COSTWAY 4 ft. Pre-lit Spiral Snowy Artificial Christmas Tree Instruction Manual

COSTWAY 4 ft. Pre-lit Spiral Snowy Artificial Christmas Tree

HARDWARE

NOTE:
Please remove the circular protector caps on the end of each pole before assembling. If the caps were broken, It will not affect the use of.

Tree Parts

1. TOP SECTION OF THE TREE
2. BOTTOM SECTION OF THE TREE
3. BASE

ASSEMBLY OF THE BASE

1. TAKE OUT THE BASE
2. ASSEMBLE THE BASE
3. INSERT THE TREE
4. POUR SAND OR SOIL TO INCREASE THE WEIGHT AND STABILITY OF THE BASE

TREE ASSEMBLY

1. TAKE OUT THE TREE
2. SPLICING
3. OPEN BRANCH
4. OPEN THE TOP OF THE TREE
5. FINISH

PRODUCT ASSEMBLY

Caution

• Firmly secure all screws before use.
• The product is intended for indoor use only.
• Do not place this tree in a wet location.
• This seasonal product is not intended for permanent installation or use.
• Do not use or store this item in the proximity of open flame, flammable/combustible chemicals, or other strong heat sources.
• If any parts are missing. broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
• Do not use this item in a way that is inconsistent with the manufacturer’s instructions as this could void the product warranty.

CLEANING & STORAGE

• Store this tree in a cool and dry place away from heat and moisture.
• Before putting this tree in storage, do the following.
  • Completely remove all decorations.
  • Clean the tree with a slightly damped cloth and let it dry naturally.
  • Raise all branches to their original upright position, and make sure not to damage any branches in the process.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>