje opnieuw aan.

MEDEDELING: Laad Karoo niet op als er water onder het USB-C-kapje of in de USB-C-laadpoort aanwezig is. Laat Karoo en de USB-C-laadpoort eerst drogen alvorens op te laden. Om permanente beschadiging van de batterij te vermijden, berg het apparaat niet op met een laadniveau van 0%. Laad de batterij op tot 30% – 80% voor een langdurige opslag van het apparaat (1 maand of langer). Controleer en laad de batterij op wanneer nodig, eenmaal per maand.

FAQ

Q: Where can I find additional product information?

A: Visit hammerhead.io/support for additional product information.

Q: How often should I charge the battery for long-term storage?

A: Charge the battery to 30% – 80% for long-term device storage (1 month or more) and check and charge the battery as needed, once per month.

Hammerhead Account and Compliance

Before Karoo can upload rides to your Dashboard automatically, visit dashboard. hammerhead.io/auth/signup to register your device and create your account.
For additional product information, visit hammerhead.io/support.
For warranty information, visit hammerhead.io/warranty.
For regulatory compliance, visit www.sram.com/hammerheadcompliance.
For Privacy policies, and Software Terms and Conditions, please, visit www.hammerhead.io/legal or scan the QR code below.

Intended Use

Karoo is a cycling computer intended to be used as an information display, navigational aid, and data recording device on bicycles.

Charge Device Battery

1. Remove the USB-C cover.
2. Plug the included USB-C cord into the device charge port and a wall charger or computer.
3. Unplug the USB-C cord when the battery is charged to 100%.
4. Reinstall the USB-C cover.

NOTICE

• Do not charge Karoo if water is present under the USB-C cover or in the USB-C charge port. Allow Karoo and the USB-C port to dry before charging.
• To avoid permanent damage to the battery, do not store the device at 0% charge. Charge the battery to 30% – 80% for long-term device storage (1 month or more). Check and charge the battery as needed, once per month.

Battery Life

Typical expected battery life ranges from 9 to 20+ hours. Battery life varies depending on the features used, sensor behavior, device age, and outside temperature.
For tips to maximize battery life visit hammerhead.io/support.

Power On and Getting Started

1. Press and hold the power button 2-4 seconds until the device turns on.

2. Complete each set up step as instructed.

3. Complete features tour. For additional instructions, visit hammerhead.io/support.

Start and End a Ride

1. Swipe to the preferred Profile from the Home Screen.

2. Tap on the yellow ‘Start Ride’ ► arrow icon, or the Bottom Right button, to start the ride.

3. To end and save a ride, tap the ▌▌, or press the Bottom Right button. This will pause the ride.

4. Tap the yellow ▦ icon or press the Bottom Left button. ARE YOU SURE YOU WANT TO END YOUR RIDE? Tap the yellow ▦ icon, or press the Bottom Right button to confirm.

Update Software

By default, software is updated automatically when connected to WiFi. If Auto- Download is disabled, updates can be downloaded manually:
From Home screen:
Menu » Settings » System Update » Check for Update (follow prompts if new version is available)

Buttons and Charge Port

1. Top Left
2. Top Right
3. Bottom Left
4. Bottom Right Start, Pause, Resume Ride (short press)
5. POWER

USB-C Charge Port/Cover

Install Mount

1. Unthread the clamp bolt (3 mm hex) and open the clamp.
2. Position the mount onto the handlebar and close the clamp.
3. Install and tighten the clamp bolt (3 mm hex).

Hammerhead Mounting System

• To install, slide the Karoo onto the mount until a click is heard. The click confirms that it is locked into place.
• To remove, firmly rotate the Karoo 15º left or right until a double-click is heard, then slide the device off of the mount.

Install Quarter Turn Adapter (optional)

• To install, slide the adapter into the underside of the device until a click is heard. The click confirms that it is locked into place.

• To remove the adapter, lift both tabs on the tail evenly and firmly push the adapter out of the device with your thumb.

World Headquarters
SRAM, LLC 1000 W. Fulton Market, 4th Floor Chicago, Illinois 60607 U.S.A.

© 2023 SRAM, LLC

References

• Karoo Dashboard
• Karoo Dashboard
• Hammerhead Karoo – The Most Advanced Yet Intuitive Cycling Computer
• Legal – Hammerhead

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>