PURGEAR STC-100A Digital Thermostat User Guide

PURGEAR STC-100A Digital Thermostat

STC-100A thermostat controls the input power supply status of a heater or a cooler.

Wiring Diagram

Function Menu

Set the Aimed Temp Range

• The aimed temperature range consists of two parts: “SP” as the bottom line and “SP + d ” as the top line, So, you need to set both the “SP” and the “ d.”

Set the “SP” value

• Press the key to see the SP value;
• Press the or key to change it;
• Press the key to save new data.
• If you found the “SP” cannot reach your ideal value, you must first change the range limitation ( LS & HS )..

Set the “Hysteresis” Value?

• Hold the key for 3s. You will see the code HC.
• Next, press the direction key to find the “ d.”
• Press the key to see the current value and press the direction key to change it.
• At last, press the key to save the new data.

This is not a step-by-step user manual; It just shows the key points. The new user should read the Full-Content Version User Manual

Haswill Electronics

• STC-100A Thermostat
• Copyright Haswill-Haswell All Rights Reserved

References

• Haswill Electronics - An exporter of digital temperature devices from China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>