dlink DAP-2662 Nuclias Connect AC1200 Wave 2 Access Point Instruction Manual

dlink DAP-2662 Nuclias Connect AC1200 Wave 2 Access Point Instruction

Manual

Revision History and System Requirement:

1.00r019

1.01r029

| 2019/12/02

2020/07/06

| DAP-2662| A1

Upgrading Instructions:

DLink AP supports firmware upgrading via Web UI . You may download the firmware from D Link web site http://tsd.dlink.com.tw Please also

1. M ake sure y our DAP 26 62 has a manually assign ed static IPv4 address or get a valid IPv4 address from DHCP server befor e upgrad ing FW
2. Do not power off your DAP 2662 when FW upgrading.
3. U p grade to the intermediate FW DAP 2662_firmware_v1.05p02r081.bin ) first and then upgrade to FW DAP 2662_firmware_v1.05r083.bin

Upgrading by using Web UI

1. Connect a workstation to the LAN port of Access Point.
2. Open the web browser of workstation and entering the IP address of the AP . The system default IP address setting is dynamic ip, and you can enter http://dap2662.local to login, if it c annot get ip address from DHCP server, it’s ip address will back to 1 92.168.0.50
3. Enter administrator’s username and password, username and password are admin by default
   To update the AP ‘s firmware, click Maintenance Firmware and SSL Certification Up load F W upgrade step s
   i. U p grade intermediate FW –> “DAP 2662_firmware_v1.05p02r081.bin”
   ii. Up grade to FW –> “DAP 2662_firmware_v1.05r083.bin”

New Features:

1. Supporting Fast roaming with DNC
2. Supporting Social Login with DNC
3. Add session management across AP
4. Support FOTA firmware upgrade.
5.  Add 2 countries Slovania and Kosovo
6. Supporting Captive Portal Radius Accounting
7. Support IPv6 SNMP setting
8. Support User list upload with DNC
9. Support NAS ID Discovery with DNC
10. Support Wall Garden with DNC

Changes of MIB & D-View Module: None

Problems Fixed:

1.05r083

| 1.        Fix session timeout issue (When client disconnect manually and reconnect before session expire, so no captive portal is performed), of client having infinite session time.

2.        Fix captive portal [radius authentication] failure and its session timeout issue.

3.        Fix captive portal [ldap] faiulre and its session timeout issue.

4.        Fix captive portal [user/password] and its session timeout issue.

5.        Fix captive session timeout not working if session time is not specified.

6.        Fix session time lost during ‘check table’ operation

7.        Fix iPhone cannot perform social login issue.

8.        Fix standalone user account not working issue.

9.        Fix session not timeout after expire.

10.     [D-Track] Allow 0 and 255 for the last digit of IP Address and Gateway Address

11.     [D-Track] Fix AP reported incorrect value for Fixed Channel, Fixed Power, Current Channel, Current Power, causing JSON format error, resulting in preventing device from boarding failed.

12.     [D-Track] AP cannot boarding even with Internet Access.

13.     [D-Trak] WPA-Enterprise is used when WPA-PSK only is set

 | 14.     [D-Track] DNA 4.0.0.19 discovers DAP, but can’t change IP/update firmware or other settings

15.     [D-Track] Following password cannot be set.

16.     [D-Track] Fix QoS and Bandwidth limit has no effect issues.

---|---

Known Issues:

1.05r083

| If Manager by DNC use domain, The HTTP packets of Redirect 302 should be domain name rather than DNC IP address when CP is passcode.

Related Documentation:

DAP-2662 manual v1.00

Read More About This Manual & Download PDF:

References

• D-Link | Technical Support | Downloads
• D-Link | Technical Support | Downloads

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>