BRAUN 0128806002 CareStyle Compact Pro Steam Ironing Station User Manual
- June 4, 2024
- Braun
Table of Contents
BRAUN 0128806002 CareStyle Compact Pro Steam Ironing Station
Before use
Please read instructions carefully and completely before using the appliance.
Caution: Due to the high power of this appliance please make sure that your mains supply is sufficient. Please contact your local electric power company to make sure that the so called mains impedance is not higher than 0,404 Ohm.
Description
- Mode button
- Eco mode indicator
- iCare mode indicator
- Turbo mode indicator
- Vertical refresh mode indicator
- Clean button/Clean system LED
- Steam button
- Lock system
- Double cord/Storage
- Power cord/Storage
- Removable water tank
- Iron rest
- Heel rest
- Cleaning vessel
Intended use
The appliance must be used only for ironing garments which are suitable for ironing according to the care label. Never iron or dampen garments while wearing them.
Filling the water tank
(for details refer to fi g. A)
Make sure the appliance is plugged off . You can refi ll the water tank at any
time during use.
This appliance has been designed to be used with tap water. However, if you
live in an area with hard water, we recommend that you use either distilled
water or demineralized water to prolong the lifetime of the appliance. Do not
use condensation water from a tumble dryer.
Start into Operation
(for details refer to fig. B)
Before starting to iron follow the garment care label instructions carefully.
Fabrics with this symbol are not ironable.
For best ironing results, after ironing with steam, perform the last strokes
without steam.
Before First use (for details refer to fig. B)
When steam is ready for the fi rst time we recom-mend to iron for a few minutes
over a rag to avoid manufacturing residues can dirty your garments.
Settings
(for details refer to fig. C)
iCare
The iCare mode is automatically chosen when the appliance is plugged in.
It is suggested for garments like wool, polyester and cotton/linen.
By pressing the mode button (1), the other 3 settings appear in the following
order:
turbo + (max. steam) +
It is suggested for garments that need more powerful steam, like thick
cotton/linen and jeans.
Vertical Refresh
Ideal for quickly refreshing both curtains and hanging clothes. Fast and easy
touch-ups even without the ironing board.
Note: Each time you select the vertical refresh mode, the pump produces some subtle rattling noise. This is normal.
eco
It is suggested for most delicate garments like synthetics, silk and blended
fabrics. This mode allows less power consumption.
Iron Auto-Off
(for details refer to fig. D)
This function is activated if after 10 minutes there has been no steam emission.
- When the iron is in the auto-off mode, the icon related to the selected setting starts flashing.
- The iron will turn off to reduce power consumption.
- To continue ironing, press the mode, clean or steam button.
Before starting to iron again wait until the related icon for the setting is permanently on.
Descaling
(for details refer to fig. E)
The system will remind you to descale it regularly independent of the type of
water used. Descaling can be performed at any time needed even when not
indicated by the system.
If the clean LED (6) and the acoustic signal turn on during an ironing
session, it is possible to continue ironing. There is no need to perform
the cleaning immediately. The cleaning procedure can be performed when the
ironing session has been fi nished or next time the appliance is switched on.
If the appliance is switched off without having performed the cleaning process,
the clean LED and acoustic signal will turn on again when it is next switched
on. In case the steam emission
is deactivated the cleaning procedure must be performed in order to proceed
steam ironing.
Caution: Do not leave the appliance unattended during the descaling
process.
Always perform the descaling process with the cleaning vessel (14). Do not
interrupt the process by lifting the iron up from the cleaning vessel, as hot
water and steam will come out of the soleplate.
Caution: The cleaning vessel can be hot and contains hot water, take care while moving and emptying it.
Settings
(for details refer to fig. F)
-
Care & Cleaning
Before cleaning, always make sure that the appliance is unplugged and has cooled down completely. -
Lock System
The appliance is equipped with a lock system (8) for convenient transportation and easy storage. It is possible to lift and carry the appliance on the handle of the locked iron.
NOTE: Before transportation make sure the iron is properly locked and has cooled down completely. -
Storage
Unplug and let the appliance cool down (the soleplate is hot) before winding the cords for storage (9,10).
Warranty and Service
For detailed information see separate warranty and service leafl et or visit www.braunhousehold.com.
For UK Only
Guarantee Information
All Braun Household products carry a minimum guarantee period of two years.
The rights and benefi ts under this guarantee are additional to your statutory
rights which are not aff ected.
Please keep your receipt as this will form the basis of your guarantee.
In the unlikely event of a breakdown you have access to professional help from
our team simply by calling: 0345 222 0458
For service in the Republic of Ireland please call: 012475471
Braun Household undertakes within the specifi ed period to repair or replace any part of the appliance, free of charge (with the exception of any glass or porcelain-ware incorporated in the product) found to be defective provided that;
- We are promptly informed of the defect.
- The product is used and maintained in accordance with the User Instructions.
- The appliance has not been altered in any way or subjected to misuse or repair by a person other than an authorized service agent for Braun Household.
- No rights are given under this guarantee to a person acquiring the appliance second-hand or for commercial or communal use.
- Any repaired or replaced appliance will be guaranteed on these terms for the unexpired portion of the guarantee.
- The need for repair has not been caused by insuffi cient aftercare or cleaning: or damage caused by the chemical or electrochemical
effects of water.
Under no circumstances shall the application of this guarantee give rise to
the complete replacement of the appliance or entitle the consumer to damages.
Braun Household, New Lane, Havant,
Hampshire PO9 2NH
www.braunhousehold.co.uk
Thank You for choosing Braun. We are confi dent that you will get excellent
service from this product.
TO IMPROVE YOUR EXPERIENCE
Register now at www.braunhousehold.co.uk
By registering we may send you from time to time details on exclusive off ers,
promotions, recipes and inside tips.
Troubleshooting guide
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|
The iron does not produce any steam
| When starting your ironing session, the steam button has not been pressed
long enough| Press and hold the steam button until steam comes out. It may
take up to 30 seconds until steam comes out
There is not enough water in the water tank| Fill the water tank
If the clean system LED turns on, the steam function has been disabled until
you have performed the cleaning process| ****
Perform the cleaning process (see dedicated chapter)
The iron is heating up
| When the selected mode indicator LED is flashing, the iron is heating up; during this phase the steam function is disabled. Wait until the LED turns permanently on.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>