TRR2F KINGSMITH WalkingPad Treadmill User Manual

June 4, 2024
WalkingPad

TRR2F KINGSMITH WalkingPad Treadmill User Manual

TRR2F KINGSMITH WalkingPad Treadmill.jpg

Model: TRR2F

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Important safety instructions

The appliance is intended for residential use.

DANGER – To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

  1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
  2. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons
  3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
  4. Never operate this appliance if it has a damaged cord or plug, if it’s not working properly, if it’s has been dropped or damaged, or dropped into water. Return the appliance to a service centre for examination and repair.
  5. Do not carry this appliance by supply cord or use cord as a handle.
  6. Keep the cord away from heated surfaces.
  7. Never drop or insert any object into any opening.
  8. Do not use outdoors.
  9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
  10. To disconnect, turn all controls to the off position, then remove plug from outlet.

****WARNING

  1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  2. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

WARNING – always keep young children away from this machine. Contact with the moving surface may result in severe friction burns.

Welcome!
Thanks for choosing KINGSMITH WalkingPad Treadmill, and hereinafter referred to as “the Treadmill”. The exquisite, simple, and innovative design afford quality and enjoyable workouts at home. This Treadmill is designed for residential use only. Please do not use it for any commercial, leasing, or public group purpose.

FIG 1 Specification.JPG

Product and accessories

Please check carefully if the items inside the packaging are complete and intact. In case of any item missing or it’s broken, please contact the seller.

Accessories

FIG 2 Accessories.JPG

Functional diagram

1. Walking mode
The handrail is horizontal when the Treadmill is in walking mode. The maximum speed in this mode is 6 km/h. In this mode, manual (M) and automatic (A) modes can be used. It has a speed limit of 3 km/h when the Treadmill is used for the first time. Unlocking the speed limit of 6 km/h can be done in three ways: Finishing beginner guidance on the KS Fit APP, walking on the Treadmill for 1 km, setting the speed limit on the “KS Fit” APP.

FIG 3 Walking mode.JPG

2. Running mode
The handrail is vertical when the Treadmill is in running mode. The maximum speed in this mode is 10 km/h. In this mode, the manual (M) mode can be used. For safety reasons, running mode does not support automatic mode (A).

FIG 4 Running mode.JPG

3. Display panel function

FIG 5 Display panel function.JPG

  • Step and Calories data can be displayed on the panel after being set in the APP.

Touch keypress

FIG 6 Touch keypress.JPG

Indicator light

FIG 7 Indicator light.JPG

4. Remote control

FIG 8 Remote control.JPG

FIG 9 Remote control.JPG

Set-Up guide

1. When moving Treadmill, make sure that all the locking devices on the handrail are locked and fixed. Put the Treadmill on a flat and firm surface. Avoid soft or thick carpets.

2. Loosen the handrail locking device, lift the handrail to a vertical position, tighten the locking devices on both sides of the handrail.

3. Unfold the Treadmill, adjust the walking belt to the centre position, slowly unfold it and press it down to make it completely flat, or rotate the bottom foot cushion for levelling.

4. Loosen the handrail quick mounting device, adjust it to the handrail scale mark, and then lock the handrail quick mounting device.

5. Install the emergency stop switch. Connect the power supply and turn on the power switch.

6. Download “KS Fit” APP from the Apple Store or Google Play Store and complete installation.

7. Open APP, follow the instructions to add and connect the Treadmill, then the Treadmill is ready to use.

Learn to use the Treadmill

1. Mode description

FIG 17 Mode description.JPG

2. Standby mode control description

Standby mode
Under standby mode, users can press the mode button on the remote control briefly to wake up the Treadmill and switch to the default manual mode.

Users can also touch the icon on the display panel to wake up the Treadmill.

When the Treadmill is not in use, press the mode button on the remote control or touch standby icon on the display panel to switch to the standby mode.

Remote Control Diagram
Short press: Mode switch
Long press: Switch to standby mode (non-operational state)

3. Manual mode control description (primary mode)

Manual mode
In this mode, users can use the remote control to control the Treadmill. Beginners are advised to use the manual mode first, and then use the automatic mode once skills have increased.

FIG 19 Manual mode.JPG

4. Automatic control mode description

Automatic
This mode is difficult to control and can be used to completely without the remote control. It is advised to use this mode only after having gain experience.

Use the remote control to start and stop the Treadmill, and the switch mode button is effective under this mode.

Note: The automatic control mode is only available under walking mode.

FIG 20 Automatic control mode description.JPG

5. Remote control paring instructions
If the remote control does not respond or you must replace it, you need to pair it again. Pairing method: Restart the Treadmill and press and hold the mode button on the remote control at the same time for 5 seconds.

6. Connection caution light
Not Connected to APP: Will flicker Connected to APP: Off

7. Fault caution light

FIG 21 Fault caution light.JPG

Safety instruction

FIG 22 Safety instruction.JPG

FIG 23 Safety instruction.JPG

FIG 24 Safety instruction.JPG

FIG 25 Safety instruction.JPG

FIG 26 Safety instruction.JPG

FIG 27 Safety instruction.JPG

FIG 28 Safety instruction.JPG

Maintenance and adjustments

FIG 29 Maintenance and adjustments.JPG

3. Walking belt lubrication

  • Disconnect all sources of power before cleaning the Treadmill.

  • Add a small quantity of mild cleaner to a 100 % cotton cloth. Do not spray the cleaner directly on the walking belt or use acidic and corrosive cleaner.
    After a period of exercise, dust and stains may appear on the rear floor. This is normal and can be simply wiped.

  • Simultaneously press and hold both Mode Button and Speed Increase Button on the remote control for over 3 seconds until device start.

  • Front panel will show “CALI” and keep running with speed 3 km/h (2mi/h).

  • When walking belt goes to the left: Turn the left adjusting hole screw clockwise by ¼ turn.

  • When walking belt goes to the right: Turn the right adjusting hole screw clockwise by ¼ turn.

  • When walking bet is slipping: Turn the left and right adjusting screws clockwise for ½ turn at the same time.

  • After each adjustment, the Treadmill needs to run for 1-2 minutes to verify the adjustments. Please adjust again if necessary.

  • Power off the Treadmill and unplug the power cord.

  • Lift the edge of the walking belt and smear the inner surface with silicone oil.

  • Start the treadmill to run at a speed of 3 km/h (2 mi/h) for 10-20 seconds.

  • 5-10 ml of silicone oil is required for each lubrication. Excessive silicone oil may cause slipping and affect normal use.

  • Lubricate the walking belt every three months.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals