securitybrand Edge-E3 27-230HID Smart Keypad and Card Reader with Secura Key Proximity Reader User Manual

Securitybrand Edge-E3 27-230HID Smart Keypad and Card Reader with Secura

Key Proximity Reader

QUICK START GUIDE

1. Unpack the box and make sure you have all items shown here. (Screwdriver not shown.)
2. Unlock and open the front panel of the unit for mounting, wiring, and setup.
3. Mount unit to pedestal using included mounting hardware. (This step may be completed later.)

What’s what

All important components labeled

Connect wires

Feed wires through the back of the unit, and connect as shown using included screwdriver.
Excessive force can damage the unit.

Edge Power, Relay, Event Terminals
Gate Operator / Door Opener
Connect wires to the unit as shown in Step 4.
Connect wires to your power source, making sure you connect positive to positive and negative to negative.
They close the front panel of the unit and lock it.
Add Access Code to Relay A.
(To add multiple codes, enter each of them before pressing the pound key.)
NOTE: The green arrow indicates a “good” tone on the Edge unit. By default, the following codes are reserved and cannot be used: 1251, 1273, 1366, 1381, 1387, 1678, 1752, and 1985.

Make sure the gate or door path is clear; then enter the access code on the keypad, and confirm the gate or door opens.

Event Inputs
Wiring for accessories such as a request-to-exit device

Edge Power, Relay, Event Terminals

Digital Inputs
Wiring to various accessories

Edge Digital Input Terminals

Wiegand Device
Wiring for a Wiegand device

Downloading the Edge Smart Keypad App for iOS/Android

• Grab your smartphone or tablet. (These steps are optional. Unit can be fully programmed from keypad.)
• Navigate to your app store, and search for “edge smart keypad.”
• Find the Edge Smart Keypad app by Security Brands, Inc. and download it.

Pairing Edge Unit

Connecting your mobile device to your Edge unit for use with app.
The app is available for administrators who want to use it. Nearly all functionality is available through direct programming via the keypad.

• IMPORTANT:  Make sure your Edge unit is powered on and that Bluetooth is enabled on your mobile device or pairing will not work.

• Step 1 – Grab your mobile device and open the Edge Smart Keypad app.
  If you do not have the app, follow the steps on this page for downloading it.

• Step 2 – Fill out your account information and tap the “Sign Up” button.
  If you have already created an account, you will log in instead.

• Step 3 – On the Paired Keypads screen, tap the “Add Keypad” button.

• Step 4 – On the Add Keypad screen, tap the Edge unit you want to pair.
  If you do not see any Edge units listed, make sure your Edge unit is powered on and is in Bluetooth range.

• Step 5 – Complete the procedure shown on your mobile device. These steps will be completed using the PIN pad on your Edge unit.

• Step 6 – Enter the Master Code (default is 1251) on your mobile device.

• Step 7 – Enter the code shown on your mobile device at the Edge unit. This step must be completed within the time duration displayed.

• Step 8 – Change your Master Code if you like.
  This step is recommended, but optional, and can be done at a later time.

Your new Edge unit is now be paired and will appear on the Paired Keypads screen. Tapping on the Edge unit on this screen will give you access to relay control and full access control management of the Edge unit from within the app.

Direct Programming / Unit Configuration

Change Master Code
(Highly recommended for security purposes)
Change Sleep Code

Programming Sub Modes

1. Add Access Code(s) to Relay A
2. Delete Code (Non-Wiegand)
3. Change Master Code
4. Add Latch Code to Relay B
5. Change Sleep Code
6. Change Code Length (Non-Wiegand)
7. Change Relay Trigger Time
8. Enable/Disable Timers and Schedules
9. Enable/Disable “3 Strikes, You’re Out”
10. Configure Event Input 1
    • Add Latch Code to Relay
    • A Configure Wiegand Inputs
    • Add Access Code(s) to Relay B
    • Add Limited-Use Code
    • Delete All Codes and Timers

Change Code Length
IMPORTANT: THIS WILL DELETE ALL NON-WIEGAND ACCESS AND LATCH CODES.

Change Relay Trigger Time
Enable/Disable Timers and Schedules
Enable/Disable “3 Strikes, You’re Out”
(When enabled, the unit will sound an alarm and go into a 90-second lockdown for 90 seconds when an incorrect code is entered three times.
Toggle Silent Mode
(Toggles Silent Mode, which mutes all audible-tone feedback on unit)

Configure Event Input 1

(Allows an external device to affect keypad operation or trigger a relay. To configure additional inputs, use the Edge Smart Keypad app.)

Mode 1 – Remote Open Mode
Triggers either Relay A or Relay B when event input state changes from normally open (N/O) to normally closed (N/C).
Mode 2 – Log Mode
Makes log entry of event input state when event input state changes from normally open (N/O) to normally closed (N/C).
Mode 3 – Remote Open and Log Mode
Combines Modes 1 and 2.
Mode 4 – Arming Circuit Mode
Enables either Relay A or Relay B when event input state changes from normally open (N/O) to normally closed (N/C). Otherwise, selected relay is disabled.
Mode 5 – Remote Operation Mode
Triggers or latches either Relay A or Relay B when event input state changes from normally closed (N/C) to normally open (N/O).
Mode 0 – Event Input 1 Disabled

Modes 1, 3, and 4

Mode 2
Mode 5
Disable Event/Digital Inputs (Mode 0)
Configure Wiegand Input
(Allows enabling or disabling of a Wiegand input and configuration of the Wiegand device type. For the tag reader type, use the Edge Smart Keypad app.)
Change Default Facility Code

Direct Programming / Onboard Keypad

Add Access Code(s) to Relay B
(To add multiple codes, enter each of them before pressing pound key)
Add Latch Code to Relay A
Add Latch Code to Relay B
Delete Code (Non-Wiegand)
Add Limited-Use Code
(Access codes can be given a use or time restriction. For more advanced time restrictions, use the Edge Smart Keypad app.)

G1 Direct Programming External Wiegand Keypad

Add Wiegand Keypad Access Code(s)
(Uses default facility code; to add multiple codes, enter each of them before pressing pound key)

On Both Wiegand Inputs
On Wiegand Input 1 or 2
Add Wiegand Keypad Manager Access Code(s)
(Uses default facility code; to add multiple codes, enter each of them before pressing pound key)

On Both Wiegand Inputs
On Wiegand Input 1 or 2
Add Wiegand Keypad Latch Code(s)
(Uses default facility code; to add multiple codes, enter each of them before pressing pound key)

On Both Wiegand Inputs
On Wiegand Input 1 or 2
Delete Wiegand Keypad Code(s)
(Uses default facility code; to delete multiple codes, enter each of them before pressing pound key)

On Both Wiegand Inputs
On Wiegand Input 1 or 2

Direct Programming Wiegand Card Reader

Add Wiegand Card/Remote/Vehicle Tag Access Code(s)
(To add multiple codes, enter each of them before pressing the pound key)
Bulk Add Wiegand Card/Remote/Vehicle Tag Access Code(s)
Add Wiegand Card/Remote/Vehicle Tag Latch Code(s)
(To add multiple codes, enter each of them before pressing the pound key)
Add Wiegand Card/Remote/Vehicle Tag Manager Access Code(s)
(To add multiple codes, enter each of them before pressing the pound key)
Bulk Add Wiegand Card/Remote/Vehicle Tag Manager Access Code(s)
Delete Wiegand Card/Remote/Vehicle Tag Manager Code(s)
(To add multiple codes, enter each of them before pressing pound key)
Bulk Delete Wiegand Card/Remote/Vehicle Tag Code(s)

Documents / Resources

| securitybrand Edge-E3 27-230HID Smart Keypad and Card Reader with Secura Key Proximity Reader [pdf] User Manual
Edge-E3 27-230HID Smart Keypad and Card Reader with Secura Key Proximity Reader, Edge-E3 27-230HID, Smart Keypad and Card Reader with Secura Key Proximity Reader, Edge-E3 27-230HID Secura Key Proximity Reader, Edge-E3 27-230HID Proximity Reader
---|---

References

• Edge - Security Brands, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>