NexTool NE20161 Outdoor 12 In 1 Thunder Music Flashlight User Manual
- June 3, 2024
- NexTool
Table of Contents
Please scan then watch the operation video
User manual of NexTool Outdoor
12 in 1 Thunder Music Flashlight
Please read this manual before using and keep it carefully
FEATURE
- Twelve in one practical multi-functional flashlight, white/red/green/ blues focus flashlight, Bluetooth speaker, music rhythm light, work light, camp light, sound atmosphere light, warning light, sound and light alarm, power bank in one.
- Full coverage of different life scenes-whether it is for car commuting, outdoor self- driving tour, or security defense, Thunder can meet the demand for light in time.
- The maximum brightness of the flashlight is 900 lm, and the farthest beam distance is 245 meters. The main lamp is equipped with high bright warm white, red, blue and green light.It adopts a Fresnel patented lens, telescopic focusing, and quick switching between spotlight and floodlight.
- With 360 degree adjust angle , the side lamp is functioning either as an illumination light or a warning light. With a magnetic fixing system and tripod, it frees your hands when being used.
- Equipped with wireless speaker and music atmosphere lamp, you can enjoy wonderful sound and light experience at any time.
- With the sound atmosphere lamp, you could feel the rhythm of music.
- High alarm plus strong light strobe, offers double guard against danger.
- It can be used as an emergency power bank to ensure the normal operation of the phone in emergencies.
SPECIFICATIONS
Measured Photoelectric Parameters| Brightness|
Run Time
| Beam
Distance| Water Resistance| Impact Resistance
---|---|---|---|---|---
Mode| Focusing Flashlight| White Light| 35lm~900lm| 2.4h~40h| 245m| IPX4| 1m
Red Light| 3lm~95lm| 3h~32h| —
Green Light| 6lm~160lm| 4h~48h| —
Blue Light| 0.5lm~20lm| 4h~45h| —
Slide Lamp| White Light| 5lm~145lm| 4h~45h| 12m
Colorful Light| —| —| —
Sound Atmosphere Lamp| —| —| —
Red Light| 1lm~4.5lm| 15h~30h| —
Red Flash Light| —| —| —
Speaker Alarm Mode| —| 3h| —
Dimensions| 173mm(L)×36mm(W)×43mm(H) ± 2mm
Weight| 246g± 5g（Battery included）
Material| Metal：6061 Aluminum Alloy
Plastic：ABS, PA66+30%GF, PMMA
Charge- discharge| Input: 5V 1A, charge time: ≈3.5h;
Output: 5V 1A, Rated Capacity: 1400mAh
Battery| 18650×1 (2600mAh 3.6V 9.36Wh)
Speaker KW| 4Ω2W
All the above parameters are tested strictly according to Q/GDBCY 015-2019 standards. The tested battery is 18650(2600mAh 3.6V 9.36Wh) lithium-ion batteries. Performance parameters may vary depending on test battery or environmental conditions.
STRUCTURE
- Charging Interface
- Magnetic Fixing System & Tripod Mount Connection & Direction Adjustable Holder
- Telescopic Focusing Lens
- Sound Atmosphere Lamp
- Music Pulse Lamp
- Diffuser
- Sound Alarm
- Wireless Speaker
- Discharge Interface
- Tail Switch
Play the music with the Wireless Speaker
- Long press the Music Button for 1.5 seconds and shows green light.
- Check your mobile phone Bluetooth Device and then connect to NexTool Thunder.
- It will shows Blue Light after successful connection. You could play music with wireless speaker.
- In the music mode, long press the button for 2 seconds and reset the wireless speaker connection.
INSTRUCTIONS
1.Turn On / Off
Press down the switch for 1.5s to turn on the light and then press down again
for 1.5s to turn off.
2.Flashlight Brightness Adjustment
Press the +/- button to adjust the brightness.
3.Flashlight Color Modes Adjustment
When using the flashlight, press the button to switch between different color
modes:
White→Red→Green→Blue
4.Side Lamp Brightness Adjustment
When the flashlight is in the normal state, double -click the button quickly
to switch between the Flashlight and Side Lamp modes.
5.Side Lamp/ Warning Lamp / Sound Atmosphere Lamp
In the Side Lamp mode, press the main switch continuously to switch between
White light→Colorful Graduated→Sound Atmosphere Lamp→Red Light→Red Flash Light
6.Music Mode Switch and Connection
Long press the music button for 1.5 seconds to start/close the music mode.
After startup, the side light of the device shows Green while it is not
connected to the audio source. The blue light will show after successful
connection, and the connection light will turn off after music is played.
7.Music Mode Pauses and Plays
You can pause or play the music by clicking the music button
8.Music Mode Switch Song
While playing the music, you can click the button to play the next song,
double click the button to play the last song.
9.Music Mode Volume Adjustment
Volume Adjustment: In the music mode Long press the +/- button to adjust the
volume of speaker.
10.Music Pulse Lamp
While playing the music, double click the music button to turn on/ turn off
the music pulse lamp.
11.Buzzer Alarm Mode
Long press the button for 3.5 seconds in any mode, you could turn on / turn
off the buzzer alarm mode. In Buzzer Alarm Mode, the flashlights and side
light all flashing alarm cycle (Flash three times to switch one color) with a
warning alarm.
12.Directly shutdown Mode
Long press the button for 4 seconds in any mode will directly shutdown the
flashlight.
13.Type-C Charging
Follow the turning marked to turn on the flashlight bottom until you see the
USB Type-C charging interface. Use the 5V 1A power supply or USB adapter with
the Type-C cable to charge the flashlight. (When charging, the indicator light
will be flashing red. It will be flashing red when it is full.)
- Charge/discharge indicator
14.Emergency Charger
Rated output capacity of USBA interface at normal temperature: 1400mAh (5V
1A). (The discharge indicator shows steady blue when the USBA starts
discharging, and turns off the discharge indicator 32 seconds after the USBA
stops discharging).
Turn on or USBA to discharge, the discharge indicator will light up. When the
blue discharge indicator blinks, it will be a warning of low power. Please
charge the flashlight in time.
SAFETY CAUTIONS
- When the light is stained with sea water or corrosive articles please clean and dry promptly.
- The battery of this product contains lithium-ion cell. It is strictly forbidden to take apart the battery shell without permission to avoid possible damage to the cell or other hazards;
- It is strictly forbidden to disassemble, squeeze, puncture, short-circuit this product, throw it into a fire or expose it to an environment with a temperature higher than 60°C;
- Due to the strong light of the flashlight, please do not let children play with it and do not irradiate on human eyes to avoid harm to the eyes
WARRANTY
This warranty policy is a legal document we manufacturer provide for our end user, stipulating warranty services and other related matters. Please keep it properly. If the retailer or other third party whom you buy the product from declares that it will provide warranty service or other more services, the warranty service or other services will be provided by the retailer or third party.
1. Instruction
This warranty service is only applicable to the product or its parts that meet
the factory configurations during normal use within the warranty period when
there is a performance failure within the warranty scope. The definition of
performance failures within the warranty scope, if the country has relevant
regulations, shall be based on national regulations; if there are no
regulations, we will determine it in accordance with this warranty policy.
2. Warranty period
The warranty period is one year from the date of delivery of the product. The
delivery date of online, telephone or other off-site transactions is the same
as delivery date recorded by the third-party logistics; in other cases, the
invoice date should be regarded as delivery date, but if you can effectively
prove that the invoice date is earlier than the actual delivery date and it is
not caused by your end, the actual delivery date shall prevail with our
confirmation. If you are unable to provide valid third-party logistics
delivery information or invoices, the warranty date will be calculated from 30
days after the product leaves the factory. Please see the warranty card for
the specific warranty period and other matters.
3. How to access to our services
Below optional methods for you to contact us for warranty service:
A. Service hot-line: 86 – 662 – 369 2722
B. Contact the selling platform where you buy the product.
For warranty application, please submit clear, complete and correct documents
including ① invoice；② warranty card；③Order information on E-commerce platform
（if applicable）.
If you cannot provide above proofs indicating the source of the product, you
will not be able to obtain warranty service.
4. Warranty policy
1). Within 7 days since the start of the warranty period, if the product has a
performance failure, and it is confirmed by us or our authorized after-sales
service center, you can enjoy the return or replacement service for free. For
replacement product, the warranty period will be recalculated.
2). Within 8-15 days since the start of the warranty period, if the product
has a performance enjoy failure, and it is confirmed by us or our authorized
after-sales service center, you can free replacement or repair services. For
replacement product, the warranty period will be recalculated.
3). Within 12 months since the start of the warranty period, if the product
has a performance failure, and it is confirmed by us or our authorized after-
sales service center, you can enjoy free repair or component replacement
services. The repaired product or product with replaced components will
continue to enjoy the warranty service during the remaining of the original
product. If the remaining warranty service period is less than 3 months when
warranty period the repair or component replacement occurs, the remaining
warranty period will be extended to 3 months.
4). When return or replacement is required, the product should be in original
condition in complete packaging. The main product itself as well as all the
accessories should be without any damage, scratches or breakage. For repairs,
new components become part of your product, and the components replaced should
be returned to us.
5). For product hardware failures within scope of warranty, we will bear the
logistics costs as well as other costs incurred by the warranty. For the
failures or damages that are confirmed not in the coverage of warranty, unless
otherwise specified at that time, you shall bear the round-trip freight (if
any) and the risks in the transportation process.
5. Non-warranty coverage
Warranty will not be applicable under following occasions:
1). Failures or damages caused by improper physical or operating environment,
force majeure, improper maintenance or storage, such as misuse, accident,
modification, private dismantling, liquid intake, etc.
2). Unauthorized organization or personnel dismantle or repair without our
authorization;
3). Discoloration, wear and consumption during use;
4). The relevant labels and marks of the products or parts are changed or
removed, such as: the product information or serial number on the warranty
certificate does not match the actual product, or has been altered;
5). Components with obvious damages by hard objects, scratching marks, broken
corners, severe deformations and other breakages.
6). Warranty period expires.
6. Paid services
For product failures beyond the warranty period or outside the scope of the
warranty service, we will provide paid professional repair services if it is
confirmed within our service scope. With your knowledge and agreement, the old
components replaced will be recycled when repaired. Unless expressly agreed
otherwise, we will provide a 90-day warranty for the repaired or replaced
components.
7. General terms
This service policy applies to the laws of mainland China (excluding its
conflict laws). If any dispute arises due to the matters under this document
and the friendly negotiation fails, it will be submitted to the People’s Court
with jurisdiction in Jiangcheng District, Yangjiang City for ruling.
WARRANTY CARD
Product Description| Name| | Model#|
---|---|---|---|---
User Information| Name| | Phone|
Address|
Retailer Information| Address| | Phone|
Address/Website|
Sale date| | Invoice#|
For after-sales service needs, please contact the customer service department
After-sales service phone: 86 – 662 – 369 2722
Business hours: Mon. to Sun. 8:00-17:15
Manufacturer: BINOVO MANUFACTURING CO., LTD.
Address: B9-3 Yinling Science and Technology Park, Jiangcheng, Yangjiang,
Guangdong, China
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>