ZEBRA ZT231 Industrial Printer User Guide
- June 4, 2024
- ZEBRA
Table of Contents
ZEBRA ZT231 Industrial Printer
Install the Printer Driver
| The driver MUST be installed before connecting the printer to the computer,
or it will cause complications. If your Microsoft Windows-based computer does
not have the driver installed for this printer, download it from
zebra.com/zt231-info and install it before
continuing.
---|---
Go to zebra.com/zt231-info and install the driver for your printer.
Remove the Printer from the Box
Verify that you have the items shown.
Save the box and packaging materials in case you need to store or ship your printer in the future.
Connect the USB Cable
a – Remove the port blocker label
b – Connect the USB cable to the printer and your computer
Plug the Printer into an Electrical Outlet
Turn on the Printer Power
Open the Media Cover
Release the Printhead Assembly
Rotate the printhead latch (a)
to release the printhead assembly (b).
Remove Damaged Labels
Load Media
a – Fold down the media guide.
b – Hang the roll of media on the media hanger.
Fold up the media guide, and then slide it in until it almost touches the edge
of the media.
Feed the media as shown:
a – Under the black media dancer
b – Inside the gap sensor
c – Under the inner media guide
Adjust the outer media guide until it almost touches the edge of the media.
Load Ribbon
Place the ribbon on the ribbon supply spindle as shown. Push the roll back as
far as it will go.
Place an empty core on the ribbon take-up spindle as shown. Push the core back
as far as it will go.
Feed the ribbon as shown.
Wrap the ribbon around the core several times, and then rotate the spindle to tighten and align the ribbon.
Support and information
View user documentation and how-to videos.
|
View Quick Answers and Knowledge Base.
---|---
|
Join Community Connection of Zebra users and ambassadors
Learn about genuine Zebra supplies.
|
Contact Zebra about your printer
|
Prepare for Printing
Rotate the printhead lever down to close the printhead.
Press PAUSE.
– The printer auto-calibrates and several labels feed.
– The ribbon tightens and aligns on the printhead.
Close the media cover.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies
Corp., registered in many jurisdictions worldwide. All other trademarks are
the property of their respective owners. © 2022 Zebra Technologies Corp.
and/or its affiliates. All rights reserved.
Documents / Resources
|
ZEBRA ZT231 Industrial
Printer
[pdf] User Guide
ZT231, Industrial Printer, ZT231 Industrial Printer
---|---
|
ZEBRA ZT231 Industrial
Printer
[pdf] User Guide
ZT231 Industrial Printer, ZT231, Industrial Printer, Printer
|
ZEBRA ZT231 Industrial
Printer
[pdf] Instruction Manual
ZT231 Industrial Printer, ZT231, Industrial Printer, Printer
References
- Zebra Printer Setup Utility Support & Downloads | Zebra
- Zebra Support Community
- PrintSecure | Security Software | Zebra
- Printer Profile Manager Enterprise | Zebra
- Zebra Support Community
- Zebra Customer Community
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>