Nikon NIKKOR Z DX 18-140mm f/3.5-6.3 VR User Guide

: June 4, 2024
: Nikon

Nikon NIKKOR Z DX 18-140mm f/3.5-6.3 VR

Read this document thoroughly before using the product.
To ensure proper use of the product, be sure to read “For Your Safety” (page 4).
After reading this document, keep it readily accessible for future reference.

Introduction

Before You Begin

Before using this product, please read these instructions carefully. You will also need to consult the documentation provided with the camera.

This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.
Update the camera firmware to the latest version. With earlier versions, the camera may fail to detect the lens correctly and some features may not be available. The latest version of the camera firmware can be downloaded from the Nikon Download Center at the URL below. https://downloadcenter.nikonimglib.com/

No reproduction in any form of this document, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.

For Your Safety

To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product.

After reading these safety instructions, keep them readily accessible for future reference.

⚠ WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
⚠ CAUTION: Failure to observe the precautions marked with this icon could result in injury or property damage.

**⚠ WARNING:**

Do not disassemble or modify this product. Do not touch internal parts that become exposed as the result of a fall or other accident.
Failure to observe these precautions could result in electric shock or other injury
Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the camera power source.
Continued operation could result in fire, burns or other injury.
Keep dry. Do not handle with wet hands.
Failure to observe these precautions could result in fire or electric shock.
Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols.
Failure to observe this precaution could result in explosion or fire.
Do not directly view the sun or other bright light source through the lens.
Failure to observe this precaution could result in visual impairment.
Keep this product out of reach of children. Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard.
Should a child swallow any part of this product, seek immediate medical attention.
Do not handle with bare hands in locations exposed to extremely high or low temperatures.
Failure to observe this precaution could result in burns or frostbite.

**⚠ CAUTION**

Do not leave the lens pointed at the sun or other strong light sources.
Light focused by the lens could cause fire or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into the camera when the sun is close to the frame could cause fire.
Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight.
Failure to observe this precaution could result in fire or product malfunction.
Do not transport cameras or lenses with tripods or similar accessories attached.
Failure to observe this precaution could result in injury or product malfunction.

Using the Lens

Parts of the Lens: Names and Functions

The parts of the lens are listed below.

Lens hood mounting mark
Use when attaching the lens hood.
“Attaching and Removing the Optional Lens Hood” (p.14)
Zoom ring
Rotate the ring to zoom in or out.
Focal length scale
Determine the approximate focal length when zooming the lens in or out.
Focal length mark
Determine the approximate focal length when zooming the lens in or out.
Control ring
• Autofocus mode selected:
Rotate the ring to adjust a setting such as [Focus (M/A)] or [Aperture] assigned using the camera. For more information, see the description of [Custom control assignment] , [Custom controls] , or [ Custom controls (shooting)] in the documentation provided with the camera.
• Manual focus mode selected:
Rotate the ring to focus
Lens mounting mark
Use when mounting the lens on the camera.
“Attachment and Removal” (p.11)
CPU contacts
Used to transfer data to and from the camera.
**Lens hood ***
Lens hoods block stray light that would otherwise cause flare or ghosting.
They also serve to protect the lens.
Available separately.
“Attaching and Removing the Optional Lens Hood” (p.14)
Lens hood lock mark
Use when attaching the lens hood.
“Attaching and Removing the Optional Lens Hood” (p.14)
Lens hood alignment mark
Use when attaching the lens hood.
“Attaching and Removing the Optional Lens Hood” (p.14)
Lens cap (front cap)
Lens cap (rear cap)
• The rear lens caps supplied with lens kits may differ from that shown here, in which case ❶ is not required

Attachment and Removal

Attaching the Lens

Turn the camera off, remove the body cap, and detach the rear lens cap.
Position the lens on the camera body, keeping the mounting mark on the lens aligned with the mounting mark on the camera body (❶), and then rotate the lens counterclockwise (❷) until it clicks into place.

Removing the Lens

Turn the camera off.
Press and hold the lens release button (❶) while turning the lens clockwise (❷).

Attaching and Removing the Optional Lens Hood

Align the lens hood mounting mark with the lens hood alignment mark (❶) and then rotate the hood ( ) until the mounting mark is aligned with the lens hood lock mark ( ).

Attaching and Removing the Optional Lens Hood

Align the lens hood mounting mark with the lens hood alignment mark (❶) and then rotate the hood (❷) until the mounting mark is aligned with the lens hood lock mark (❸).

1 Lens hood alignment mark
2 Lens hood mounting mark
3 Lens hood lock mark
Gripping the front too tightly makes the lens hood difficult to attach or remove.
When rotating the lens hood, hold it near the lens hood alignment mark (●).
To remove the lens hood, reverse the above steps.
The lens hood can be reversed and mounted on the lens when not in use.

Vibration Reduction (VR)

The lens supports vibration reduction. Vibration reduction settings can be adjusted from the camera. See the documentation provided with the camera for details.
Vibration reduction allows shutter speeds slower than would otherwise be the case, expanding the range of shutter speeds available.

Vibration Reduction

Due to the design of the vibration reduction system, the lens may rattle when shaken. This does not indicate a malfunction.
To reduce blur caused by tripod shake, select [Normal] or [Sport] for the oncamera vibration reduction option when the camera is mounted on a tripod. Note, however, that depending on the type of tripod and shooting conditions, there may be cases in which [Off] is the preferred option.
[Normal] or [Sport] is recommended when the camera is mounted on a monopod.

Cautions: Taking Photographs

The following restrictions apply when the lens is used with an FX-format camera:
– The camera will use the DX-format image area, which reduces the number of
pixels recorded and the number of focus points.
– The [Image Dust Off ref photo] option in the setup menu cannot be used.
• Videos shot with 1920 × 1080 120p, 1920 × 1080 100p, or 1920 × 1080 slowmotion selected for [Frame size/frame rate] in the movie shooting menu are recorded at the following frame sizes and rates when the lens is mounted on a Z 6:
– 1920 × 1080; 120p → 1920 × 1080; 60p
– 1920 × 1080; 100p → 1920 × 1080; 50p
– 1920 × 1080; 30p ×4 (slow-motion) → 1920 × 1080; 30p
– 1920 × 1080; 25p ×4 (slow-motion) → 1920 × 1080; 25p
– 1920 × 1080; 24p ×5 (slow-motion) → 1920 × 1080; 24p

Precautions for Use

Do not pick up or hold the lens or camera using only the lens caps or lens hood.
Keep the CPU contacts clean.
Reattach the lens caps when the lens is not in use.
Do not leave the lens in humid locations or in locations in which it may be exposed to moisture. Rusting of the internal mechanism can cause irreparable damage.
Do not leave the lens next to open flames or in other extremely hot locations.
Extreme heat could damage or warp the lens.
Taking the lens from a warm to a cold environment or vice versa may cause damaging condensation inside and outside the lens. Place the lens in a sealed bag or plastic case before taking it across a temperature boundary. The lens can be taken from the bag or case once it has had time to adjust to the new temperature.
We recommend that you place the lens in a case (available separately) to protect it from scratches during transport.

Lens Maintenance

Removing dust is normally sufficient to clean the glass surfaces of the lens.
Smudges, fingerprints, and other oily stains can be removed using a soft, clean cotton cloth or third-party lens cleaning tissue lightly dampened with a small amount of ethanol or third-party lens cleaner; clean from the center outwards in a circular motion. Be sure to clean evenly and thoroughly without leaving smears.
Never use organic solvents such as paint thinner or benzene to clean the lens.
Neutral Color (NC) filters (available separately) and the like can be used to protect the front lens element.
Do not store the lens in direct sunlight or with naphtha or camphor moth balls.
If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust.

Technical Notes

Cameras with AF-Assist Illuminators

The lens or lens hood may block the light from the camera AF-assist illuminator.

For the information on using the lens with cameras that have built-in AF-assist illuminators, visit the site below. https://downloadcenter.nikonimglib.com/

Using the Lens on Cameras with a Built-in Flash

Shadows will be visible in photos where light from the built-in flash is obscured by the lens or lens hood. Remove the lens hood before shooting. Note, however, that depending on the distance to the subject, and in the case of zoom lenses also on the lens focal length, shadows may appear even when the lens hood is removed.

For the information on focal lengths and subject distances at which shadows will not appear in photos taken with a built-in flash, visit the site below. https://downloadcenter.nikonimglib.com/

Accessories

Supplied Accessories

LC-62B Lens Cap (front cap)
LF-N1 Lens Cap (rear cap)
_ Different rear caps may be supplied with lens kits._

Other Compatible Accessories

HB-101 Lens Hood
CL-C1 Lens Case
62 mm filters

Filters

Use only one filter at a time.
Remove the lens hood before attaching filters. You will also need to remove the lens hood before rotating circular polarizing filters.

Specifications

Mount	Nikon Z mount
Focal length	18 – 140 mm
Maximum aperture	f/3.5 – 6.3
Lens construction	17 elements in 13 groups (including 2 ED and 2

aspherical elements)
Angle of view| 76° – 11°30′ (DX image area)
Focal length scale| Graduated in millimeters (18, 24, 35, 50, 70, 100, 140)
Focusing system| Internal focusing system
Vibration reduction| Lens shift using v oice c oil m otors (VCMs)
Minimum focus distance (measured from focal plane)|

18 mm zoom position: 0.2 m (0.66 ft)
24 mm zoom position: 0.22 m (0.73 ft)
35 mm zoom position: 0.25 m (0.83 ft)
50 mm zoom position: 0.3 m (0.99 ft)
70 mm zoom position: 0.36 m (1.19 ft)
100 mm zoom position: 0.4 m (1.32 ft)
140 mm zoom position: 0.4 m (1.32 ft)

Maximum reproduction ratio| 0.33×
Diaphragm blades| 7 (rounded diaphragm opening)
Aperture range|

18 mm zoom position: f/3.5 – 22
140 mm zoom position: f/6.3 – 40
The value displayed at minimum aperture may vary with the exposure increment selected on the camera.

Filter-attachment size| 62 mm (P = 0.75 mm）
Dimensions (maximum diameter × distance to end of lens from camera lens mount flange)| Approx. 73 mm × 90 mm (2.9 in. × 3.6 in.)
Weight| Approx. 315 g (11.2 oz)

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.

Notices

Notices for Customers in the U.S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

**User's Manual**

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.

**CAUTIONS**

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.

Nikon Inc., 1300 Walt Whitman Road,Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200

Notices for Customers in Canada

CAN ICES-3 B / NMB-3 B

Notices for Customers in Europe

This symbol indicates that electrical and electronic equipment is to be collected separately.

The following apply only to users in European countries:

This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
For more information, contact the retailer or the local authorities in charge of waste management.

This document lists general maintenance instructions and precautions for using NIKKOR Z lenses. Topics such as lens specifications, supported accessories, and the names and functions of lens controls are detailed in a Reference Guide available from the Nikon Download Center.
Nikon Download Center https://downloadcenter.nikonimglib.com/
Read this document carefully before using this product. You will also need to consult the lens Reference Guide and the documentation provided with your camera.

NIKKOR Z lenses are intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.
Update the camera firmware to the latest version. With earlier versions, the camera may fail to detect the lens correctly and some features may not be available. The latest version of the camera firmware can be downloaded from the Nikon Download Center.
To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product.
After reading these safety instructions, keep them readily accessible for future reference.

⚠ WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
⚠ CAUTION: Failure to observe the precautions marked with this icon could resu lt in injury or property damage.

**⚠ WARNING:**

Do not touch internal parts that become exposed as the result of a fall or other accident. Failure to observe these precautions could result in electric shock or other injury.
Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the camera power source. Continued operation could result in fire, burns or other injury.
Keep dry. Do not handle with wet hands. Failure to observe these precautions could result in fire or electric shock.
Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this precaution could result in explosion or fire.
Do not directly view the sun or other bright light source through the lens. Failure to observe this precaution could result in visual impairment.
Keep this product out of reach of children. Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.
Do not handle with bare hands in locations exposed to extremely high or low temperatures. Failure to observe this precaution could result in burns or frostbite.

**⚠ WARNING:**

Do not leave the lens pointed at the sun or other strong light sources.
Light focused by the lens could cause fire or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into the camera when the sun is close to the frame could cause fire.
Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction.
Do nottransport cameras or lenses with tripods or similar accessories attached. Failure to observe this precaution could result in injury or product malfunction.

**Notices for Customers in the U.S.A.**
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

**Federal Communications Commission (FCC) Radio Frequency Interference Statement**

This equipment has been tested and found to comply with the limits for aClass Bdigital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.

CAUTIONS
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.

Nikon Inc., 1300 Walt Whitman Road,
Melville, New York 11747-3064, U.S.A.
Tel. 631-547-4200
Notice for Customers in Canada
CAN ICES-3 B/ NMB-3 B

**Precautions for Use**

Do not pick up or hold the lens or camera using only the lens caps or lens hood.
Do not hold the telescoping section of extendable lenses.
Be sure to support heavy lenses (such as those with wide apertures or very long focal lengths) at all times while holding the camera. Failure to observe this precaution could damage the lens mount.
Keep the CPU contacts clean.
Some lenses are equipped with a rubber lens-mount gasket. If the gasket is damaged, cease use immediately and take the lens to the point of purchase or to a Nikon-authorized service center for repair.
Reattach the lens caps when the lens is not in use.
Slip-on lens caps (front caps) made of flexible material may crease if folded, but this does not interfere with their function.
Do not leave the lens in humid locations or in locations in which it may be exposed to moisture. Rusting of the internal mechanism can cause irreparable damage.
Do not leave the lens next to open flames or in other extremely hot locations. Extreme heat could damage or warp the lens.
Taking the lens from a warm to a cold environment or vice versa may cause damaging condensation inside and outside the lens. Place the lens in a sealed bag or plastic case before taking it across a temperature boundary. The lens can be taken from the bag or case once it has had time to adjust to the new temperature.
We recommend that you place the lens in a lens case or trunk to protect it from scratches during transport.
Do not sit or stand on lens trunk cases supplied with very long focal length lenses or the like; such acts are dangerous.
Nikon will not be held liable in the event that lenses equipped with a security slot are stolen or damaged while a third-party anti-theft cable is attached.

Using Polyester Lens Cases

Note the following when using polyester lens cases (the CL-Cl, CL-C2, CL-C3, and CL-C4):

The case is intended to protect the lens from scratches, not from falls or other physical shocks.
The material used in the case may fade, bleed, stretch, shrink, or change color when rubbed or wet.
Be careful that the lens does not fall from the case during transpor

Glass Elements
How you care for glass lens elements depends on whether they are fluorine- coated. · · Fluorine-coatedelements:

Fluorine-coated elements:
– A simple dusting is usually sufficient.
– Smudges, fingerprints, and other oily stains can be removed using a soft, clean cotton cloth or third-party lens cleaning tissue; clean from the center outwards using a circular motion.
– To remove stubborn stains, wipe gently using a soft cloth lightly dampened with a small amount of distilled water, ethanol, or third-party lens cleaner.
– Any drop-shaped marks left from this process on the water- and oil-repellent surface can subsequently be removed with a dry cloth.
Elements without a fluorine coat:
– A simple dusting is usually sufficient.
– Smudges, fingerprints, and other oily stains can be removed using a soft, clean cotton cloth or third-party lens cleaning tissue lightly dampened with a small amount of ethanol or third-party lens cleaner; clean from the center outwards in a circular motion. Be sure to clean evenly and thoroughly without leaving smears.
Fluorine-coated elements are identified by the “fluorine-coated” label under “Lens construction” in the “Specifications” section of the lens Reference Guide.

General Maintenance

Never use organic solvents such as paint thinner or benzene to clean the lens.
Neutral Color (NC) filters (available separately) and the like can be used to protect the front lens element. Remove the lens hood before attaching or removing filters.
Do not store with naphtha or camphor moth balls or in direct sunlight. If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust.

Out of concern for the environment, Nikon is working to reduce its use of paper.

ONE YEAR LIMITED WARRANTY

THIS IS YOUR NIKON INC. (VALID INTHE CONTINENTAL UNITED STATES AND HAWAII, PUERTO RICO, AND U.S. VIRGIN ISLANDS), NIKON CANADA INC. (VALID IN ALL CANADIAN PROVINCES AND TERRITORIES) OR NIKON MEXICO, S.A. DE C.V. (VALID IN ALL MEXICAN STATES) (EACH INDIVIDUALLY, AS THE CASE MAY BE, “NIKON”) ONE YEAR LIMITED WARRANTY FOR NEW NIKON CAMERAS, LENSES, SPEEDLIGHTS AND ANY NIKON HARDWARE ITEMS INCLUDED IN THE ACTUAL PRODUCT BOX WITH ANY OF THE FOREGOING (EACH, A “PRODUCT’1, YOU MUST PRESENT THIS WARRANTY FORM TOGETHER WITH YOUR PURCHASE RECEIPTTHAT DISPLAYS THE PURCHASE DATE TO OBTAIN WARRANTY SERVICE.

This Product is warranted by Nikon to be free from defects in material and workmanship for one (1) year from the date of purchase by the original consumer purchaser. During this one year period, if this Product is found to be defective in materfal or workmanship, Nikon will at its option, either repair or replace this Product with aproduct ofcomparable specifications and value, each without charge, orrefund the purchase price shown on your purchase receipt. Except to the extent restricted or prohibited by law, this warranty is subject to the following conditions, limitationsand exclusions:

This warranty extends to the original consumer purchaser only and is not assignable or transferable, unless otherwise required by law.
This warranty shall not apply to any Product which has been subjected to misuse, abuse, abnormal use, negligence, alteration, accident, power surge if the Product contains electronic components, or has had its serial number altered or removed.
This warranty does not apply to any defects or damage directly or indirectly caused by or resulting from the use of unauthorized replacement parts and/or service performed by unauthorized personnel.
This warranty does not apply to any batteries.
This warranty is valid only with authentic Products, sold new by Nikon and purchased from Nikon or its authorized dealers/resellers in the country ofpurchase.
This warranty does not apply to non-Nikon products provided by Nikon, which are instead covered under the warranty, if any, issued by their respective manufacturers.

SUBJECT TO APPLICABLE LAW TO THE CONTRARY, THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ALL OTHER REPRESENTATIONS, WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR COLLATERAL, INCLUDING BUT NOTUMITEDTO ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT, QUALITY OR DURABILITY, AND ALL OTHER OBLIGATIONS ON THE PART OF NIKON PROVIDED, HOWEVER, THAT IF THE DISCLAIMER OF IMPLIED WARRANTIES AND CONDITIONS IS INEFFECTIVE UNDER APPLICABLE LAW, THE DURATION OF ANY IMPLIED WARRANTIES ARISING BY OPERATION OF LAW SHALL BE LIMITED TO ONE YEAR FROM THE DATE OF PURCHASE OR SUCH LONGER PERIOD AS MAY BE REQUIRED BY APPLICABLE LAW.

SUBJECTTO APPLICABLE LAW TO THE CONTRARY, NIKON HEREBY DISCLAIMS ANY AND ALL LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, EXEMPLARY OR PUNITIVE DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY BREACH OFTHIS WARRANTY OR ANY OTHER CLAIM WITH RESPECT TO THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, CLAIMS OF NEGLIGENCE, STRICT LIABILITY IN TORT OR BREACH OF CONTRACT.

SOME STATES/PROVINCES/TERRITORIES DO NOT ALLOW (A) LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR (B) THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY APPLIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND UNLESS RESTRICTED OR PROHIBITED BY LAW. WHERE ANY TERM OFTHIS WARRANTY IS RESTRICTED OR PROHIBITED BY APPLICABLE LAW,.SUCH TERM SHALL BE NULL ANDVOID,,BUTTHE REMAINDER OF THIS WARRANTY SHALL REMAIN IN EFFECT. THIS WARRANTY GIVESYOU SPECIFIC LEGALRIGHTS ANDYOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE/PROVINCE/TERRITORY TO STATE/PROVINCE/TERRITORY.

UNLESS RESTRICTED OR PROHIBITED BY APPLICABLE LAW, THIS WARRANTY JS VALID ONLY IN THE COUNTRY WHERE THE ORIGINAL CONSUMER PURCHASER PURCHASED THE PRODUCT FROM NIKON OR IT$ AUTHORIZED DEALERS/RESELLERS IN THAT COUNTRY.

To obtain performance of the warranty obligations in the country of purchase, the original consumer purchaser must return this Nikon Product together with this warranty form and invoice or purchase receipt displaying the purchase date to the appropriate Nikon service facility. A Nikon authorized dealer stamp may also be accepted as proof of purchase for Mexico. The current address of Nikon’s service facility within the United States can be obtained by visiting www.nikonusa/support or by calling 1-800-645-6687; within Canada: www.nikon.ca/support or by calling 1-877-534-991 O; within Mexico: www.nikon.com.mx/soporte or by calling 001-800-645-6687.

Unless restricted or prohibited by applicable law, in returning this Nikon Product for repair or replacement or refund under this warranty, the original consumer purchaser must prepay all postage, shipping transportation, insurance and delivery costs, and the Nikon Product must be delivered in either its original carton or a similar package affording an equal degree of protection. Nikon will not be responsible for any loss or damage incurred in connection with the return of this Nikon Product.
Nikon Canada Inc. has its principal business address at 1366 Aerowood Drive, Mississauga, ON L4W 1Cl, Canada.

Nikon Inc. has its principal business address at BOO Walt Whitman Road, Melville, NY 11747, United States of America.

Nikon Mexico, S.A de C.V. has its principal business address at Av. Paseo de la Reforma No. 250, Torre Niza, Piso 12, Colonia Juarez, Alcaldfa Cuauhtemoc, C. P. 06600, Ciudad de Mexico. Notice for residents of the country of Mexico: Nikon product accessories and other equipment can be found on Nikon Mexico, S.A de C.V. website at www.nikon.com.mx and its authorized dealers.

THIS WARRANTY FORM MAY NOT BE REPRODUCED OR COPIED AND WILL BE VALID ONLY WITH AUTHENTIC NIKON PRODUCTS.